kernel/linux.git/drivers/dma/sh, branch v6.19.11

dmaengine: sh: rz-dmac: Move CHCTRL updates under spinlock

2026-04-02T11:25:46+00:00

commit 89a8567d84bde88cb7cdbbac2ab2299c4f991490 upstream. Both rz_dmac_disable_hw() and rz_dmac_irq_handle_channel() update the CHCTRL register. To avoid concurrency issues when configuring functionalities exposed by this registers, take the virtual channel lock. All other CHCTRL updates were already protected by the same lock. Previously, rz_dmac_disable_hw() disabled and re-enabled local IRQs, before accessing CHCTRL registers but this does not ensure race-free access. Remove the local IRQ disable/enable code as well. Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Cc: stable@vger.kernel.org Reviewed-by: Biju Das Reviewed-by: Frank Li Signed-off-by: Claudiu Beznea Link: https://patch.msgid.link/20260316133252.240348-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: rz-dmac: Protect the driver specific lists

2026-04-02T11:25:46+00:00

commit abb863e6213dc41a58ef8bb3289b7e77460dabf3 upstream. The driver lists (ld_free, ld_queue) are used in rz_dmac_free_chan_resources(), rz_dmac_terminate_all(), rz_dmac_issue_pending(), and rz_dmac_irq_handler_thread(), all under the virtual channel lock. Take the same lock in rz_dmac_prep_slave_sg() and rz_dmac_prep_dma_memcpy() as well to avoid concurrency issues, since these functions also check whether the lists are empty and update or remove list entries. Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Cc: stable@vger.kernel.org Reviewed-by: Frank Li Signed-off-by: Claudiu Beznea Link: https://patch.msgid.link/20260316133252.240348-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: rz-dmac: Fix rz_dmac_terminate_all()

2025-12-16T16:09:17+00:00

After audio full duplex testing, playing the recorded file contains a few playback frames from the previous time. The rz_dmac_terminate_all() does not reset all the hardware descriptors queued previously, leading to the wrong descriptor being picked up during the next DMA transfer. Fix the above issue by resetting all the descriptor headers for a channel in rz_dmac_terminate_all() as rz_dmac_lmdesc_recycle() points to the proper descriptor header filled by the rz_dmac_prepare_descs_for_slave_sg(). Cc: stable@kernel.org Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Reviewed-by: Geert Uytterhoeven Signed-off-by: Biju Das Reviewed-by: Claudiu Beznea Tested-by: Claudiu Beznea Link: https://patch.msgid.link/20251113195052.564338-1-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul

dmaengine: sh: rz-dmac: fix device leak on probe failure

2025-12-14T09:17:24+00:00

Make sure to drop the reference taken when looking up the ICU device during probe also on probe failures (e.g. probe deferral). Fixes: 7de873201c44 ("dmaengine: sh: rz-dmac: Add RZ/V2H(P) support") Cc: stable@vger.kernel.org # 6.16 Cc: Fabrizio Castro Signed-off-by: Johan Hovold Reviewed-by: Fabrizio Castro Link: https://patch.msgid.link/20251117161258.10679-10-johan@kernel.org Signed-off-by: Vinod Koul

dmaengine: sh: Kconfig: Drop ARCH_R7S72100/ARCH_RZG2L dependency

2025-10-16T12:12:59+00:00

The RZ DMA controller is used across multiple Renesas SoCs, not only RZ/A1 (R7S72100) and RZ/G2L. Limiting the build to these SoCs prevents enabling the driver on newer platforms such as RZ/V2H(P) and RZ/V2N. Replace the ARCH_R7S72100 || ARCH_RZG2L dependency with ARCH_RENESAS so the driver can be built for all Renesas SoCs. Signed-off-by: Lad Prabhakar Reviewed-by: Geert Uytterhoeven Signed-off-by: Vinod Koul

dmaengine: rcar-dmac: Convert to NOIRQ_SYSTEM_SLEEP/RUNTIME_PM_OPS()

2025-10-16T12:12:01+00:00

Convert the Renesas R-Car DMA Controller driver from SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() to NOIRQ_SYSTEM_SLEEP_PM_OPS(), RUNTIME_PM_OPS(), and pm_ptr(). This lets us drop the check for CONFIG_PM, and reduces kernel size in case CONFIG_PM is disabled, while increasing build coverage. Signed-off-by: Geert Uytterhoeven Signed-off-by: Vinod Koul

dmaengine: rcar-dmac: Remove dummy Runtime PM callback

2025-10-16T12:11:58+00:00

Since commit 63d00be69348fda4 ("PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks"), unassigned .runtime_{suspend,resume}() callbacks are treated the same as dummy callbacks that just return zero. Signed-off-by: Geert Uytterhoeven Signed-off-by: Vinod Koul

dmaengine: sh: usb-dmac: Convert to NOIRQ_SYSTEM_SLEEP/RUNTIME_PM_OPS()

2025-10-16T12:11:45+00:00

Convert the Renesas USB-DMA Controller driver from SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() to NOIRQ_SYSTEM_SLEEP_PM_OPS(), RUNTIME_PM_OPS(), and pm_ptr(). This lets us drop the check for CONFIG_PM, and reduces kernel size in case CONFIG_PM is disabled, while increasing build coverage. Signed-off-by: Geert Uytterhoeven Signed-off-by: Vinod Koul

dmaengine: sh: setup_xref error handling

2025-09-02T06:59:36+00:00

This patch modifies the type of setup_xref from void to int and handles errors since the function can fail. `setup_xref` now returns the (eventual) error from `dmae_set_dmars`|`dmae_set_chcr`, while `shdma_tx_submit` handles the result, removing the chunks from the queue and marking PM as idle in case of an error. Signed-off-by: Thomas Andreatta Link: https://lore.kernel.org/r/20250827152442.90962-1-thomas.andreatta2000@gmail.com Signed-off-by: Vinod Koul

dmaengine: sh: Do not enable SH_DMAE_BASE by default during compile testing

2025-06-26T22:34:19+00:00

Enabling the compile test should not cause automatic enabling of all drivers. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250404122114.359087-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul