kernel/linux.git/drivers/dma/xilinx, branch v6.6.132

dmaengine: xilinx_dma: Fix reset related timeout with two-channel AXIDMA

2026-04-02T11:07:32+00:00

[ Upstream commit a17ce4bc6f4f9acf77ba416c36791a15602e53aa ] A single AXIDMA controller can have one or two channels. When it has two channels, the reset for both are tied together: resetting one channel resets the other as well. This creates a problem where resetting one channel will reset the registers for both channels, including clearing interrupt enable bits for the other channel, which can then lead to timeouts as the driver is waiting for an interrupt which never comes. The driver currently has a probe-time work around for this: when a channel is created, the driver also resets and enables the interrupts. With two channels the reset for the second channel will clear the interrupt enables for the first one. The work around in the driver is just to manually enable the interrupts again in xilinx_dma_alloc_chan_resources(). This workaround only addresses the probe-time issue. When channels are reset at runtime (e.g., in xilinx_dma_terminate_all() or during error recovery), there's no corresponding mechanism to restore the other channel's interrupt enables. This leads to one channel having its interrupts disabled while the driver expects them to work, causing timeouts and DMA failures. A proper fix is a complicated matter, as we should not reset the other channel when it's operating normally. So, perhaps, there should be some kind of synchronization for a common reset, which is not trivial to implement. To add to the complexity, the driver also supports other DMA types, like VDMA, CDMA and MCDMA, which don't have a shared reset. However, when the two-channel AXIDMA is used in the (assumably) normal use case, providing DMA for a single memory-to-memory device, the common reset is a bit smaller issue: when something bad happens on one channel, or when one channel is terminated, the assumption is that we also want to terminate the other channel. And thus resetting both at the same time is "ok". With that line of thinking we can implement a bit better work around than just the current probe time work around: let's enable the AXIDMA interrupts at xilinx_dma_start_transfer() instead. This ensures interrupts are enabled whenever a transfer starts, regardless of any prior resets that may have cleared them. This approach is also more logical: enable interrupts only when needed for a transfer, rather than at resource allocation time, and, I think, all the other DMA types should also use this model, but I'm reluctant to do such changes as I cannot test them. The reset function still enables interrupts even though it's not needed for AXIDMA anymore, but it's common code for all DMA types (VDMA, CDMA, MCDMA), so leave it unchanged to avoid affecting other variants. Signed-off-by: Tomi Valkeinen Fixes: c0bba3a99f07 ("dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine") Link: https://patch.msgid.link/20260311-xilinx-dma-fix-v2-1-a725abb66e3c@ideasonboard.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: xilinx: xilinx_dma: Fix unmasked residue subtraction

2026-04-02T11:07:32+00:00

[ Upstream commit c7d812e33f3e8ca0fa9eeabf71d1c7bc3acedc09 ] The segment .control and .status fields both contain top bits which are not part of the buffer size, the buffer size is located only in the bottom max_buffer_len bits. To avoid interference from those top bits, mask out the size using max_buffer_len first, and only then subtract the values. Fixes: a575d0b4e663 ("dmaengine: xilinx_dma: Introduce xilinx_dma_get_residue") Signed-off-by: Marek Vasut Link: https://patch.msgid.link/20260316222530.163815-1-marex@nabladev.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: xilinx: xilinx_dma: Fix residue calculation for cyclic DMA

2026-04-02T11:07:32+00:00

[ Upstream commit f61d145999d61948a23cd436ebbfa4c3b9ab8987 ] The cyclic DMA calculation is currently entirely broken and reports residue only for the first segment. The problem is twofold. First, when the first descriptor finishes, it is moved from active_list to done_list, but it is never returned back into the active_list. The xilinx_dma_tx_status() expects the descriptor to be in the active_list to report any meaningful residue information, which never happens after the first descriptor finishes. Fix this up in xilinx_dma_start_transfer() and if the descriptor is cyclic, lift it from done_list and place it back into active_list list. Second, the segment .status fields of the descriptor remain dirty. Once the DMA did one pass on the descriptor, the .status fields are populated with data by the DMA, but the .status fields are not cleared before reuse during the next cyclic DMA round. The xilinx_dma_get_residue() recognizes that as if the descriptor was complete and had 0 residue, which is bogus. Reinitialize the status field before placing the descriptor back into the active_list. Fixes: c0bba3a99f07 ("dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine") Signed-off-by: Marek Vasut Link: https://patch.msgid.link/20260316221943.160375-1-marex@nabladev.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: xilinx: xilinx_dma: Fix dma_device directions

2026-04-02T11:07:31+00:00

[ Upstream commit e9cc95397bb7da13fe8a5b53a2f23cfaf9018ade ] Unlike chan->direction , struct dma_device .directions field is a bitfield. Turn chan->direction into a bitfield to make it compatible with struct dma_device .directions . Fixes: 7e01511443c3 ("dmaengine: xilinx_dma: Set dma_device directions") Signed-off-by: Marek Vasut Link: https://patch.msgid.link/20260316221728.160139-1-marex@nabladev.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: xilinx: xdma: Fix regmap init error handling

2026-04-02T11:07:31+00:00

[ Upstream commit e0adbf74e2a0455a6bc9628726ba87bcd0b42bf8 ] devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL. Fix the error check and also fix the error message. Use the error code from ERR_PTR() instead of the wrong value in ret. Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver") Signed-off-by: Alexander Stein Reviewed-by: Frank Li Link: https://patch.msgid.link/20251014061309.283468-1-alexander.stein@ew.tq-group.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: xilinx_dma: Fix uninitialized addr_width when "xlnx,addrwidth" property is missing

2026-01-30T09:27:25+00:00

[ Upstream commit c0732fe78728718c853ef8e7af5bbb05262acbd1 ] When device tree lacks optional "xlnx,addrwidth" property, the addr_width variable remained uninitialized with garbage values, causing incorrect DMA mask configuration and subsequent probe failure. The fix ensures a fallback to the default 32-bit address width when this property is missing. Signed-off-by: Suraj Gupta Fixes: b72db4005fe4 ("dmaengine: vdma: Add 64 bit addressing support to the driver") Reviewed-by: Radhey Shyam Pandey Reviewed-by: Folker Schwesinger Link: https://patch.msgid.link/20251021183006.3434495-1-suraj.gupta2@amd.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: xilinx: xdma: Fix regmap max_register

2026-01-30T09:27:25+00:00

[ Upstream commit c7d436a6c1a274c1ac28d5fb3b8eb8f03b6d0e10 ] The max_register field is assigned the size of the register memory region instead of the offset of the last register. The result is that reading from the regmap via debugfs can cause a segmentation fault: tail /sys/kernel/debug/regmap/xdma.1.auto/registers Unable to handle kernel paging request at virtual address ffff800082f70000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault [...] Call trace: regmap_mmio_read32le+0x10/0x30 _regmap_bus_reg_read+0x74/0xc0 _regmap_read+0x68/0x198 regmap_read+0x54/0x88 regmap_read_debugfs+0x140/0x380 regmap_map_read_file+0x30/0x48 full_proxy_read+0x68/0xc8 vfs_read+0xcc/0x310 ksys_read+0x7c/0x120 __arm64_sys_read+0x24/0x40 invoke_syscall.constprop.0+0x64/0x108 do_el0_svc+0xb0/0xd8 el0_svc+0x38/0x130 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198 Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- note: tail[1217] exited with irqs disabled note: tail[1217] exited with preempt_count 1 Segmentation fault Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver") Reviewed-by: Lizhi Hou Reviewed-by: Radhey Shyam Pandey Reviewed-by: Alexander Stein Signed-off-by: Anthony Brandon Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: xilinx_dma: Set dma_device directions

2025-07-06T09:00:06+00:00

[ Upstream commit 7e01511443c30a55a5ae78d3debd46d4d872517e ] Coalesce the direction bits from the enabled TX and/or RX channels into the directions bit mask of dma_device. Without this mask set, dma_get_slave_caps() in the DMAEngine fails, which prevents the driver from being used with an IIO DMAEngine buffer. Signed-off-by: Thomas Gessler Reviewed-by: Suraj Gupta Tested-by: Folker Schwesinger Link: https://lore.kernel.org/r/20250507182101.909010-1-thomas.gessler@brueckmann-gmbh.de Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dma: xilinx_dpdma: Fix locking

2024-05-02T14:32:48+00:00

[ Upstream commit 244296cc3a155199a8b080d19e645d7d49081a38 ] There are several places where either chan->lock or chan->vchan.lock was not held. Add appropriate locking. This fixes lockdep warnings like [ 31.077578] ------------[ cut here ]------------ [ 31.077831] WARNING: CPU: 2 PID: 40 at drivers/dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.077953] Modules linked in: [ 31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 Not tainted 6.6.20+ #98 [ 31.078102] Hardware name: xlnx,zynqmp (DT) [ 31.078169] Workqueue: events_unbound deferred_probe_work_func [ 31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.078377] pc : xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.078473] lr : xilinx_dpdma_chan_queue_transfer+0x270/0x5e0 [ 31.078550] sp : ffffffc083bb2e10 [ 31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: ffffff880165a168 [ 31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480 [ 31.078920] x23: ffffff880165a148 x22: ffffff880164e988 x21: 0000000000000000 [ 31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000 [ 31.079295] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001 [ 31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9 : 0001ffc082aa3def [ 31.079824] x8 : 0001ffc082aa3dec x7 : 0000000000000000 x6 : 0000000000000516 [ 31.079982] x5 : ffffffc7f8d43000 x4 : ffffff88003c9c40 x3 : ffffffffffffffff [ 31.080147] x2 : ffffffc7f8d43000 x1 : 00000000000000c0 x0 : 0000000000000000 [ 31.080307] Call trace: [ 31.080340] xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.080518] xilinx_dpdma_issue_pending+0x11c/0x120 [ 31.080595] zynqmp_disp_layer_update+0x180/0x3ac [ 31.080712] zynqmp_dpsub_plane_atomic_update+0x11c/0x21c [ 31.080825] drm_atomic_helper_commit_planes+0x20c/0x684 [ 31.080951] drm_atomic_helper_commit_tail+0x5c/0xb0 [ 31.081139] commit_tail+0x234/0x294 [ 31.081246] drm_atomic_helper_commit+0x1f8/0x210 [ 31.081363] drm_atomic_commit+0x100/0x140 [ 31.081477] drm_client_modeset_commit_atomic+0x318/0x384 [ 31.081634] drm_client_modeset_commit_locked+0x8c/0x24c [ 31.081725] drm_client_modeset_commit+0x34/0x5c [ 31.081812] __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168 [ 31.081899] drm_fb_helper_set_par+0x50/0x70 [ 31.081971] fbcon_init+0x538/0xc48 [ 31.082047] visual_init+0x16c/0x23c [ 31.082207] do_bind_con_driver.isra.0+0x2d0/0x634 [ 31.082320] do_take_over_console+0x24c/0x33c [ 31.082429] do_fbcon_takeover+0xbc/0x1b0 [ 31.082503] fbcon_fb_registered+0x2d0/0x34c [ 31.082663] register_framebuffer+0x27c/0x38c [ 31.082767] __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c [ 31.082939] drm_fb_helper_initial_config+0x50/0x74 [ 31.083012] drm_fbdev_dma_client_hotplug+0xb8/0x108 [ 31.083115] drm_client_register+0xa0/0xf4 [ 31.083195] drm_fbdev_dma_setup+0xb0/0x1cc [ 31.083293] zynqmp_dpsub_drm_init+0x45c/0x4e0 [ 31.083431] zynqmp_dpsub_probe+0x444/0x5e0 [ 31.083616] platform_probe+0x8c/0x13c [ 31.083713] really_probe+0x258/0x59c [ 31.083793] __driver_probe_device+0xc4/0x224 [ 31.083878] driver_probe_device+0x70/0x1c0 [ 31.083961] __device_attach_driver+0x108/0x1e0 [ 31.084052] bus_for_each_drv+0x9c/0x100 [ 31.084125] __device_attach+0x100/0x298 [ 31.084207] device_initial_probe+0x14/0x20 [ 31.084292] bus_probe_device+0xd8/0xdc [ 31.084368] deferred_probe_work_func+0x11c/0x180 [ 31.084451] process_one_work+0x3ac/0x988 [ 31.084643] worker_thread+0x398/0x694 [ 31.084752] kthread+0x1bc/0x1c0 [ 31.084848] ret_from_fork+0x10/0x20 [ 31.084932] irq event stamp: 64549 [ 31.084970] hardirqs last enabled at (64548): [] _raw_spin_unlock_irqrestore+0x80/0x90 [ 31.085157] hardirqs last disabled at (64549): [] _raw_spin_lock_irqsave+0xc0/0xdc [ 31.085277] softirqs last enabled at (64503): [] __do_softirq+0x47c/0x500 [ 31.085390] softirqs last disabled at (64498): [] ____do_softirq+0x10/0x1c [ 31.085501] ---[ end trace 0000000000000000 ]--- Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver") Signed-off-by: Sean Anderson Reviewed-by: Tomi Valkeinen Link: https://lore.kernel.org/r/20240308210034.3634938-2-sean.anderson@linux.dev Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

Merge tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2023-09-03T17:49:42+00:00

Pull dmaengine updates from Vinod Koul: "New controller support and updates to drivers. New support: - Qualcomm SM6115 and QCM2290 dmaengine support - at_xdma support for microchip,sam9x7 controller Updates: - idxd updates for wq simplification and ats knob updates - fsl edma updates for v3 support - Xilinx AXI4-Stream control support - Yaml conversion for bcm dma binding" * tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (53 commits) dmaengine: fsl-edma: integrate v3 support dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string dmaengine: fsl-edma: move tcd into struct fsl_dma_chan dmaengine: fsl-edma: refactor chan_name setup and safety dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function dmaengine: fsl-edma: refactor using devm_clk_get_enabled dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs() dmaengine: fsl-edma: move common IRQ handler to common.c dmaengine: fsl-edma: Remove enum edma_version dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c dmaengine: fsl-edma: fix build error when arch is s390 dmaengine: idxd: Fix issues with PRS disable sysfs knob dmaengine: idxd: Allow ATS disable update only for configurable devices dmaengine: xilinx_dma: Program interrupt delay timeout dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit dmaengine: xilinx_dma: Increase AXI DMA transaction segment count dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property ...