kernel/linux.git/drivers/dma/ti, branch v5.6.17

dmaengine: ti: k3-udma: Fix TR mode flags for slave_sg and memcpy

2020-06-07T11:16:45+00:00

[ Upstream commit be4054b8b6671ebc977eb7774b8e889d2d05d3e3 ] cppi5_tr_csf_set() clears previously set Configuration Specific Flags. Setting the EOP flag clears the SUPR_EVT flag for the last TR which is not desirable as we do not want to have events from the TR. Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200512134531.5742-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: ti: k3-psil: fix deadlock on error path

2020-05-06T06:16:45+00:00

commit 172d59ecd61b89f535ad99a7e531c0f111453b9a upstream. The mutex_unlock() is missed on error path of psil_get_ep_config() which causes deadlock, so add missed mutex_unlock(). Fixes: 8c6bb62f6b4a ("dmaengine: ti: k3 PSI-L remote endpoint configuration") Signed-off-by: Grygorii Strashko Acked-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200408185501.30776-1-grygorii.strashko@ti.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: ti: k3-udma-glue: Fix an error handling path in 'k3_udma_glue_cfg_rx_flow()'

2020-03-23T06:18:34+00:00

All but one error handling paths in the 'k3_udma_glue_cfg_rx_flow()' function 'goto err' and call 'k3_udma_glue_release_rx_flow()'. This not correct because this function has a 'channel->flows_ready--;' at the end, but 'flows_ready' has not been incremented here, when we branch to the error handling path. In order to keep a correct value in 'flows_ready', un-roll 'k3_udma_glue_release_rx_flow()', simplify it, add some labels and branch at the correct places when an error is detected. Doing so, we also NULLify 'flow->udma_rflow' in a path that was lacking it. Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine user") Signed-off-by: Christophe JAILLET Acked-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200318191209.1267-1-christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Fix terminated transfer handling

2020-02-19T07:39:11+00:00

When we receive back the descriptor of the terminated transfer the cookie must be marked as completed to make sure that the accounting is correct. In udma_tx_status() the status should be marked as completed if the channel is no longer running (it can only happen if the channel is not yet started for the first time, or after a channel termination). Fixes: 25dcb5dd7b7ce ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200214091441.27535-7-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Use the channel direction in pause/resume functions

2020-02-19T07:39:11+00:00

It should be possible to pause, resume and check the pause state of a channel even if we do not have active transfer. udma_is_chan_paused() can trigger NULL pointer reference in it's current form when the status is checked while uc->desc is NULL. Fixes: 25dcb5dd7b7ce ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200214091441.27535-6-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic

2020-02-19T07:39:11+00:00

Use the generic TR setup function to get the TR counters for both cyclic and slave_sg transfers. This way the period_size for cyclic and sg_dma_len() for slave_sg can be as large as (SZ_64K - 1) * (SZ_64K - 1) and we can handle cases when the length is >SZ_64K and a prime number. Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200214091441.27535-5-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Move the TR counter calculation to helper function

2020-02-19T07:39:11+00:00

Move the TR counter parameter configuration code out from the prep_memcpy callback to a helper function to allow a generic re-usable code for other TR based transfers. Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200214091441.27535-4-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Workaround for RX teardown with stale data in peer

2020-02-19T07:39:10+00:00

When a channel is asked to be stopped (teardown) and we do not have active descriptor to receive stale data buffered on the remote side then the teardown will not complete as UDMA needs a descriptor to be able to flush out the DMA pipe. The peer is trying to push the data to UDMA in teardown, but UDMA is pushing back because it has no descriptor which would allow it to drain the data. The workaround is to create 1K 'trashcan' to receive the discarded data and set up descriptors for packet and TR mode channels. When a channel is stopped and there is no active descriptor then a descriptor is pushed to the ring for UDMA before the teardown is initiated. Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200214091441.27535-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Use ktime/usleep_range based TX completion check

2020-02-19T07:39:10+00:00

In some cases (McSPI for example) the jiffie and delayed_work based workaround can cause big throughput drop. Switch to use ktime/usleep_range based implementation to be able to sustain speed for PDMA based peripherals. Signed-off-by: Vignesh Raghavendra Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200214091441.27535-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T21:58:44+00:00

Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...