kernel/linux.git/drivers/dma/sh, branch v6.1.168

dmaengine: sh: rz-dmac: Move CHCTRL updates under spinlock

2026-04-11T12:16:15+00:00

commit 89a8567d84bde88cb7cdbbac2ab2299c4f991490 upstream. Both rz_dmac_disable_hw() and rz_dmac_irq_handle_channel() update the CHCTRL register. To avoid concurrency issues when configuring functionalities exposed by this registers, take the virtual channel lock. All other CHCTRL updates were already protected by the same lock. Previously, rz_dmac_disable_hw() disabled and re-enabled local IRQs, before accessing CHCTRL registers but this does not ensure race-free access. Remove the local IRQ disable/enable code as well. Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Cc: stable@vger.kernel.org Reviewed-by: Biju Das Reviewed-by: Frank Li Signed-off-by: Claudiu Beznea Link: https://patch.msgid.link/20260316133252.240348-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: rz-dmac: Protect the driver specific lists

2026-04-11T12:16:15+00:00

commit abb863e6213dc41a58ef8bb3289b7e77460dabf3 upstream. The driver lists (ld_free, ld_queue) are used in rz_dmac_free_chan_resources(), rz_dmac_terminate_all(), rz_dmac_issue_pending(), and rz_dmac_irq_handler_thread(), all under the virtual channel lock. Take the same lock in rz_dmac_prep_slave_sg() and rz_dmac_prep_dma_memcpy() as well to avoid concurrency issues, since these functions also check whether the lists are empty and update or remove list entries. Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Cc: stable@vger.kernel.org Reviewed-by: Frank Li Signed-off-by: Claudiu Beznea Link: https://patch.msgid.link/20260316133252.240348-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: rz-dmac: Fix rz_dmac_terminate_all()

2026-02-06T15:44:02+00:00

commit 747213b08a1ab6a76e3e3b3e7a209cc1d402b5d0 upstream. After audio full duplex testing, playing the recorded file contains a few playback frames from the previous time. The rz_dmac_terminate_all() does not reset all the hardware descriptors queued previously, leading to the wrong descriptor being picked up during the next DMA transfer. Fix the above issue by resetting all the descriptor headers for a channel in rz_dmac_terminate_all() as rz_dmac_lmdesc_recycle() points to the proper descriptor header filled by the rz_dmac_prepare_descs_for_slave_sg(). Cc: stable@kernel.org Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Reviewed-by: Geert Uytterhoeven Signed-off-by: Biju Das Reviewed-by: Claudiu Beznea Tested-by: Claudiu Beznea Link: https://patch.msgid.link/20251113195052.564338-1-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: setup_xref error handling

2025-12-06T21:12:21+00:00

[ Upstream commit d9a3e9929452780df16f3414f0d59b5f69d058cf ] This patch modifies the type of setup_xref from void to int and handles errors since the function can fail. `setup_xref` now returns the (eventual) error from `dmae_set_dmars`|`dmae_set_chcr`, while `shdma_tx_submit` handles the result, removing the chunks from the queue and marking PM as idle in case of an error. Signed-off-by: Thomas Andreatta Link: https://lore.kernel.org/r/20250827152442.90962-1-thomas.andreatta2000@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: shdma: increase size of 'dev_id'

2024-03-01T12:26:25+00:00

[ Upstream commit 404290240827c3bb5c4e195174a8854eef2f89ac ] We seem to have hit warnings of 'output may be truncated' which is fixed by increasing the size of 'dev_id' drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’: drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=] 541 | "sh-dmae%d.%d", pdev->id, id); | ^~ In function ‘sh_dmae_chan_probe’, inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9: drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647] 541 | "sh-dmae%d.%d", pdev->id, id); | ^~~~~~~~~~~~~~ drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19] drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16 540 | snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 541 | "sh-dmae%d.%d", pdev->id, id); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: sh: rz-dmac: Fix destination and source data size setting

2023-09-19T10:28:04+00:00

commit c6ec8c83a29fb3aec3efa6fabbf5344498f57c7f upstream. Before setting DDS and SDS values, we need to clear its value first otherwise, we get incorrect results when we change/update the DMA bus width several times due to the 'OR' expression. Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Cc: stable@kernel.org Signed-off-by: Hien Huynh Signed-off-by: Biju Das Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20230706112150.198941-3-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: rcar-dmac: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper

2022-09-29T15:44:32+00:00

Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/217 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Link: https://lore.kernel.org/r/YzIdsJqsR3LH2qEK@work Signed-off-by: Vinod Koul

dmaengine: sh: rz-dmac: Add device_synchronize callback

2022-07-26T12:57:50+00:00

Some on-chip peripheral modules(for eg:- rspi) on RZ/G2L SoC use the same signal for both interrupt and DMA transfer requests. The signal works as a DMA transfer request signal by setting DMARS, and subsequent interrupt requests to the interrupt controller are masked. We can re-enable the interrupt by clearing the DMARS. This patch adds device_synchronize callback for clearing DMARS and thereby allowing DMA consumers to switch to interrupt mode. Signed-off-by: Biju Das Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20220722084430.969333-1-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul

dmaengine: sh: Kconfig: Make RZ_DMAC depend on ARCH_RZG2L

2022-04-08T17:52:00+00:00

The DMAC block is identical on Renesas RZ/G2L, RZ/G2UL and RZ/V2L SoC's, so instead of adding dependency for each SoC's add dependency on ARCH_RZG2L. The ARCH_RZG2L config option is already selected by ARCH_R9A07G043, ARCH_R9A07G044 and ARCH_R9A07G054. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220406080417.14593-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Vinod Koul

dmaengine: sh: Kconfig: Add ARCH_R9A07G054 dependency for RZ_DMAC config option

2022-03-11T07:04:05+00:00

RZ/V2L DMA block is identical to one found on RZ/G2L SoC. This patch adds ARCH_R9A07G054 dependency for RZ_DMAC config option so that the driver can be enabled on RZ/V2L SoC. While at it, also update config help text. Signed-off-by: Lad Prabhakar Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20220221224321.11939-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Vinod Koul