kernel/linux.git/drivers/dma/qcom, branch v4.14.85

dmaengine: qcom: bam_dma: get num-channels and num-ees from dt

2018-05-30T05:52:37+00:00

[ Upstream commit 48d163b1aa6e7f650c0b7a4f9c61c387a6def868 ] When Linux is master of BAM, it can directly read registers to know number of supported channels, however when its remotely controlled reading these registers would trigger a crash if the BAM is not yet initialized or powered up on the remote side. This patch allows driver to read num-channels and num-ees from Device Tree for remotely controlled BAM. Signed-off-by: Srinivas Kandagatla Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

dmaengine: qcom_hidma: check pending interrupts

2018-03-19T07:42:56+00:00

[ Upstream commit 38680bc6b1e3592bc9e18adc1d6e259667df27ce ] Driver is missing the interrupts if two requests are queued up at the same time as the interrupt handler is servicing a request that was just delivered. The ISR clears the interrupt at the end but it could be clearing the interrupt for an outstanding event. Therefore, second interrupt never arrives. Clear the interrupt first and then check for completions. Also, make sure that request start and interrupt clear do not overlap in time by using a spinlock. Signed-off-by: Sinan Kaya Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

dmaengine: qcom: bam_dma: add command descriptor flag

2017-08-28T11:10:18+00:00

If DMA_PREP_CMD flag is passed in prep_slave_sg then peripheral driver has passed the data is in BAM command descriptor format and BAM driver should set CMD bit for each of the HW descriptors. Signed-off-by: Abhishek Sahu Signed-off-by: Vinod Koul

dmaengine: qcom_hidma: avoid freeing an uninitialized pointer

2017-08-21T16:21:00+00:00

If device_node np doesn't contain child or first child doesn't have property "reg" then hidma_mgmt_of_populate_channels() perfoms deallocation on uninitialized local variable res. The patch adds res initialization by NULL. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev Reviewed-by: Sinan Kaya Signed-off-by: Vinod Koul

dmaengine: qcom_hidma: correct channel QOS register offset

2017-07-19T04:08:55+00:00

A regression was found while testing QOS with different channels. The QOS register offset is 0x700 rather than 0x300. Signed-off-by: Sinan Kaya Signed-off-by: Vinod Koul

dmaengine: qcom_hidma: correct overriding message

2017-07-19T04:08:55+00:00

A false overriding information is being presented during boot under this scenario. 1. First object checks for kernel command line value against zero. 2. It doesn't find it, it sets the command line variable to the value coming from ACPI/DT. 3. Second object is being probed. 4. Second object sees that the value of kernel command line override is non-zero, it prints an overriding message even though value matches ACPI/DT value. hidma-mgmt QCOM8060:03: overriding max-write-burst-bytes: 1024 Add an additional check to verify that kernel command line value is different from the ACPI/DT value. Signed-off-by: Sinan Kaya Signed-off-by: Vinod Koul

dmaengine: qcom_hidma: introduce memset support

2017-07-19T04:03:21+00:00

HIDMA HW supports memset operation in addition to memcpy. Since the memset API is present on the kernel now, bring the memset feature into life. The descriptor format is the same for both memcpy and memset. Type of the descriptor is 4 when memset is requested. The lowest 8 bits of the source DMA argument is used as a fill pattern. Signed-off-by: Sinan Kaya Signed-off-by: Vinod Koul

dmaengine: qcom_hidma: correct API violation for submit

2017-07-03T05:09:51+00:00

Current code is violating the DMA Engine API by putting the submitted requests directly into the HW queue. This causes queued transactions to be started by another thread as soon as the first one finishes. The DMA Engine document clearly states this. "dmaengine_submit() will not start the DMA operation". Move HW queuing of the requests into the issue_pending() routine to comply with API requirements also create a new queued state for temporarily holding the requests. A descriptor goes through these transitions now. free->prepared->queued->active->completed->free as opposed to free->prepared->active->completed->free Signed-off-by: Sinan Kaya Signed-off-by: Vinod Koul

dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden

2017-06-26T02:57:39+00:00

Parameters like maximum read/write request size and the maximum number of active transactions are currently configured in DT/ACPI. This patch allows a user to override these to fine tune performance for their application. Signed-off-by: Sinan Kaya Signed-off-by: Vinod Koul