kernel/linux.git/drivers/cpuidle/Makefile, branch v6.18.21

tracing: Disable branch profiling in noinstr code

2025-03-22T08:49:26+00:00

CONFIG_TRACE_BRANCH_PROFILING inserts a call to ftrace_likely_update() for each use of likely() or unlikely(). That breaks noinstr rules if the affected function is annotated as noinstr. Disable branch profiling for files with noinstr functions. In addition to some individual files, this also includes the entire arch/x86 subtree, as well as the kernel/entry, drivers/cpuidle, and drivers/idle directories, all of which are noinstr-heavy. Due to the nature of how sched binaries are built by combining multiple .c files into one, branch profiling is disabled more broadly across the sched code than would otherwise be needed. This fixes many warnings like the following: vmlinux.o: warning: objtool: do_syscall_64+0x40: call to ftrace_likely_update() leaves .noinstr.text section vmlinux.o: warning: objtool: __rdgsbase_inactive+0x33: call to ftrace_likely_update() leaves .noinstr.text section vmlinux.o: warning: objtool: handle_bug.isra.0+0x198: call to ftrace_likely_update() leaves .noinstr.text section ... Reported-by: Ingo Molnar Suggested-by: Steven Rostedt Signed-off-by: Josh Poimboeuf Signed-off-by: Ingo Molnar Acked-by: Thomas Gleixner Cc: Linus Torvalds Link: https://lore.kernel.org/r/fb94fc9303d48a5ed370498f54500cc4c338eb6d.1742586676.git.jpoimboe@kernel.org

cpuidle: Add RISC-V SBI CPU idle driver

2022-03-10T17:29:51+00:00

The RISC-V SBI HSM extension provides HSM suspend call which can be used by Linux RISC-V to enter platform specific low-power state. This patch adds a CPU idle driver based on RISC-V SBI calls which will populate idle states from device tree and use SBI calls to entry these idle states. Signed-off-by: Anup Patel Signed-off-by: Anup Patel Acked-by: Atish Patra Signed-off-by: Palmer Dabbelt

cpuidle: Factor-out power domain related code from PSCI domain driver

2022-03-10T17:29:44+00:00

The generic power domain related code in PSCI domain driver is largely independent of PSCI and can be shared with RISC-V SBI domain driver hence we factor-out this code into dt_idle_genpd.c and dt_idle_genpd.h. Signed-off-by: Anup Patel Signed-off-by: Anup Patel Reviewed-by: Ulf Hansson Signed-off-by: Palmer Dabbelt

cpuidle: psci: Split into two separate build objects

2020-07-29T16:38:30+00:00

The combined build object for the PSCI cpuidle driver and the PSCI PM domain, is a bit messy. Therefore let's split it up by adding a new Kconfig ARM_PSCI_CPUIDLE_DOMAIN and convert into two separate objects. Reviewed-by: Lina Iyer Reviewed-by: Sudeep Holla Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver

2020-05-26T08:46:01+00:00

The Qualcomm SPM cpuidle driver seems to be the last driver still using the generic ARM CPUidle infrastructure. Converting it actually allows us to simplify the driver, and we end up being able to remove more lines than adding new ones: - We can parse the CPUidle states in the device tree directly with dt_idle_states (and don't need to duplicate that functionality into the spm driver). - Each "saw" device managed by the SPM driver now directly registers its own cpuidle driver, removing the need for any global (per cpu) state. The device tree binding is the same, so the driver stays compatible with all old device trees. Signed-off-by: Stephan Gerhold Reviewed-by: Lina Iyer Reviewed-by: Ulf Hansson Acked-by: Bjorn Andersson Signed-off-by: Rafael J. Wysocki

cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle

2020-03-13T10:31:58+00:00

The driver's code is refactored in a way that will make it easy to support Tegra30/114/124 SoCs by this unified driver later on. The current functionality is equal to the old Tegra20 driver, only the code's structure changed a tad. This is also a proper platform driver now. Acked-by: Peter De Schrijver Signed-off-by: Dmitry Osipenko Acked-by: Daniel Lezcano Signed-off-by: Thierry Reding

cpuidle: psci: Add a helper to attach a CPU to its PM domain

2020-01-02T15:50:24+00:00

Introduce a PSCI DT helper function, psci_dt_attach_cpu(), which takes a CPU number as an in-parameter and tries to attach the CPU's struct device to its corresponding PM domain. Let's makes use of dev_pm_domain_attach_by_name(), as it allows us to specify "psci" as the "name" of the PM domain to attach to. Additionally, let's also prepare the attached device to be power managed via runtime PM. Note that, the implementation of the new helper function is in a new separate c-file, which may seems a bit too much at this point. However, subsequent changes that implements the remaining part of the PM domain support for cpuidle-psci, helps to justify this split. Signed-off-by: Ulf Hansson Reviewed-by: Sudeep Holla Acked-by: Rafael J. Wysocki

Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2019-09-18T02:15:14+00:00

Pull power management updates from Rafael Wysocki: "These include a rework of the main suspend-to-idle code flow (related to the handling of spurious wakeups), a switch over of several users of cpufreq notifiers to QoS-based limits, a new devfreq driver for Tegra20, a new cpuidle driver and governor for virtualized guests, an extension of the wakeup sources framework to expose wakeup sources as device objects in sysfs, and more. Specifics: - Rework the main suspend-to-idle control flow to avoid repeating "noirq" device resume and suspend operations in case of spurious wakeups from the ACPI EC and decouple the ACPI EC wakeups support from the LPS0 _DSM support (Rafael Wysocki). - Extend the wakeup sources framework to expose wakeup sources as device objects in sysfs (Tri Vo, Stephen Boyd). - Expose system suspend statistics in sysfs (Kalesh Singh). - Introduce a new haltpoll cpuidle driver and a new matching governor for virtualized guests wanting to do guest-side polling in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell). - Fix the menu and teo cpuidle governors to allow the scheduler tick to be stopped if PM QoS is used to limit the CPU idle state exit latency in some cases (Rafael Wysocki). - Increase the resolution of the play_idle() argument to microseconds for more fine-grained injection of CPU idle cycles (Daniel Lezcano). - Switch over some users of cpuidle notifiers to the new QoS-based frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events (Viresh Kumar). - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li). - Add support for MT8183 and MT8516 to the mediatek cpufreq driver (Andrew-sh.Cheng, Fabien Parent). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang). - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz). - Update the qcom cpufreq driver (among other things, to make it easier to extend and to use kryo cpufreq for other nvmem-based SoCs) and add qcs404 support to it (Niklas Cassel, Douglas RAILLARD, Sibi Sankar, Sricharan R). - Fix assorted issues and make assorted minor improvements in the cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli, Gustavo Silva, Hariprasad Kelam). - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd Bergmann). - Add new Exynos PPMU events to devfreq events and extend that mechanism (Lukasz Luba). - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny). - Improve devfreq documentation and governor code, fix spelling typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez, MyungJoo Ham, Gaël PORTAY). - Add regulators enable and disable to the OPP (operating performance points) framework (Kamil Konieczny). - Update the OPP framework to support multiple opp-suspend properties (Anson Huang). - Fix assorted issues and make assorted minor improvements in the OPP code (Niklas Cassel, Viresh Kumar, Yue Hu). - Clean up the generic power domains (genpd) framework (Ulf Hansson). - Clean up assorted pieces of power management code and documentation (Akinobu Mita, Amit Kucheria, Chuhong Yuan). - Update the pm-graph tool to version 5.5 including multiple fixes and improvements (Todd Brandt). - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven, Sébastien Szymanski)" * tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits) cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() PM: runtime: Documentation: add runtime_status ABI document pm-graph: make setVal unbuffered again for python2 and python3 powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() ...

ARM: psci: cpuidle: Introduce PSCI CPUidle driver

2019-08-09T16:51:39+00:00

PSCI firmware is the standard power management control for all ARM64 based platforms and it is also deployed on some ARM 32 bit platforms to date. Idle state entry in PSCI is currently achieved by calling arm_cpuidle_init() and arm_cpuidle_suspend() in a generic idle driver, which in turn relies on ARM/ARM64 CPUidle back-end to relay the call into PSCI firmware if PSCI is the boot method. Given that PSCI is the standard idle entry method on ARM64 systems (which means that no other CPUidle driver are expected on ARM64 platforms - so PSCI is already a generic idle driver), in order to simplify idle entry and code maintenance, it makes sense to have a PSCI specific idle driver so that idle code that it is currently living in drivers/firmware directory can be hoisted out of it and moved where it belongs, into a full-fledged PSCI driver, leaving PSCI code in drivers/firmware as a pure firmware interface, as it should be. Implement a PSCI CPUidle driver. By default it is a silent Kconfig entry which is left unselected, since it selection would clash with the generic ARM CPUidle driver that provides a PSCI based idle driver through the arm/arm64 arches back-ends CPU operations. Signed-off-by: Lorenzo Pieralisi Acked-by: Daniel Lezcano Reviewed-by: Ulf Hansson Reviewed-by: Sudeep Holla Cc: Ulf Hansson Cc: Sudeep Holla Cc: Daniel Lezcano Cc: Mark Rutland Cc: "Rafael J. Wysocki" Signed-off-by: Will Deacon

add cpuidle-haltpoll driver

2019-07-30T15:27:37+00:00

Add a cpuidle driver that calls the architecture default_idle routine. To be used in conjunction with the haltpoll governor. Signed-off-by: Marcelo Tosatti Signed-off-by: Rafael J. Wysocki