kernel/linux.git/drivers/dma/sh, branch v5.4.113

dmaengine: sh: usb-dmac: set tx_result parameters

2020-07-22T07:33:00+00:00

[ Upstream commit 466257d9968ac79575831250b039dc07566c7b13 ] A client driver (renesas_usbhs) assumed that dmaengine_tx_status() could return the residue even if the transfer was completed. However, this was not correct usage [1] and this caused to break getting the residue after the commit 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") actually. So, this is possible to get wrong received size if the usb controller gets a short packet. For example, g_zero driver causes "bad OUT byte" errors. To use the tx_result from the renesas_usbhs driver when the transfer is completed, set the tx_result parameters. Notes that the renesas_usbhs driver needs to update for it. [1] https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/ Reported-by: Hien Dang Fixes: 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1592482053-19433-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

Merge tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2019-09-18T02:04:40+00:00

Pull dmaengine updates from Vinod Koul: - Move Dmaengine DT bindings to YAML and convert Allwinner to schema. - FSL dma device_synchronize implementation - DW split acpi and of helpers and updates to driver and support for Elkhart Lake - Move filter fn as private for omap-dma and edma drivers and improvements to these drivers - Mark expected switch fall-through in couple of drivers - Renames of shdma and nbpfaxi binding document - Minor updates to bunch of drivers * tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits) dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits() dmaengine: ti: edma: Only reset region0 access registers dmaengine: ti: edma: Do not reset reserved paRAM slots dmaengine: iop-adma.c: fix printk format warning dmaengine: stm32-dma: Use struct_size() helper dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property dmanegine: ioat/dca: Use struct_size() helper dmaengine: iop-adma: remove set but not used variable 'slots_per_op' dmaengine: dmatest: Add support for completion polling dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status() dmaengine: ti: omap-dma: Remove 'Assignment in if condition' dmaengine: ti: edma: Remove 'Assignment in if condition' dmaengine: dw: platform: Split OF helpers to separate module dmaengine: dw: platform: Split ACPI helpers to separate module dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register() dmaengine: dw: platform: Switch to acpi_dma_controller_register() dmaengine: dw: platform: Use devm_platform_ioremap_resource() dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw: platform: Use struct dw_dma_chip_pdata dmaengine: dw: Export struct dw_dma_chip_pdata for wider use ...

dmaengine: rcar-dmac: Fix DMACHCLR handling if iommu is mapped

2019-09-04T06:05:58+00:00

The commit 20c169aceb45 ("dmaengine: rcar-dmac: clear pertinence number of channels") forgets to clear the last channel by DMACHCLR in rcar_dmac_init() (and doesn't need to clear the first channel) if iommu is mapped to the device. So, this patch fixes it by using "channels_mask" bitfield. Note that the hardware and driver don't support more than 32 bits in DMACHCLR register anyway, so this patch should reject more than 32 channels in rcar_dmac_parse_of(). Fixes: 20c169aceb459575 ("dmaengine: rcar-dmac: clear pertinence number of channels") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/1567424643-26629-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul

dmaengine: Remove dev_err() usage after platform_get_irq()

2019-07-31T15:20:53+00:00

We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // While we're here, remove braces on if statements that only have one statement (manually). Cc: Vinod Koul Cc: Dan Williams Cc: dmaengine@vger.kernel.org Cc: Greg Kroah-Hartman Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20190730181557.90391-11-swboyd@chromium.org Signed-off-by: Vinod Koul

dmaengine: rcar-dmac: Reject zero-length slave DMA requests

2019-06-25T04:38:22+00:00

While the .device_prep_slave_sg() callback rejects empty scatterlists, it still accepts single-entry scatterlists with a zero-length segment. These may happen if a driver calls dmaengine_prep_slave_single() with a zero len parameter. The corresponding DMA request will never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and DMA timeouts. Although requesting a zero-length DMA request is a driver bug, rejecting it early eases debugging. Note that the .device_prep_dma_memcpy() callback already rejects requests to copy zero bytes. Reported-by: Eugeniu Rosca Analyzed-by: Yoshihiro Shimoda Signed-off-by: Geert Uytterhoeven Signed-off-by: Vinod Koul

dmaengine: sh: usb-dmac: Use [] to denote a flexible array member

2019-06-25T04:27:42+00:00

Flexible array members should be denoted using [] instead of [0], else gcc will not warn when they are no longer at the end of the structure. Signed-off-by: Geert Uytterhoeven Reviewed-by: Simon Horman Signed-off-by: Vinod Koul

dmaengine: sh: usb-dmac: Let the core do the device node validation

2019-05-27T05:53:53+00:00

Let the DMA engine core do the device node validation instead of drivers. Signed-off-by: Baolin Wang Signed-off-by: Vinod Koul

dmaengine: sh: rcar-dmac: Let the core do the device node validation

2019-05-27T05:53:53+00:00

Let the DMA engine core do the device node validation instead of drivers. Signed-off-by: Baolin Wang Signed-off-by: Vinod Koul

dmaengine: sudmac: remove unused driver

2019-05-21T04:22:50+00:00

SUDMAC driver was introduced in v3.10 but was never integrated for use by any platform. As it is unused remove it. Signed-off-by: Simon Horman Acked-by: Yoshihiro Shimoda Signed-off-by: Vinod Koul

Merge tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2019-05-09T15:51:45+00:00

Pull dmaengine updates from Vinod Koul: - Updates to stm32 dma residue calculations - Interleave dma capability to axi-dmac and support for ZynqMP arch - Rework of channel assignment for rcar dma - Debugfs for pl330 driver - Support for Tegra186/Tegra194, refactoring for new chips and support for pause/resume - Updates to axi-dmac, bcm2835, fsl-edma, idma64, imx-sdma, rcar-dmac, stm32-dma etc - dev_get_drvdata() updates on few drivers * tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (34 commits) dmaengine: tegra210-adma: restore channel status dmaengine: tegra210-dma: free dma controller in remove() dmaengine: tegra210-adma: add pause/resume support dmaengine: tegra210-adma: add support for Tegra186/Tegra194 Documentation: DT: Add compatibility binding for Tegra186 dmaengine: tegra210-adma: prepare for supporting newer Tegra chips dmaengine: at_xdmac: remove a stray bottom half unlock dmaengine: fsl-edma: Adjust indentation dmaengine: fsl-edma: Fix typo in Vybrid name dmaengine: stm32-dma: fix residue calculation in stm32-dma dmaengine: nbpfaxi: Use dev_get_drvdata() dmaengine: bcm-sba-raid: Use dev_get_drvdata() dmaengine: stm32-dma: Fix unsigned variable compared with zero dmaengine: stm32-dma: use platform_get_irq() dmaengine: rcar-dmac: Update copyright information dmaengine: imx-sdma: Only check ratio on parts that support 1:1 dmaengine: xgene-dma: fix spelling mistake "descripto" -> "descriptor" dmaengine: idma64: Move driver name to the header dmaengine: bcm2835: Drop duplicate capability setting. dmaengine: pl330: _stop: clear interrupt status ...