kernel/linux.git/drivers/dma/sh, branch v6.12.80

dmaengine: sh: rz-dmac: Move CHCTRL updates under spinlock

2026-04-02T11:09:45+00:00

commit 89a8567d84bde88cb7cdbbac2ab2299c4f991490 upstream. Both rz_dmac_disable_hw() and rz_dmac_irq_handle_channel() update the CHCTRL register. To avoid concurrency issues when configuring functionalities exposed by this registers, take the virtual channel lock. All other CHCTRL updates were already protected by the same lock. Previously, rz_dmac_disable_hw() disabled and re-enabled local IRQs, before accessing CHCTRL registers but this does not ensure race-free access. Remove the local IRQ disable/enable code as well. Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Cc: stable@vger.kernel.org Reviewed-by: Biju Das Reviewed-by: Frank Li Signed-off-by: Claudiu Beznea Link: https://patch.msgid.link/20260316133252.240348-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: rz-dmac: Protect the driver specific lists

2026-04-02T11:09:45+00:00

commit abb863e6213dc41a58ef8bb3289b7e77460dabf3 upstream. The driver lists (ld_free, ld_queue) are used in rz_dmac_free_chan_resources(), rz_dmac_terminate_all(), rz_dmac_issue_pending(), and rz_dmac_irq_handler_thread(), all under the virtual channel lock. Take the same lock in rz_dmac_prep_slave_sg() and rz_dmac_prep_dma_memcpy() as well to avoid concurrency issues, since these functions also check whether the lists are empty and update or remove list entries. Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Cc: stable@vger.kernel.org Reviewed-by: Frank Li Signed-off-by: Claudiu Beznea Link: https://patch.msgid.link/20260316133252.240348-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: rz-dmac: Fix rz_dmac_terminate_all()

2026-01-23T10:18:49+00:00

commit 747213b08a1ab6a76e3e3b3e7a209cc1d402b5d0 upstream. After audio full duplex testing, playing the recorded file contains a few playback frames from the previous time. The rz_dmac_terminate_all() does not reset all the hardware descriptors queued previously, leading to the wrong descriptor being picked up during the next DMA transfer. Fix the above issue by resetting all the descriptor headers for a channel in rz_dmac_terminate_all() as rz_dmac_lmdesc_recycle() points to the proper descriptor header filled by the rz_dmac_prepare_descs_for_slave_sg(). Cc: stable@kernel.org Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Reviewed-by: Geert Uytterhoeven Signed-off-by: Biju Das Reviewed-by: Claudiu Beznea Tested-by: Claudiu Beznea Link: https://patch.msgid.link/20251113195052.564338-1-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: setup_xref error handling

2025-11-13T20:34:18+00:00

[ Upstream commit d9a3e9929452780df16f3414f0d59b5f69d058cf ] This patch modifies the type of setup_xref from void to int and handles errors since the function can fail. `setup_xref` now returns the (eventual) error from `dmae_set_dmars`|`dmae_set_chcr`, while `shdma_tx_submit` handles the result, removing the chunks from the queue and marking PM as idle in case of an error. Signed-off-by: Thomas Andreatta Link: https://lore.kernel.org/r/20250827152442.90962-1-thomas.andreatta2000@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: sh: rz-dmac: handle configs where one address is zero

2024-10-14T17:40:58+00:00

Configs like the ones coming from the MMC subsystem will have either 'src' or 'dst' zeroed, resulting in an unknown bus width. This will bail out on the RZ DMA driver because of the sanity check for a valid bus width. Reorder the code, so that the check will only be applied when the corresponding address is non-zero. Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Signed-off-by: Wolfram Sang Reviewed-by: Biju Das Reviewed-by: Geert Uytterhoeven Tested-by: Biju Das Tested-by: Claudiu Beznea Link: https://lore.kernel.org/r/20241007110200.43166-6-wsa+renesas@sang-engineering.com Signed-off-by: Vinod Koul

Merge tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2024-09-23T21:08:08+00:00

Pull dmaengine updates from Vinod Koul: "Unusually, more new driver and device support than updates. Couple of new device support, AMD, Rcar, Intel and New drivers in Freescale, Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc. New support: - Support for AMD Versal Gen 2 DMA IP - Rcar RZ/G3S SoC dma controller - Support for Intel Diamond Rapids and Granite Rapids-D dma controllers - Support for Freescale ls1021a-qdma controller - New driver for Loongson-1 APB DMA - New driver for AMD QDMA - Pl08x in LPC32XX router dma driver Updates: - Support for dpdma cyclic dma mode - XML conversion for marvell xor dma bindings - Dma clocks documentation for imx dma" * tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits) dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname dmaengine: Fix spelling mistakes dmaengine: Add dma router for pl08x in LPC32XX SoC dmaengine: fsl-edma: add edma src ID check at request channel dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate() dmaengine: avoid non-constant format string dmaengine: imx-dma: Remove i.MX21 support dt-bindings: dma: fsl,imx-dma: Document the DMA clocks dmaengine: Loongson1: Add Loongson-1 APB DMA driver dt-bindings: dma: Add Loongson-1 APB DMA dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform dmaengine: ti: k3-udma: Remove unused declarations dmaengine: amd: qdma: Add AMD QDMA driver dmaengine: xilinx: dpdma: Add support for cyclic dma mode dma: ipu: Remove include/linux/dma/ipu-dma.h dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh" dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma ...

dmaengine: Fix spelling mistakes

2024-09-02T08:26:01+00:00

Correct spelling mistakes in the DMA engine to improve readability and clarity without altering functionality. Signed-off-by: Amit Vadhavana Reviewed-by: Kees Cook Reviewed-by: Dave Jiang Reviewed-by: Fenghua Yu Link: https://lore.kernel.org/r/20240831172949.13189-1-av2082000@gmail.com Signed-off-by: Vinod Koul

dma-mapping: don't return errors from dma_set_max_seg_size

2024-08-29T04:22:49+00:00

A NULL dev->dma_parms indicates either a bus that is not DMA capable or grave bug in the implementation of the bus code. There isn't much the driver can do in terms of error handling for either case, so just warn and continue as DMA operations will fail anyway. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy Reviewed-by: Martin K. Petersen Acked-by: Ulf Hansson # For MMC

dmaengine: sh: rz-dmac: Fix lockdep assert warning

2024-06-28T07:19:27+00:00

Fix the below lockdep assert warning by holding vc.lock for vchan_get_all_descriptors(). WARNING: virt-dma.h:188 rz_dmac_terminate_all pc : rz_dmac_terminate_all Signed-off-by: Biju Das Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20240625170119.173595-1-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul

dmaengine: shdma: increase size of 'dev_id'

2024-01-19T12:42:10+00:00

We seem to have hit warnings of 'output may be truncated' which is fixed by increasing the size of 'dev_id' drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’: drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=] 541 | "sh-dmae%d.%d", pdev->id, id); | ^~ In function ‘sh_dmae_chan_probe’, inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9: drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647] 541 | "sh-dmae%d.%d", pdev->id, id); | ^~~~~~~~~~~~~~ drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19] drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16 540 | snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 541 | "sh-dmae%d.%d", pdev->id, id); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Vinod Koul