kernel/linux.git/drivers/cpufreq, branch v4.19.39

cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies

2019-04-05T20:33:03+00:00

[ Upstream commit 1222d527f314c86a3b59a522115d62facc5a7965 ] There is some rare cases where CPB (and possibly IDA) are missing on processors. This is the case fixed by commit f7f3dc00f612 ("x86/cpu/AMD: Fix erratum 1076 (CPB bit)") and following. In such context, the boost status isn't reported by /sys/devices/system/cpu/cpufreq/boost. This commit is about printing a message to report that the CPU doesn't expose the boost capabilities. This message could help debugging platforms hit by this phenomena. Signed-off-by: Erwan Velu [ rjw: Change the message text somewhat ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

cpufreq: pxa2xx: remove incorrect __init annotation

2019-03-23T19:10:01+00:00

commit 9505b98ccddc454008ca7efff90044e3e857c827 upstream. pxa_cpufreq_init_voltages() is marked __init but usually inlined into the non-__init pxa_cpufreq_init() function. When building with clang, it can stay as a standalone function in a discarded section, and produce this warning: WARNING: vmlinux.o(.text+0x616a00): Section mismatch in reference from the function pxa_cpufreq_init() to the function .init.text:pxa_cpufreq_init_voltages() The function pxa_cpufreq_init() references the function __init pxa_cpufreq_init_voltages(). This is often because pxa_cpufreq_init lacks a __init annotation or the annotation of pxa_cpufreq_init_voltages is wrong. Fixes: 50e77fcd790e ("ARM: pxa: remove __init from cpufreq_driver->init()") Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Reviewed-by: Nathan Chancellor Acked-by: Robert Jarzmik Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

cpufreq: tegra124: add missing of_node_put()

2019-03-23T19:10:01+00:00

commit 446fae2bb5395f3028d8e3aae1508737e5a72ea1 upstream. of_cpu_device_node_get() will increase the refcount of device_node, it is necessary to call of_node_put() at the end to release the refcount. Fixes: 9eb15dbbfa1a2 ("cpufreq: Add cpufreq driver for Tegra124") Cc: # 4.4+ Signed-off-by: Yangtao Li Acked-by: Thierry Reding Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman

cpufreq: kryo: Release OPP tables on module removal

2019-03-23T19:10:01+00:00

commit 0334906c06967142c8805fbe88acf787f65d3d26 upstream. Commit 5ad7346b4ae2 ("cpufreq: kryo: Add module remove and exit") made it possible to build the kryo cpufreq driver as a module, but it failed to release all the resources, i.e. OPP tables, when the module is unloaded. This patch fixes it by releasing the OPP tables, by calling dev_pm_opp_put_supported_hw() for them, from the qcom_cpufreq_kryo_remove() routine. The array of pointers to the OPP tables is also allocated dynamically now in qcom_cpufreq_kryo_probe(), as the pointers will be required while releasing the resources. Compile tested only. Cc: 4.18+ # v4.18+ Fixes: 5ad7346b4ae2 ("cpufreq: kryo: Add module remove and exit") Reviewed-by: Georgi Djakov Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman

cpufreq: Use struct kobj_attribute instead of struct global_attr

2019-03-10T06:17:15+00:00

commit 625c85a62cb7d3c79f6e16de3cfa972033658250 upstream. The cpufreq_global_kobject is created using kobject_create_and_add() helper, which assigns the kobj_type as dynamic_kobj_ktype and show/store routines are set to kobj_attr_show() and kobj_attr_store(). These routines pass struct kobj_attribute as an argument to the show/store callbacks. But all the cpufreq files created using the cpufreq_global_kobject expect the argument to be of type struct attribute. Things work fine currently as no one accesses the "attr" argument. We may not see issues even if the argument is used, as struct kobj_attribute has struct attribute as its first element and so they will both get same address. But this is logically incorrect and we should rather use struct kobj_attribute instead of struct global_attr in the cpufreq core and drivers and the show/store callbacks should take struct kobj_attribute as argument instead. This bug is caught using CFI CLANG builds in android kernel which catches mismatch in function prototypes for such callbacks. Reported-by: Donghee Han Reported-by: Sangkyu Kim Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

cpufreq: check if policy is inactive early in __cpufreq_get()

2019-02-20T09:25:40+00:00

[ Upstream commit 2f66196208c98b3d1b4294edffb2c5a8197be899 ] cpuinfo_cur_freq gets current CPU frequency as detected by hardware while scaling_cur_freq last known CPU frequency. Some platforms may not allow checking the CPU frequency of an offline CPU or the associated resources may have been released via cpufreq_exit when the CPU gets offlined, in which case the policy would have been invalidated already. If we attempt to get current frequency from the hardware, it may result in hang or crash. For example on Juno, I see: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 [0000000000000188] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform pstate: 40000005 (nZcv daif -PAN -UAO) pc : scmi_cpufreq_get_rate+0x34/0xb0 lr : scmi_cpufreq_get_rate+0x34/0xb0 Call trace: scmi_cpufreq_get_rate+0x34/0xb0 __cpufreq_get+0x34/0xc0 show_cpuinfo_cur_freq+0x24/0x78 show+0x40/0x60 sysfs_kf_seq_show+0xc0/0x148 kernfs_seq_show+0x44/0x50 seq_read+0xd4/0x480 kernfs_fop_read+0x15c/0x208 __vfs_read+0x60/0x188 vfs_read+0x94/0x150 ksys_read+0x6c/0xd8 __arm64_sys_read+0x24/0x30 el0_svc_common+0x78/0x100 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc ---[ end trace 3d1024e58f77f6b2 ]--- So fix the issue by checking if the policy is invalid early in __cpufreq_get before attempting to get the current frequency. Signed-off-by: Sudeep Holla Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

cpufreq: scmi: Fix frequency invariance in slow path

2019-01-16T21:04:29+00:00

commit 0e141d1c65c1dd31c914eb2e11651adcc1a15912 upstream. The scmi-cpufreq driver calls the arch_set_freq_scale() callback on frequency changes to provide scale-invariant load-tracking signals to the scheduler. However, in the slow path, it does so while specifying the current and max frequencies in different units, hence resulting in a broken freq_scale factor. Fix this by passing all frequencies in KHz, as stored in the CPUFreq frequency table. Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol) Signed-off-by: Quentin Perret Acked-by: Viresh Kumar Acked-by: Sudeep Holla Cc: 4.17+ # v4.17+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

cpufreq: ti-cpufreq: Only register platform_device when supported

2018-12-13T08:16:13+00:00

[ Upstream commit d98ccfc3948ab63152494bb6b9c17e15295c0310 ] Currently the ti-cpufreq driver blindly registers a 'ti-cpufreq' to force the driver to probe on any platforms where the driver is built in. However, this should only happen on platforms that actually can make use of the driver. There is already functionality in place to match the SoC compatible so let's factor this out into a separate call and make sure we find a match before creating the ti-cpufreq platform device. Reviewed-by: Johan Hovold Signed-off-by: Dave Gerlach Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

cpufreq: imx6q: add return value check for voltage scale

2018-12-01T08:37:32+00:00

[ Upstream commit 6ef28a04d1ccf718eee069b72132ce4aa1e52ab9 ] Add return value check for voltage scale when ARM clock rate change fail. Signed-off-by: Anson Huang Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

cpufreq: dt: Try freeing static OPPs only if we have added them

2018-11-13T19:08:24+00:00

[ Upstream commit 51c99dd2c06b234575661fa1e0a1dea6c3ef566f ] We can not call dev_pm_opp_of_cpumask_remove_table() freely anymore since the latest OPP core updates as that uses reference counting to free resources. There are cases where no static OPPs are added (using DT) for a platform and trying to remove the OPP table may end up decrementing refcount which is already zero and hence generating warnings. Lets track if we were able to add static OPPs or not and then only remove the table based on that. Some reshuffling of code is also done to do that. Reported-by: Niklas Cassel Tested-by: Niklas Cassel Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman