kernel/linux.git/drivers/dma/dmaengine.c, branch linux-2.6.35.y

Merge branch 'ioat' into dmaengine

2010-05-17T23:30:58+00:00

async_tx: trim dma_async_tx_descriptor in 'no channel switch' case

2010-05-17T23:24:16+00:00

Saves 24 bytes per descriptor (64-bit) when the channel-switching capabilities of async_tx are not required. Signed-off-by: Dan Williams

DMA ENGINE: Do not reset 'private' of channel

2010-05-17T08:33:56+00:00

The member 'private' of 'struct dma_chan' is meant for passing data between client and the controller driver. The DMA client driver may point it to platform specific stuff after acquiring the channel. So, it is the responsiblity of the same code to reset it, if it must. The DMA engine doesn't set it and hence, shouldn't reset it either. This reseting of private by DMA Engine comes in the way of implementing default channel settings during DMAC probe. That capability is useful for not having the clients to always provide platform specific data, like Rx/Tx FIFO addresses, which usually doesn't change across channel requests. Signed-off-by: Jassi Brar Signed-off-by: Dan Williams

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

DMAENGINE: generic channel status v2

2010-03-26T23:50:49+00:00

Convert the device_is_tx_complete() operation on the DMA engine to a generic device_tx_status()operation which can return three states, DMA_TX_RUNNING, DMA_TX_COMPLETE, DMA_TX_PAUSED. [dan.j.williams@intel.com: update for timberdale] Signed-off-by: Linus Walleij Acked-by: Mark Brown Cc: Maciej Sosnowski Cc: Nicolas Ferre Cc: Pavel Machek Cc: Li Yang Cc: Guennadi Liakhovetski Cc: Paul Mundt Cc: Ralf Baechle Cc: Haavard Skinnemoen Cc: Magnus Damm Cc: Liam Girdwood Cc: Joe Perches Cc: Roland Dreier Signed-off-by: Dan Williams

DMAENGINE: generic slave control v2

2010-03-26T23:44:01+00:00

Convert the device_terminate_all() operation on the DMA engine to a generic device_control() operation which can now optionally support also pausing and resuming DMA on a certain channel. Implemented for the COH 901 318 DMAC as an example. [dan.j.williams@intel.com: update for timberdale] Signed-off-by: Linus Walleij Acked-by: Mark Brown Cc: Maciej Sosnowski Cc: Nicolas Ferre Cc: Pavel Machek Cc: Li Yang Cc: Guennadi Liakhovetski Cc: Paul Mundt Cc: Ralf Baechle Cc: Haavard Skinnemoen Cc: Magnus Damm Cc: Liam Girdwood Cc: Joe Perches Cc: Roland Dreier Signed-off-by: Dan Williams

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

2010-03-03T15:34:18+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: add __percpu sparse annotations to what's left percpu: add __percpu sparse annotations to fs percpu: add __percpu sparse annotations to core kernel subsystems local_t: Remove leftover local.h this_cpu: Remove pageset_notifier this_cpu: Page allocator conversion percpu, x86: Generic inc / dec percpu instructions local_t: Move local.h include to ringbuffer.c and ring_buffer_benchmark.c module: Use this_cpu_xx to dynamically allocate counters local_t: Remove cpu_local_xx macros percpu: refactor the code in pcpu_[de]populate_chunk() percpu: remove compile warnings caused by __verify_pcpu_ptr() percpu: make accessors check for percpu pointer in sparse percpu: add __percpu for sparse. percpu: make access macros universal percpu: remove per_cpu__ prefix.

percpu: add __percpu sparse annotations to what's left

2010-02-17T02:17:38+00:00

Add __percpu sparse annotations to places which didn't make it in one of the previous patches. All converions are trivial. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. Signed-off-by: Tejun Heo Acked-by: Borislav Petkov Cc: Dan Williams Cc: Huang Ying Cc: Len Brown Cc: Neil Brown

dmaengine: fix memleak in dma_async_device_unregister

2010-02-02T21:58:37+00:00

While debugging a dma driver I noticed a memleak after unloading the driver module. Caught by kmemleak. Signed-off-by: Anatolij Gustschin Cc: Maciej Sosnowski Signed-off-by: Dan Williams

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

2009-12-14T17:58:24+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c