kernel/linux.git/drivers/dma/dw, branch v4.11.5

Merge tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2017-02-22T01:06:22+00:00

Pull dmaengine updates from Vinod Koul: "This time we fairly boring and bit small update. - Support for Intel iDMA 32-bit hardware - deprecate broken support for channel switching in async_tx - bunch of updates on stm32-dma - Cyclic support for zx dma and making in generic zx dma driver - Small updates to bunch of other drivers" * tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) async_tx: deprecate broken support for channel switching dmaengine: rcar-dmac: Widen DMA mask to 40 bits dmaengine: sun6i: allow build on ARM64 platforms (sun50i) dmaengine: Provide a wrapper for memcpy operations dmaengine: zx: fix build warning dmaengine: dw: we do support Merrifield SoC in PCI mode dmaengine: dw: add support of iDMA 32-bit hardware dmaengine: dw: introduce register mappings for iDMA 32-bit dmaengine: dw: introduce block2bytes() and bytes2block() dmaengine: dw: extract dwc_chan_pause() for future use dmaengine: dw: replace convert_burst() with one liner dmaengine: dw: register IRQ and DMA pool with instance ID dmaengine: dw: Fix data corruption in large device to memory transfers dmaengine: ste_dma40: indicate granularity on channels dmaengine: ste_dma40: indicate directions on channels dmaengine: stm32-dma: Add error messages if xlate fails dmaengine: dw: pci: remove LPE Audio DMA ID dmaengine: stm32-dma: Add max_burst support dmaengine: stm32-dma: Add synchronization support dmaengine: stm32-dma: Fix residue computation issue in cyclic mode ...

dmaengine: dw: we do support Merrifield SoC in PCI mode

2017-01-25T06:21:40+00:00

Intel Merrifield platform contains Intel integrated DMA (iDMA 32-bit) which has a slightly different register mapping, e.g. some bits in CTL_* and CFG_* channel registers, and has to use platform data since there is no autoconfiguration. The iDMA 32-bit specification is available in the publicly available documentation for Intel Braswell and BayTrail SoCs as LPE Audio DMA. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: add support of iDMA 32-bit hardware

2017-01-25T06:21:40+00:00

iDMA 32-bit is Intel designed DMA controller that behaves like Synopsys Designware DMA. This patch adds a support of the new Intel hardware. Due to iDMA 32-bit has no autoconfiguration the platform code must provide a platform data to dw_dma_probe(). By default full FIFO (1024 bytes) is assigned to channel 0. Here we slice FIFO on equal parts between channels for iDMA 32-bit case. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: introduce register mappings for iDMA 32-bit

2017-01-25T06:21:40+00:00

The integrated DMA (iDMA 32-bit) is Intel designed DMA controller which mimics Synopsys Designware DMA. This patch appends the register mappings for the parts which are slightly different to the DesignWare hardware. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: introduce block2bytes() and bytes2block()

2017-01-25T06:21:40+00:00

The newly introduced helpers prepare driver to support new DMA controller hardware. While here, introduce DWC_CTLH_BLOCK_TS() macro as well. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: extract dwc_chan_pause() for future use

2017-01-25T06:21:39+00:00

iDMA 32-bit has a special handling of the FIFO during pause() / terminate_all(). Prepare code to implement that. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: replace convert_burst() with one liner

2017-01-25T06:21:39+00:00

Replace convert_burst() with one liner in place. The change simplifies further extension of the driver to cover new DMA controller hardware. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: register IRQ and DMA pool with instance ID

2017-01-25T06:21:39+00:00

It is really useful not only for debugging to have an IRQ line and DMA pool labeled with driver and its instance ID. Do this for DesignWare DMA driver. All current users of this IP would be enhanced later on. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: Fix data corruption in large device to memory transfers

2017-01-25T06:21:39+00:00

When transferring more data than the maximum block size supported by the HW multiplied by source width the transfer is split into smaller chunks. Currently code calculates the memory width and thus aligment before splitting for both memory to device and device to memory transfers. For memory to device transfers this work fine since alignment is preserved through the splitting and split blocks are still memory width aligned. However in device to memory transfers aligment breaks when maximum block size multiplied by register width doesn't have the same alignment than the buffer. For instance when transferring from an 8-bit register 4100 bytes (32-bit aligned) on a DW DMA that has maximum block size of 4095 elements. An attempt to do such transfers caused data corruption. Fix this by calculating and setting the destination memory width after splitting by using the split block aligment and length. Signed-off-by: Jarkko Nikula Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: pci: remove LPE Audio DMA ID

2017-01-10T05:07:34+00:00

LPE Audio driver should take care of DMA IPs by itself. Keeping an ID like this in dw_dma_pci.c is anyway wrong since that block has two DMA controllers under one ID (like MFD device). That's also why I didn't include LPE Audio ID for Intel Merrifield previously. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul