kernel/linux.git/drivers/dma/sh, branch v4.17.1

Merge tag 'dmaengine-4.17-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2018-04-10T19:14:37+00:00

Pull dmaengine updates from Vinod Koul: "This time we have couple of new drivers along with updates to drivers: - new drivers for the DesignWare AXI DMAC and MediaTek High-Speed DMA controllers - stm32 dma and qcom bam dma driver updates - norandom test option for dmatest" * tag 'dmaengine-4.17-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (30 commits) dmaengine: stm32-dma: properly mask irq bits dmaengine: stm32-dma: fix max items per transfer dmaengine: stm32-dma: fix DMA IRQ status handling dmaengine: stm32-dma: Improve memory burst management dmaengine: stm32-dma: fix typo and reported checkpatch warnings dmaengine: stm32-dma: fix incomplete configuration in cyclic mode dmaengine: stm32-dma: threshold manages with bitfield feature dt-bindings: stm32-dma: introduce DMA features bitfield dt-bindings: rcar-dmac: Document r8a77470 support dmaengine: rcar-dmac: Fix too early/late system suspend/resume callbacks dmaengine: dw-axi-dmac: fix spelling mistake: "catched" -> "caught" dmaengine: edma: Check the memory allocation for the memcpy dma device dmaengine: at_xdmac: fix rare residue corruption dmaengine: mediatek: update MAINTAINERS entry with MediaTek DMA driver dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC dt-bindings: dmaengine: Add MediaTek High-Speed DMA controller bindings dt-bindings: Document the Synopsys DW AXI DMA bindings dmaengine: Introduce DW AXI DMAC driver dmaengine: pl330: fix a race condition in case of threaded irqs dmaengine: imx-sdma: fix pagefault when channel is disabled during interrupt ...

dmaengine: rcar-dmac: Fix too early/late system suspend/resume callbacks

2018-04-04T05:54:05+00:00

If serial console wake-up is enabled ("echo enabled > /sys/.../ttySC0/power/wakeup"), and any serial input is received while the system is suspended, serial port input no longer works after system resume. Note that: 1) The system can still be woken up using the serial console, 2) Serial port input keeps working if the system is woken up in some other way (e.g. Wake-on-LAN or gpio-keys), and no serial input was received while suspended. To fix this, replace SET_LATE_SYSTEM_SLEEP_PM_OPS() by SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(), as the callbacks installed by the former happen too early resp. late in the suspend resp. resume process. Reported-by: RVC test team via Yoshihiro Shimoda Fixes: 1131b0a4af911de5 ("dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit") Signed-off-by: Geert Uytterhoeven Signed-off-by: Vinod Koul

dmaengine: rcar-dmac: Check the done lists in rcar_dmac_chan_get_residue()

2018-03-05T11:29:35+00:00

This patch fixes an issue that a race condition happens between a client driver and the rcar-dmac driver: - The rcar_dmac_isr_transfer_end() is called. - The done list appears, and desc.running is the next active list. - rcar_dmac_chan_get_residue() is called by a client driver before rcar_dmac_isr_channel_thread() is called. - The rcar_dmac_chan_get_residue() will not find any descriptors. - And, the following WARNING happens: WARN(1, "No descriptor for cookie!"); The sh-sci driver with HSCIF (921,600bps) on R-Car H3 can cause this situation. So, this patch checks the done lists in rcar_dmac_chan_get_residue() and returns zero if the done lists has the argument cookie. Tested-by: Nguyen Viet Dung Signed-off-by: Yoshihiro Shimoda Signed-off-by: Vinod Koul

dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3

2018-02-27T15:04:38+00:00

According to R-Car Gen3 Rev.0.80 manual, the DMATCR can be set to 16,777,215 as maximum. So, this patch fixes the max_chunk_size for safety on all of SoCs. Otherwise, a system may hang if the DMATCR is set to 0 on R-Car Gen3. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Signed-off-by: Vinod Koul

Merge tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2018-01-31T19:52:20+00:00

Pull dmaengine updates from Vinod Koul: "This time is smallish update with updates mainly to drivers: - updates to xilinx and zynqmp dma controllers - update reside calculation for rcar controller - more RSTify fixes for documentation - add support for race free transfer termination and updating for users for that - support for new rev of hidma with addition new APIs to get device match data in ACPI/OF - random updates to bunch of other drivers" * tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (47 commits) dmaengine: dmatest: fix container_of member in dmatest_callback dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error check dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy' dmaengine: qcom_hidma: simplify DT resource parsing dmaengine: xilinx_dma: Free BD consistent memory dmaengine: xilinx_dma: Fix warning variable prev set but not used dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma dmaengine: doc: format struct fields using monospace dmaengine: doc: fix bullet list formatting dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63 dmaengine: cppi41: Fix channel queues array size check dmaengine: imx-sdma: Add MODULE_FIRMWARE dmaengine: xilinx_dma: Fix typos dmaengine: xilinx_dma: Differentiate probe based on the ip type dmaengine: xilinx_dma: fix style issues from checkpatch dmaengine: xilinx_dma: Fix kernel doc warnings dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdma dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor dmaengine: zynqmp_dma: Fix race condition in the probe ...

dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit

2018-01-17T11:46:18+00:00

The current (empty) system sleep callbacks rely on the PM core to force a runtime resume to reinitialize the DMAC registers during system resume. Without a reinitialization, e.g. SCIF DMA will hang silently after a system resume on R-Car Gen3. Make this explicit by using pm_runtime_force_{suspend,resume}() as the system sleep callbacks instead. Use SET_LATE_SYSTEM_SLEEP_PM_OPS() as DMA engines must be initialized before all DMA slave devices. Fixes: 17218e0092f8 "PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()" Suggested-by: Ulf Hansson Signed-off-by: Geert Uytterhoeven Reviewed-by: Ulf Hansson Acked-by: Vinod Koul Signed-off-by: Rafael J. Wysocki

dmaengine: rcar-dmac: use TCRB instead of TCR for residue

2017-11-29T14:12:57+00:00

SYS/RT/Audio DMAC includes independent data buffers for reading and writing. Therefore, the read transfer counter and write transfer counter have different values. TCR indicates read counter, and TCRB indicates write counter. The relationship is like below. TCR TCRB [SOURCE] -> [DMAC] -> [SINK] In the MEM_TO_DEV direction, what really matters is how much data has been written to the device. If the DMA is interrupted between read and write, then, the data doesn't end up in the destination, so shouldn't be counted. TCRB is thus the register we should use in this cases. In the DEV_TO_MEM direction, the situation is more complex. Both the read and write side are important. What matters from a data consumer point of view is how much data has been written to memory. On the other hand, if the transfer is interrupted between read and write, we'll end up losing data. It can also be important to report. In the MEM_TO_MEM direction, what matters is of course how much data has been written to memory from data consumer point of view. Here, because read and write have independent data buffers, it will take a while for TCR and TCRB to become equal. Thus we should check TCRB in this case, too. Thus, all cases we should check TCRB instead of TCR. Without this patch, Sound Capture has noise after PulseAudio support (= 07b7acb51d2 ("ASoC: rsnd: update pointer more accurate")), because the recorder will use wrong residue counter which indicates transferred from sound device, but in reality the data was not yet put to memory and recorder will record it. However, because DMAC is buffering data until it can be transferable size, TCRB might not be updated. For example, if consumer doesn't know how much data can be received, it requests enough size to DMAC. But in reality, it might receive very few data. In such case, DMAC just buffered it until transferable size, and no TCRB updated. In such case, this buffered data will be transferred if CHCR::DE bit was cleared, and this is happen if rcar_dmac_chan_halt(). In other word, it happen when consumer called dmaengine_terminate_all(). Because of this behavior, it need to flush buffered data when it returns "residue" (= dmaengine_tx_status()). Otherwise, consumer might calculate wrong things if it called dmaengine_tx_status() and dmaengine_terminate_all() consecutively. Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Tested-by: Ryo Kodama Tested-by: Geert Uytterhoeven Signed-off-by: Vinod Koul

dmaengine: rcar-dmac: ensure CHCR DE bit is actually 0 after clearing

2017-11-29T14:12:57+00:00

DMAC reads data from source device, and buffered it until transferable size for sink device. Because of this behavior, DMAC is including buffered data . Now, CHCR DE bit is controlling DMA transfer enable/disable. If DE bit was cleared during data transferring, or during buffering, it will flush buffered data if source device was peripheral device (The buffered data will be removed if source device was memory). Because of this behavior, driver should ensure that DE bit is actually 0 after clearing. This patch adds new rcar_dmac_chcr_de_barrier() and call it after CHCR register access. Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Tested-by: Ryo Kodama Tested-by: Geert Uytterhoeven Signed-off-by: Vinod Koul

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

dmaengine: rcar-dmac: initialize all data before registering IRQ handler

2017-08-25T06:57:07+00:00

Anton Volkov noticed that engine->dev is NULL before of_dma_controller_register() in probe. Thus there might be a NULL pointer dereference in rcar_dmac_chan_start_xfer while accessing chan->chan.device->dev which is equal to (&dmac->engine)->dev. On same reason, same and similar things will happen if we didn't initialize all necessary data before calling register irq function. To be more safety code, this patch initialize all necessary data before calling register irq function. Reported-by: Anton Volkov Signed-off-by: Kuninori Morimoto Signed-off-by: Vinod Koul