kernel/linux.git/drivers/crypto/caam/ctrl.c, branch v4.14.263

crypto: caam - Fix null dereference at error path

2018-04-08T12:26:31+00:00

commit b85149f6f5d5a9279f29a73b2e95342f4d465e73 upstream. caam_remove already removes the debugfs entry, so we need to remove the one immediately before calling caam_remove. This fix a NULL dereference at error paths is caam_probe fail. Fixes: 67c2315def06 ("crypto: caam - add Queue Interface (QI) backend support") Tested-by: Ryan Harkin Cc: "Horia Geantă" Cc: Aymen Sghaier Cc: Fabio Estevam Cc: Peng Fan Cc: "David S. Miller" Cc: Lukas Auer Cc: # 4.12+ Reviewed-by: Horia Geantă Signed-off-by: Rui Miguel Silva Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: caam - fix endless loop when DECO acquire fails

2018-02-16T19:23:02+00:00

commit 225ece3e7dad4cfc44cca38ce7a3a80f255ea8f1 upstream. In case DECO0 cannot be acquired - i.e. run_descriptor_deco0() fails with -ENODEV, caam_probe() enters an endless loop: run_descriptor_deco0 ret -ENODEV -> instantiate_rng -ENODEV, overwritten by -EAGAIN ret -EAGAIN -> caam_probe -EAGAIN results in endless loop It turns out the error path in instantiate_rng() is incorrect, the checks are done in the wrong order. Fixes: 1005bccd7a4a6 ("crypto: caam - enable instantiation of all RNG4 state handles") Reported-by: Bryan O'Donoghue Suggested-by: Auer Lukas Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: caam - fix LS1021A support on ARMv7 multiplatform kernel

2017-09-20T09:42:42+00:00

When built using multi_v7_defconfig, driver does not work on LS1021A: [...] caam 1700000.crypto: can't identify CAAM ipg clk: -2 caam: probe of 1700000.crypto failed with error -2 [...] It turns out we have to detect at runtime whether driver is running on an i.MX platform or not. Cc: Fixes: 6c3af9559352 ("crypto: caam - add support for LS1021A") Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: caam - Remove unused dentry members

2017-08-09T12:18:29+00:00

Most of the dentry members from structure caam_drv_private are never used at all, so it is safe to remove them. Since debugfs_remove_recursive() is called, we don't need the file entries. Signed-off-by: Fabio Estevam Acked-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: caam/jr - add support for DPAA2 parts

2017-08-03T05:47:13+00:00

Add support for using the caam/jr backend on DPAA2-based SoCs. These have some particularities we have to account for: -HW S/G format is different -Management Complex (MC) firmware initializes / manages (partially) the CAAM block: MCFGR, QI enablement in QICTL, RNG Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: caam - remove unused variables in caam_drv_private

2017-07-18T10:16:06+00:00

Signed-off-by: Tudor Ambarus Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2017-04-05T13:57:07+00:00

Merge the crypto tree to resolve conflict between caam changes.

crypto: caam - fix RNG deinstantiation error checking

2017-04-05T13:20:17+00:00

RNG instantiation was previously fixed by commit 62743a4145bb9 ("crypto: caam - fix RNG init descriptor ret. code checking") while deinstantiation was not addressed. Since the descriptors used are similar, in the sense that they both end with a JUMP HALT command, checking for errors should be similar too, i.e. status code 7000_0000h should be considered successful. Cc: # 3.13+ Fixes: 1005bccd7a4a6 ("crypto: caam - enable instantiation of all RNG4 state handles") Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: caam - fix JR platform device subsequent (re)creations

2017-04-05T13:20:15+00:00

The way Job Ring platform devices are created and released does not allow for multiple create-release cycles. JR0 Platform device creation error JR0 Platform device creation error caam 2100000.caam: no queues configured, terminating caam: probe of 2100000.caam failed with error -12 The reason is that platform devices are created for each job ring: for_each_available_child_of_node(nprop, np) if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") || of_device_is_compatible(np, "fsl,sec4.0-job-ring")) { ctrlpriv->jrpdev[ring] = of_platform_device_create(np, NULL, dev); which sets OF_POPULATED on the device node, but then it cleans these up: /* Remove platform devices for JobRs */ for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) { if (ctrlpriv->jrpdev[ring]) of_device_unregister(ctrlpriv->jrpdev[ring]); } which leaves OF_POPULATED set. Use of_platform_populate / of_platform_depopulate instead. This allows for a bit of driver clean-up, jrpdev is no longer needed. Logic changes a bit too: -exit in case of_platform_populate fails, since currently even QI backend depends on JR; true, we no longer support the case when "some" of the JR DT nodes are incorrect -when cleaning up, caam_remove() would also depopulate RTIC in case it would have been populated somewhere else - not the case for now Cc: Fixes: 313ea293e9c4d ("crypto: caam - Add Platform driver for Job Ring") Reported-by: Russell King Suggested-by: Rob Herring Signed-off-by: Horia Geantă Acked-by: Rob Herring Signed-off-by: Herbert Xu

crypto: caam - add Queue Interface (QI) backend support

2017-03-24T14:02:59+00:00

CAAM engine supports two interfaces for crypto job submission: -job ring interface - already existing caam/jr driver -Queue Interface (QI) - caam/qi driver added in current patch QI is present in CAAM engines found on DPAA platforms. QI gets its I/O (frame descriptors) from QMan (Queue Manager) queues. This patch adds a platform device for accessing CAAM's queue interface. The requests are submitted to CAAM using one frame queue per cryptographic context. Each crypto context has one shared descriptor. This shared descriptor is attached to frame queue associated with corresponding driver context using context_a. The driver hides the mechanics of FQ creation, initialisation from its applications. Each cryptographic context needs to be associated with driver context which houses the FQ to be used to transport the job to CAAM. The driver provides API for: (a) Context creation (b) Job submission (c) Context deletion (d) Congestion indication - whether path to/from CAAM is congested The driver supports affining its context to a particular CPU. This means that any responses from CAAM for the context in question would arrive at the given CPU. This helps in implementing one CPU per packet round trip in IPsec application. The driver processes CAAM responses under NAPI contexts. NAPI contexts are instantiated only on cores with affined portals since only cores having their own portal can receive responses from DQRR. The responses from CAAM for all cryptographic contexts ride on a fixed set of FQs. We use one response FQ per portal owning core. The response FQ is configured in each core's and thus portal's dedicated channel. This gives the flexibility to direct CAAM's responses for a crypto context on a given core. Signed-off-by: Vakul Garg Signed-off-by: Alex Porosanu Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu