kernel/linux.git/drivers/counter, branch v5.4.113

counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register

2021-04-14T06:24:09+00:00

commit b14d72ac731753708a7c1a6b3657b9312b6f0042 upstream Ceiling value may be miss-aligned with what's actually configured into the ARR register. This is seen after probe as currently the ARR value is zero, whereas ceiling value is set to the maximum. So: - reading ceiling reports zero - in case the counter gets enabled without any prior configuration, it won't count. - in case the function gets set by the user 1st, (priv->ceiling) is used. Fix it by getting rid of the cached "priv->ceiling" variable. Rather use the ARR register value directly by using regmap read or write when needed. There should be no drawback on performance as priv->ceiling isn't used in performance critical path. There's also no point in writing ARR while setting function (sms), so it can be safely removed. Fixes: ad29937e206f ("counter: Add STM32 Timer quadrature encoder") Suggested-by: William Breathitt Gray Signed-off-by: Fabrice Gasnier Acked-by: William Breathitt Gray Cc: Link: https://lore.kernel.org/r/1614793789-10346-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Jonathan Cameron [sudip: adjuct context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

counter: stm32-timer-cnt: fix ceiling write max value

2021-03-24T10:26:43+00:00

commit e4c3e133294c0a292d21073899b05ebf530169bd upstream. The ceiling value isn't checked before writing it into registers. The user could write a value higher than the counter resolution (e.g. 16 or 32 bits indicated by max_arr). This makes most significant bits to be truncated. Fix it by checking the max_arr to report a range error [1] to the user. [1] https://lkml.org/lkml/2021/2/12/358 Fixes: ad29937e206f ("counter: Add STM32 Timer quadrature encoder") Signed-off-by: Fabrice Gasnier Acked-by: William Breathitt Gray Cc: Link: https://lore.kernel.org/r/1614696235-24088-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED

2021-03-24T10:26:40+00:00

[ Upstream commit fae6f62e6a580b663ecf42c2120a0898deae9137 ] When in SLAVE_MODE_DISABLED mode, the count still increases if the counter is enabled because an internal clock is used. This patch fixes the stm32_count_function_get() and stm32_count_function_set() functions to properly handle this behavior. Fixes: ad29937e206f ("counter: Add STM32 Timer quadrature encoder") Cc: Fabrice Gasnier Cc: Maxime Coquelin Cc: Alexandre Torgue Signed-off-by: William Breathitt Gray Reviewed-by: Fabrice Gasnier Link: https://lore.kernel.org/r/20210226012931.161429-1-vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

counter: 104-quad-8: Add lock guards - generic interface

2020-05-02T06:48:44+00:00

commit fc069262261c43ed11d639dadcf982e79bfe652b upstream. Add lock protection from race conditions to 104-quad-8 counter driver generic interface code changes. Mutex calls used for protection. Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support") Signed-off-by: Syed Nayyar Waris Signed-off-by: William Breathitt Gray Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

counter/ftm-quaddec: Use device-managed registration API

2019-07-27T21:55:27+00:00

Make use of devm_counter_register. Then we can remove redundant unregistration API usage to make code simpler. Signed-off-by: Chuhong Yuan Signed-off-by: Jonathan Cameron

Merge tag 'staging-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2019-07-11T22:36:02+00:00

Pull staging and IIO driver updates from Greg KH: "Here is the big Staging and IIO driver update for 5.3-rc1. Lots of new IIO drivers are in here, along with loads of tiny staging driver cleanups and fixes. Overall we almost break even with the same lines added as removed. Full details are in the shortlog, they are too large to list here. All of these changes have been in linux-next for a while with no reported issues" * tag 'staging-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (608 commits) staging: kpc2000: simplify comparison to NULL in fileops.c staging: kpc2000: simplify comparison to NULL in dma.c staging: kpc2000: simplify comparison to NULL in kpc2000_spi.c staging: rtl8723bs: hal: remove redundant assignment to packetType staging: rtl8723bs: Change return type of hal_btcoex_IsBtDisabled() staging: rtl8723bs: Remove rtw_btcoex_DisplayBtCoexInfo() staging: rtl8723bs: Remove function rtw_btcoex_GetDBG() staging: rtl8723bs: Remove function rtw_btcoex_SetDBG() staging: rtl8723bs: Remove rtw_btcoex_IsBTCoexCtrlAMPDUSize() staging: rtl8723bs: Remove rtw_btcoex_BtInfoNotify() staging: rtl8723bs: Remove rtw_btcoex_ScanNotify() staging: rtl8723bs: Remove rtw_btcoex_SetSingleAntPath() staging: rtl8723bs: Remove rtw_btcoex_SetPGAntNum() staging: rtl8192e: remove redundant initialization of rtstatus staging: rtl8723bs: Remove rtw_btcoex_GetRaMask() staging: rtl8723bs: Remove rtw_btcoex_SetChipType() staging: rtl8723bs: Remove rtw_btcoex_ConnectNotify() staging: rtl8723bs: Remove rtw_btcoex_SetBTCoexist() staging: rtl8723bs: Remove rtw_btcoex_IsBtDisabled() staging: rtl8723bs: Remove rtw_btcoex_IsBtControlLps() ...

Merge tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2019-07-01T08:58:13+00:00

Jonathan writes: Second set of IIO device support, features, cleanups and minor fixes for 5.3. A few bits for the counters subsystem mixed in here as well. There are some late breaking fixes as well, which aren't so urgent they can't wait for the merge window. New Device Support * adf4371 - New driver + bindings. - Support the adf4372 PLL. Mostly ID and bindings. * ad8366 (note includes rework of driver needed to allow support for these). - Support the ADL5240 variable gain amplifier (VGA). - Support the ADA4961 digital gain amplifier (DGA). * dps310 - New driver, in several parts from different authors for this temp and pressure sensor. - Includes errata workaround for a temperature reading issue. * stk3310 - Support the stk3335, mostly ID. Features and cleanups * core - drop error handling on debugfs registration. - harden by making sure we don't overrun iio_chan_info_postfix. * docs - convert remaining docs to rst. At somepoint we'll fit these few into the main IIO docs. - improve sampling_frequency_available docs but explaining the range form. * ad_sigma_delta - Drop a pointless goto. * ad2s1210 - Drop pointless platform data null check seeing as we don't actually use platform data anymore. * ad7124 - Relax limitation on channel numbers to allow pseudo different channels. - Support control of whether the input is buffered via DT. - Use dynamic allocation for channel configuration to make it easier to support new devices. - YAML binding conversion. * ad7150 - Comment tidy up. - Consistent and simple if (ret) handling of i2c errors. - FIELD_GET and GENMASK. - Ternary rather than !!(condition) for readability. - Use macros to avoid repetition of channel definitions. * ad7606 - Add software channel config (rather that pin controlled) - Refactor to simplify addition of new part in future. * ad7746 - of_deivce_id table. * ad7780 - MAINTAINERS entry - YAML DT bindings. * ad8366 - Stop using core mlock in favour of well scoped local lock. - SPDX + copyright date update. * ad9834 - of_device_id table * adf4371 - Add support for output stage muting before lock on has occured. * adis library - MAINTAINERS entry to reflect that this now Alexandru's problem ;) * adis162xx: - Fix a slightly incorrect set of comments and print statements on minimum supported voltage. * adis16203 - of_device_id table. * adis16240 - Add of_device_id table (in two parts as first patch only used it for MODULE_DEVICE_TABLE.) * adt7316-spi - of_device_id table * adxl372 - YAML DT binding conversion. - Cleanup use of buffer callback functions (precursor to core rework). * bh1710 - Simplify getting the i2c adapter from the client. * dht11 - Mote to newer GPIO consumer interface. * kxcjk-1013.c - Add binding for sensor in display of some ultrabooks after userspace tools updated for it not be a problem to report two similar sensors. * imx7d - drop unused variables. - white space - define instead of variable for clock frequency that is fixed. - drop pointless error message. * messon_saradc - SPDX * sps30 - MAINTAINERS entry - YAML binding conversion. * st_accel - Tidy up ordering in various buffer related callbacks. This is part of a long running effort to simplify the core code. * stm32-dfsdm: - Manage the resolution cleanly in triggerd modes. - Add fast mode support which allows more flexible filter choices. - Add a comment on the reason for a 16 bit record when technically not 'required'. * st_lsm6dsx - Embed device name in the sensor_settings struct as i3c doesn't have a convenient name field to use for this. * xilinx-adc - Relax constraints on supported platforms to reflect that this can used with FPGAs on PCIe cards and hence many architectures. * counters/ftm-quaddec - Fix some formatting io MODULE_AUTHOR - MAINTAINERS entry Fixes * tools - fix incorrect handling of 32 bit channels. * sca3000 - Potential endian bug that is unlikely to bite anyone (be64 host seems unlikely for this old part). * stm32-adc - Add vdda-supply. On some boards it needs to be turned on to supply the ADC. DT bindings included. * stm32-dfsdm - Fix output resolution to work with filter orders other than 3. - Fix output datatype as it's signed and previously claimed not to be. * tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits) iio: iio-utils: Fix possible incorrect mask calculation iio: frequency: adf4371: Add support for output stage mute dt-bindings: iio: frequency: Add ADF4372 PLL documentation iio: frequency: adf4371: Add support for ADF4372 PLL dt-bindings: iio: adc: Add buffered input property Convert AD7124 bindings documentation to YAML format. iio: adc: ad7124: Shift to dynamic allocation for channel configuration iio: adc: ad7124: Add buffered input support iio: adc: ad7124: Remove input number limitation MAINTAINERS: add ADIS IMU driver library entry iio: adis162xx: fix low-power docs & reports counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR iio: core: no need to check return value of debugfs_create functions docs: iio: convert to ReST iio: adc: stm32-adc: add missing vdda-supply dt-bindings: iio: adc: stm32: add missing vdda supply iio: adc: stm32-dfsdm: add comment for 16 bits record iio: adc: stm32-dfsdm: add fast mode support iio: adc: stm32-dfsdm: manage data resolution in trigger mode iio: adc: stm32-dfsdm: fix data type ...

Merge 5.2-rc6 into char-misc-next

2019-06-23T07:23:33+00:00

We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman

counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR

2019-06-22T09:57:13+00:00

The last '>' chars were missing in the MODULE_AUTHOR entries. Reported-by: Randy Dunlap Fixes: a3b9a99980d9 ("counter: add FlexTimer Module Quadrature decoder counter driver") Signed-off-by: Patrick Havelange Signed-off-by: William Breathitt Gray Signed-off-by: Jonathan Cameron

Merge tag 'iio-fixes-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

2019-06-17T20:28:29+00:00

Jonathan writes: Second set of IIO fixes for the 5.2 cycle. * ad7150 - sense of bit for controlling adaptive vs fixed threshold was flipped. * adt7316 - Fix a build issue due to wrong headers for gpio usage. * lsm6dsx - correctly suspend / resume i2c slaves when the host goes to sleep. * mlx90632 - relax a compatability check to allow for newer devices. Also one counters fix * counter/ftm-quaddec - missing dependencies in Kconfig. * tag 'iio-fixes-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: counter/ftm-quaddec: Add missing dependencies in Kconfig staging: iio: adt7316: Fix build errors when GPIOLIB is not set iio: temperature: mlx90632 Relax the compatibility check iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller staging:iio:ad7150: fix threshold mode config bit