kernel/linux.git/drivers/dma/sh, branch v4.14.286

dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"

2022-04-20T07:08:30+00:00

commit d143f939a95696d38ff800ada14402fa50ebbd6c upstream. This reverts commit 455896c53d5b ("dmaengine: shdma: Fix runtime PM imbalance on error") as the patch wrongly reduced the count on error and did not bail out. So drop the count by reverting the patch . Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: shdma: Fix runtime PM imbalance on error

2022-03-08T18:01:55+00:00

[ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ] pm_runtime_get_() increments the runtime PM usage counter even when it returns an error code, thus a matching decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Yongzhi Liu Link: https://lore.kernel.org/r/1642311296-87020-1-git-send-email-lyz_cs@pku.edu.cn Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: sh: rcar-dmac: Check for error num after setting mask

2022-02-23T10:57:35+00:00

commit 2d21543efe332cd8c8f212fb7d365bc8b0690bfa upstream. Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. Fixes: dc312349e875 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits") Signed-off-by: Jiasheng Jiang Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()

2021-08-26T12:37:07+00:00

[ Upstream commit 1da569fa7ec8cb0591c74aa3050d4ea1397778b4 ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by moving the error_pm label above the pm_runtime_put() in the error path. Reported-by: Hulk Robot Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: rcar-dmac: set scatter/gather max segment size

2019-11-24T07:23:17+00:00

[ Upstream commit 97d49c59e219acac576e16293a6b8cb99302f62f ] Fix warning when running with CONFIG_DMA_API_DEBUG_SG=y by allocating a device_dma_parameters structure and filling in the max segment size. Signed-off-by: Wolfram Sang Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: rcar-dmac: Reject zero-length slave DMA requests

2019-08-06T17:05:21+00:00

[ Upstream commit 78efb76ab4dfb8f74f290ae743f34162cd627f19 ] While the .device_prep_slave_sg() callback rejects empty scatterlists, it still accepts single-entry scatterlists with a zero-length segment. These may happen if a driver calls dmaengine_prep_slave_single() with a zero len parameter. The corresponding DMA request will never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and DMA timeouts. Although requesting a zero-length DMA request is a driver bug, rejecting it early eases debugging. Note that the .device_prep_dma_memcpy() callback already rejects requests to copy zero bytes. Reported-by: Eugeniu Rosca Analyzed-by: Yoshihiro Shimoda Signed-off-by: Geert Uytterhoeven Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid

2019-05-02T07:40:30+00:00

commit 907bd68a2edc491849e2fdcfe52c4596627bca94 upstream. Having a cyclic DMA, a residue 0 is not an indication of a completed DMA. In case of cyclic DMA make sure that dma_set_residue() is called and with this a residue of 0 is forwarded correctly to the caller. Fixes: 3544d2878817 ("dmaengine: rcar-dmac: use result of updated get_residue in tx_status") Signed-off-by: Dirk Behme Signed-off-by: Achim Dahlhoff Signed-off-by: Hiroyuki Yokoyama Signed-off-by: Yao Lihua Reviewed-by: Yoshihiro Shimoda Reviewed-by: Laurent Pinchart Cc: # v4.8+ Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: rcar-dmac: Check the done lists in rcar_dmac_chan_get_residue()

2018-05-30T05:52:36+00:00

[ Upstream commit 3e081628d510b2ddbe493371d9c574d9275da17e ] This patch fixes an issue that a race condition happens between a client driver and the rcar-dmac driver: - The rcar_dmac_isr_transfer_end() is called. - The done list appears, and desc.running is the next active list. - rcar_dmac_chan_get_residue() is called by a client driver before rcar_dmac_isr_channel_thread() is called. - The rcar_dmac_chan_get_residue() will not find any descriptors. - And, the following WARNING happens: WARN(1, "No descriptor for cookie!"); The sh-sci driver with HSCIF (921,600bps) on R-Car H3 can cause this situation. So, this patch checks the done lists in rcar_dmac_chan_get_residue() and returns zero if the done lists has the argument cookie. Tested-by: Nguyen Viet Dung Signed-off-by: Yoshihiro Shimoda Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3

2018-05-30T05:52:05+00:00

[ Upstream commit d716d9b702bb759dd6fb50804f10a174bd156d71 ] According to R-Car Gen3 Rev.0.80 manual, the DMATCR can be set to 16,777,215 as maximum. So, this patch fixes the max_chunk_size for safety on all of SoCs. Otherwise, a system may hang if the DMATCR is set to 0 on R-Car Gen3. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman