kernel/linux.git/drivers/cpufreq/Kconfig, branch v6.6.134

cpufreq: fix using cpufreq-dt as module

2025-02-27T12:10:45+00:00

[ Upstream commit f1f010c9d9c62c865d9f54e94075800ba764b4d9 ] This driver can be built as a module since commit 3b062a086984 ("cpufreq: dt-platdev: Support building as module"), but unfortunately this caused a regression because the cputfreq-dt-platdev.ko module does not autoload. Usually, this is solved by just using the MODULE_DEVICE_TABLE() macro to export all the device IDs as module aliases. But this driver is special due how matches with devices and decides what platform supports. There are two of_device_id lists, an allow list that are for CPU devices that always match and a deny list that's for devices that must not match. The driver registers a cpufreq-dt platform device for all the CPU device nodes that either are in the allow list or contain an operating-points-v2 property and are not in the deny list. Enforce builtin compile of cpufreq-dt-platdev to make autoload work. Fixes: 3b062a086984 ("cpufreq: dt-platdev: Support building as module") Link: https://lore.kernel.org/all/20241104201424.2a42efdd@akair/ Link: https://lore.kernel.org/all/20241119111918.1732531-1-javierm@redhat.com/ Cc: stable@vger.kernel.org Signed-off-by: Andreas Kemnade Reported-by: Radu Rendec Reported-by: Javier Martinez Canillas [ Viresh: Picked commit log from Javier, updated tags ] Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin

cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF

2023-06-30T07:43:43+00:00

The cpufreq-dt-platform.c driver requires CONFIG_OF to be selected. Mark it as a dependency. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202306250025.savpMM8L-lkp@intel.com/ Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

Merge tag 'cpufreq-arm-updates-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

2023-06-27T18:10:57+00:00

Pull ARM cpufreq updates for 6.5 from Viresh Kumar: "- Add support to build cpufreq-dt-platdev as module (Zhipeng Wang). - Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar). - Add support for TI's AM62A7 platform (Vibhore Vardhan). - Add support for Armada's ap807 platform (Russell King (Oracle)). - Add support for StarFive JH7110 SoC (Mason Huo). - Fix voltage selection for Mediatek Socs (Daniel Golle). - Fix error handling in Tegra's cpufreq driver (Christophe JAILLET). - Document Qualcomm's IPQ8074 in DT bindings (Robert Marko). - Don't warn for disabling a non-existing frequency for imx6q cpufreq driver (Christoph Niedermaier). - Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney)."

cpufreq: amd-pstate: Set default governor to schedutil

2023-06-20T10:18:08+00:00

The Kconfig currently defaults the governor to schedutil on x86_64 only when intel-pstate and SMP have been selected. If the kernel is built only with amd-pstate, the default governor should also be schedutil. Signed-off-by: Mario Limonciello Reviewed-by: Leo Li Acked-by: Huang Rui Tested-by: Perry Yuan Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

cpufreq: dt-platdev: Support building as module

2023-06-05T11:03:05+00:00

Make the cpufreq platdev driver as tristate so that it can be built as loadable module. Also add MODULE_LICENSE to support building as module. Signed-off-by: Zhipeng Wang [ Viresh: Merged two commits, included module.h ] Signed-off-by: Viresh Kumar

Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2023-02-21T20:13:58+00:00

Pull power management updates from Rafael Wysocki: "These add EPP support to the AMD P-state cpufreq driver, add support for new platforms to the Intel RAPL power capping driver, intel_idle and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194, drop the custom cpufreq driver for loongson1 that is not necessary any more (and the corresponding cpufreq platform device), fix assorted issues and clean up code. Specifics: - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya) - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang) - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney) - Enable thermal cooling for Tegra194 (Yi-Wei Wang) - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss) - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi) - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh) - Make cpufreq_unregister_driver() return void (Uwe Kleine-König) - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski) - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing) - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy) - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann) - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh) - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki) - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski) - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald) - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald) - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap) - Fix possible name leak in powercap_register_zone() (Yang Yingliang) - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui) - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada) - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui) - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman) - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring) - Fix error checking in opp_migrate_dentry() (Qi Zheng) - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio) - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler) - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap)" * tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: amd-pstate: disambiguate user space sections cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables PM: Add EXPORT macros for exporting PM functions cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT MIPS: loongson32: Drop obsolete cpufreq platform device powercap: intel_rapl: Fix handling for large time window cpuidle: driver: Update microsecond values of state parameters as needed cpuidle: sysfs: make kobj_type structures constant cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies PM: EM: fix memory leak with using debugfs_lookup() PM: domains: fix memory leak with using debugfs_lookup() cpufreq: Make kobj_type structure constant cpufreq: davinci: Fix clk use after free cpufreq: amd-pstate: avoid uninitialized variable use cpufreq: Make cpufreq_unregister_driver() return void OPP: fix error checking in opp_migrate_dentry() dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible ...

drivers/cpufreq: Remove "select SRCU"

2023-01-20T16:51:25+00:00

Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney Acked-by: Viresh Kumar Reviewed-by: John Ogness Signed-off-by: Rafael J. Wysocki

cpufreq: loongson1: Delete obsolete driver

2023-01-20T16:47:14+00:00

The generic DT based cpufreq driver works for Loongson-1, so delete the old custom driver. Signed-off-by: Keguang Zhang Signed-off-by: Rafael J. Wysocki

cpufreq: remove sa1100 driver

2023-01-16T08:26:05+00:00

The sa11xx platform has two cpufreq drivers, one for the older StrongARM1100 SoC, and a second one for StrongARM1110. After the removal of most SA1100 based machines, this driver is unused, and only the sa1110-cpufreq driver remains. Acked-by: Viresh Kumar Signed-off-by: Arnd Bergmann

cpufreq: loongson2: fix Kconfig "its" grammar

2022-07-25T18:34:56+00:00

Use the possessive "its" instead of the contraction "it's" where appropriate. Signed-off-by: Randy Dunlap Signed-off-by: Rafael J. Wysocki