kernel/linux.git/drivers/cpufreq, branch v6.12.81

cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path

2026-04-11T12:24:49+00:00

commit 6dcf9d0064ce2f3e3dfe5755f98b93abe6a98e1e upstream. When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls kobject_put(&dbs_data->attr_set.kobj). The kobject release callback cpufreq_dbs_data_release() calls gov->exit(dbs_data) and kfree(dbs_data), but the current error path then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a double free. Keep the direct kfree(dbs_data) for the gov->init() failure path, but after kobject_init_and_add() has been called, let kobject_put() handle the cleanup through cpufreq_dbs_data_release(). Fixes: 4ebe36c94aed ("cpufreq: Fix kobject memleak") Signed-off-by: Guangshuo Li Reviewed-by: Zhongqiu Han Acked-by: Viresh Kumar Cc: All applicable Link: https://patch.msgid.link/20260401024535.1395801-1-lgs201920130244@gmail.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

cpufreq: conservative: Reset requested_freq on limits change

2026-04-02T11:09:42+00:00

commit 6a28fb8cb28b9eb39a392e531d938a889eacafc5 upstream. A recently reported issue highlighted that the cached requested_freq is not guaranteed to stay in sync with policy->cur. If the platform changes the actual CPU frequency after the governor sets one (e.g. due to platform-specific frequency scaling) and a re-sync occurs later, policy->cur may diverge from requested_freq. This can lead to incorrect behavior in the conservative governor. For example, the governor may assume the CPU is already running at the maximum frequency and skip further increases even though there is still headroom. Avoid this by resetting the cached requested_freq to policy->cur on detecting a change in policy limits. Reported-by: Lifeng Zheng Tested-by: Lifeng Zheng Link: https://lore.kernel.org/all/20260210115458.3493646-1-zhenglifeng1@huawei.com/ Signed-off-by: Viresh Kumar Reviewed-by: Zhongqiu Han Cc: All applicable Link: https://patch.msgid.link/d846a141a98ac0482f20560fcd7525c0f0ec2f30.1773999467.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

cpufreq: dt-platdev: Block the driver from probing on more QC platforms

2026-03-04T12:20:55+00:00

[ Upstream commit 7b781899072c5701ef9538c365757ee9ab9c00bd ] Add a number of QC platforms to the blocklist, they all use either the qcom-cpufreq-hw driver. Signed-off-by: Konrad Dybcio Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin

cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible

2026-03-04T12:19:31+00:00

[ Upstream commit 1fedbb589448bee9f20bb2ed9c850d1d2cf9963c ] According to the description in the intel_pstate.rst documentation, Capacity-Aware Scheduling and Energy-Aware Scheduling are only supported on a hybrid processor without SMT. Previously, the system used sched_smt_active() for judgment, which is not a strict condition because users can switch it on or off via /sys at any time. This could lead to incorrect driver settings in certain scenarios. For example, on a CPU that supports SMT, a user can disable SMT via the nosmt parameter to enable asym capacity, and then re-enable SMT via /sys. In such cases, some settings in the driver would no longer be correct. To address this issue, replace sched_smt_active() with cpu_smt_possible(), and only enable asym capacity when CPU SMT is not possible. Fixes: 929ebc93ccaa ("cpufreq: intel_pstate: Set asymmetric CPU capacity on hybrid systems") Signed-off-by: Yaxiong Tian [ rjw: Subject and changelog edits ] Link: https://patch.msgid.link/20260203024852.301066-1-tianyaxiong@kylinos.cn Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()

2026-03-04T12:19:29+00:00

[ Upstream commit 0b7fbf9333fa4699a53145bad8ce74ea986caa13 ] When calling of_parse_phandle_with_args(), the caller is responsible to call of_node_put() to release the reference of device node. In scmi_cpu_domain_id(), it does not release the reference. Fixes: e336baa4193e ("cpufreq: scmi: Prepare to move OF parsing of domain-id to cpufreq") Signed-off-by: Felix Gu Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin

cpufreq: intel_pstate: Check IDA only before MSR_IA32_PERF_CTL writes

2026-01-11T14:25:21+00:00

[ Upstream commit 4b747cc628d8f500d56cf1338280eacc66362ff3 ] Commit ac4e04d9e378 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode") introduced a check for feature X86_FEATURE_IDA to verify turbo mode support. Although this is the correct way to check for turbo mode support, it causes issues on some platforms that disable turbo during OS boot, but enable it later [1]. Before adding this feature check, users were able to get turbo mode frequencies by writing 0 to /sys/devices/system/cpu/intel_pstate/no_turbo post-boot. To restore the old behavior on the affected systems while still addressing the unchecked MSR issue on some Skylake-X systems, check X86_FEATURE_IDA only immediately before updates of MSR_IA32_PERF_CTL that may involve setting the Turbo Engage Bit (bit 32). Fixes: ac4e04d9e378 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode") Reported-by: Aaron Rainbolt Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2122531 [1] Tested-by: Aaron Rainbolt Signed-off-by: Srinivas Pandruvada [ rjw: Subject adjustment, changelog edits ] Link: https://patch.msgid.link/20251111010840.141490-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Rafael J. Wysocki [ richa: Backport to 6.12.y with context adjustments ] Signed-off-by: Richa Bharti Signed-off-by: Greg Kroah-Hartman

cpufreq: nforce2: fix reference count leak in nforce2

2026-01-08T09:14:19+00:00

commit 9600156bb99852c216a2128cdf9f114eb67c350f upstream. There are two reference count leaks in this driver: 1. In nforce2_fsb_read(): pci_get_subsys() increases the reference count of the PCI device, but pci_dev_put() is never called to release it, thus leaking the reference. 2. In nforce2_detect_chipset(): pci_get_subsys() gets a reference to the nforce2_dev which is stored in a global variable, but the reference is never released when the module is unloaded. Fix both by: - Adding pci_dev_put(nforce2_sub5) in nforce2_fsb_read() after reading the configuration. - Adding pci_dev_put(nforce2_dev) in nforce2_exit() to release the global device reference. Found via static analysis. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman

cpufreq: s5pv210: fix refcount leak

2026-01-08T09:13:56+00:00

[ Upstream commit 2de5cb96060a1664880d65b120e59485a73588a8 ] In function `s5pv210_cpu_init`, a possible refcount inconsistency has been identified, causing a resource leak. Why it is a bug: 1. For every clk_get, there should be a matching clk_put on every successive error handling path. 2. After calling `clk_get(dmc1_clk)`, variable `dmc1_clk` will not be freed even if any error happens. How it is fixed: For every failed path, an extra goto label is added to ensure `dmc1_clk` will be freed regardlessly. Signed-off-by: Shuhao Fu Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin

cpufreq: dt-platdev: Add JH7110S SOC to the allowlist

2026-01-08T09:13:56+00:00

[ Upstream commit 6e7970cab51d01b8f7c56f120486c571c22e1b80 ] Add the compatible strings for supporting the generic cpufreq driver on the StarFive JH7110S SoC. Signed-off-by: Hal Feng Reviewed-by: Heinrich Schuchardt Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin

cpufreq/amd-pstate: Call cppc_set_auto_sel() only for online CPUs

2025-12-18T12:54:56+00:00

[ Upstream commit bb31fef0d03ed17d587b40e3458786be408fb9df ] amd_pstate_change_mode_without_dvr_change() calls cppc_set_auto_sel() for all the present CPUs. However, this callpath eventually calls cppc_set_reg_val() which accesses the per-cpu cpc_desc_ptr object. This object is initialized only for online CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() --> acpi_cppc_processor_probe(). Hence, restrict calling cppc_set_auto_sel() to only the online CPUs. Fixes: 3ca7bc818d8c ("cpufreq: amd-pstate: Add guided mode control support via sysfs") Suggested-by: Mario Limonciello (AMD) (kernel.org) Signed-off-by: Gautham R. Shenoy Signed-off-by: Mario Limonciello (AMD) Signed-off-by: Sasha Levin