kernel/linux.git/drivers/dma/ti, branch v6.19.11

dmaengine: omap-dma: fix dma_pool resource leak in error paths

2026-01-11T16:42:44+00:00

The dma_pool created by dma_pool_create() is not destroyed when dma_async_device_register() or of_dma_controller_register() fails, causing a resource leak in the probe error paths. Add dma_pool_destroy() in both error paths to properly release the allocated dma_pool resource. Fixes: 7bedaa553760 ("dmaengine: add OMAP DMA engine driver") Signed-off-by: Haotian Zhang Link: https://patch.msgid.link/20251103073018.643-1-vulab@iscas.ac.cn Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: fix device leak on udma lookup

2025-12-14T09:17:25+00:00

Make sure to drop the reference taken when looking up the UDMA platform device. Note that holding a reference to a platform device does not prevent its driver data from going away so there is no point in keeping the reference after the lookup helper returns. Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users") Fixes: 1438cde8fe9c ("dmaengine: ti: k3-udma: add missing put_device() call in of_xudma_dev_get()") Cc: stable@vger.kernel.org # 5.6: 1438cde8fe9c Cc: Grygorii Strashko Cc: Yu Kuai Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20251117161258.10679-17-johan@kernel.org Signed-off-by: Vinod Koul

dmaengine: ti: dma-crossbar: clean up dra7x route allocation error paths

2025-12-14T09:17:24+00:00

Use a common exit path to drop the cross platform device reference on errors for consistency with am335x. Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20251117161258.10679-16-johan@kernel.org Signed-off-by: Vinod Koul

dmaengine: ti: dma-crossbar: fix device leak on am335x route allocation

2025-12-14T09:17:24+00:00

Make sure to drop the reference taken when looking up the crossbar platform device during am335x route allocation. Fixes: 42dbdcc6bf96 ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx") Cc: stable@vger.kernel.org # 4.4 Cc: Peter Ujfalusi Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20251117161258.10679-15-johan@kernel.org Signed-off-by: Vinod Koul

dmaengine: ti: dma-crossbar: fix device leak on dra7x route allocation

2025-12-14T09:17:24+00:00

Make sure to drop the reference taken when looking up the crossbar platform device during dra7x route allocation. Note that commit 615a4bfc426e ("dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate") fixed the leak in the error paths but the reference is still leaking on successful allocation. Fixes: a074ae38f859 ("dmaengine: Add driver for TI DMA crossbar on DRA7x") Fixes: 615a4bfc426e ("dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate") Cc: stable@vger.kernel.org # 4.2: 615a4bfc426e Cc: Peter Ujfalusi Cc: Miaoqian Lin Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20251117161258.10679-14-johan@kernel.org Signed-off-by: Vinod Koul

dmaengine: ti: edma: Fix memory allocation size for queue_priority_map

2025-09-02T06:35:18+00:00

Fix a critical memory allocation bug in edma_setup_from_hw() where queue_priority_map was allocated with insufficient memory. The code declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8), but allocated memory using sizeof(s8) instead of the correct size. This caused out-of-bounds memory writes when accessing: queue_priority_map[i][0] = i; queue_priority_map[i][1] = i; The bug manifested as kernel crashes with "Oops - undefined instruction" on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the memory corruption triggered kernel hardening features on Clang. Change the allocation to use sizeof(*queue_priority_map) which automatically gets the correct size for the 2D array structure. Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/") Signed-off-by: Anders Roxell Link: https://lore.kernel.org/r/20250830094953.3038012-1-anders.roxell@linaro.org Signed-off-by: Vinod Koul

dmaengine: ti: Do not enable by default during compile testing

2025-06-26T22:34:19+00:00

Enabling the compile test should not cause automatic enabling of all drivers. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250404122114.359087-2-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul

Merge tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2025-06-05T15:49:30+00:00

Pull dmaengine updates from Vinod Koul: "A fairly small update for the dmaengine subsystem. This has a new ARM dmaengine driver and couple of new device support and few driver changes: New support: - Renesas RZ/V2H(P) dma support for r9a09g057 - Arm DMA-350 driver - Tegra Tegra264 ADMA support Updates: - AMD ptdma driver code removal and optimizations - Freescale edma error interrupt handler support" * tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits) dmaengine: idxd: Remove unused pointer and macro arm64: dts: renesas: r9a09g057: Add DMAC nodes dmaengine: sh: rz-dmac: Add RZ/V2H(P) support dmaengine: sh: rz-dmac: Allow for multiple DMACs irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req() dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only dmaengine: ti: Add NULL check in udma_probe() fsldma: Set correct dma_mask based on hw capability dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using dmaengine: xilinx_dma: Set dma_device directions dmaengine: tegra210-adma: Add Tegra264 support dt-bindings: Document Tegra264 ADMA support dmaengine: dw-edma: Add HDMA NATIVE map check dmaegnine: fsl-edma: add edma error interrupt handler dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names dmaengine: ARM_DMA350 should depend on ARM/ARM64 dt-bindings: dma: qcom,bam: Document dma-coherent property dmaengine: Add Arm DMA-350 driver ...

dmaengine: ti: Add NULL check in udma_probe()

2025-05-14T14:27:23+00:00

devm_kasprintf() returns NULL when memory allocation fails. Currently, udma_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue. Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Henry Martin Reviewed-by: Nathan Lynch Acked-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20250402023900.43440-1-bsdhenrymartin@gmail.com Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Add missing locking

2025-04-17T15:06:34+00:00

Recent kernels complain about a missing lock in k3-udma.c when the lock validator is enabled: [ 4.128073] WARNING: CPU: 0 PID: 746 at drivers/dma/ti/../virt-dma.h:169 udma_start.isra.0+0x34/0x238 [ 4.137352] CPU: 0 UID: 0 PID: 746 Comm: kworker/0:3 Not tainted 6.12.9-arm64 #28 [ 4.144867] Hardware name: pp-v12 (DT) [ 4.148648] Workqueue: events udma_check_tx_completion [ 4.153841] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.160834] pc : udma_start.isra.0+0x34/0x238 [ 4.165227] lr : udma_start.isra.0+0x30/0x238 [ 4.169618] sp : ffffffc083cabcf0 [ 4.172963] x29: ffffffc083cabcf0 x28: 0000000000000000 x27: ffffff800001b005 [ 4.180167] x26: ffffffc0812f0000 x25: 0000000000000000 x24: 0000000000000000 [ 4.187370] x23: 0000000000000001 x22: 00000000e21eabe9 x21: ffffff8000fa0670 [ 4.194571] x20: ffffff8001b6bf00 x19: ffffff8000fa0430 x18: ffffffc083b95030 [ 4.201773] x17: 0000000000000000 x16: 00000000f0000000 x15: 0000000000000048 [ 4.208976] x14: 0000000000000048 x13: 0000000000000000 x12: 0000000000000001 [ 4.216179] x11: ffffffc08151a240 x10: 0000000000003ea1 x9 : ffffffc08046ab68 [ 4.223381] x8 : ffffffc083cabac0 x7 : ffffffc081df3718 x6 : 0000000000029fc8 [ 4.230583] x5 : ffffffc0817ee6d8 x4 : 0000000000000bc0 x3 : 0000000000000000 [ 4.237784] x2 : 0000000000000000 x1 : 00000000001fffff x0 : 0000000000000000 [ 4.244986] Call trace: [ 4.247463] udma_start.isra.0+0x34/0x238 [ 4.251509] udma_check_tx_completion+0xd0/0xdc [ 4.256076] process_one_work+0x244/0x3fc [ 4.260129] process_scheduled_works+0x6c/0x74 [ 4.264610] worker_thread+0x150/0x1dc [ 4.268398] kthread+0xd8/0xe8 [ 4.271492] ret_from_fork+0x10/0x20 [ 4.275107] irq event stamp: 220 [ 4.278363] hardirqs last enabled at (219): [] _raw_spin_unlock_irq+0x38/0x50 [ 4.287183] hardirqs last disabled at (220): [] el1_dbg+0x24/0x50 [ 4.294879] softirqs last enabled at (182): [] handle_softirqs+0x1c0/0x3cc [ 4.303437] softirqs last disabled at (177): [] __do_softirq+0x1c/0x28 [ 4.311559] ---[ end trace 0000000000000000 ]--- This commit adds the missing locking. Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA") Cc: Peter Ujfalusi Cc: Vignesh Raghavendra Cc: Vinod Koul Cc: dmaengine@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Ronald Wahl Acked-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20250414173113.80677-1-rwahl@gmx.de Signed-off-by: Vinod Koul