kernel/linux.git/drivers/clocksource/samsung_pwm_timer.c, branch linux-7.1.y

of: remove internal arguments from of_property_for_each_u32()

2024-07-25T11:53:47+00:00

The of_property_for_each_u32() macro needs five parameters, two of which are primarily meant as internal variables for the macro itself (in the for() clause). Yet these two parameters are used by a few drivers, and this can be considered misuse or at least bad practice. Now that the kernel uses C11 to build, these two parameters can be avoided by declaring them internally, thus changing this pattern: struct property *prop; const __be32 *p; u32 val; of_property_for_each_u32(np, "xyz", prop, p, val) { ... } to this: u32 val; of_property_for_each_u32(np, "xyz", val) { ... } However two variables cannot be declared in the for clause even with C11, so declare one struct that contain the two variables we actually need. As the variables inside this struct are not meant to be used by users of this macro, give the struct instance the noticeable name "_it" so it is visible during code reviews, helping to avoid new code to use it directly. Most usages are trivially converted as they do not use those two parameters, as expected. The non-trivial cases are: - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the checks had to be replicated in a different way, making code more verbose and somewhat uglier, but I refrained from a full rework to keep as much of the original code untouched having no hardware to test my changes All the changes have been build tested. The few for which I have the hardware have been runtime-tested too. Reviewed-by: Andre Przywara # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c Acked-by: Bartosz Golaszewski # drivers/gpio/gpio-brcmstb.c Acked-by: Nicolas Ferre # drivers/irqchip/irq-atmel-aic-common.c Acked-by: Jonathan Cameron # drivers/iio/adc/ti_am335x_adc.c Acked-by: Uwe Kleine-König # drivers/pwm/pwm-samsung.c Acked-by: Richard Leitner # drivers/usb/misc/usb251xb.c Acked-by: Mark Brown # sound/soc/codecs/arizona.c Reviewed-by: Richard Fitzgerald # sound/soc/codecs/arizona.c Acked-by: Michael Ellerman # arch/powerpc/sysdev/xive/spapr.c Acked-by: Stephen Boyd # clk Signed-off-by: Luca Ceresoli Acked-by: Lee Jones Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com Signed-off-by: Rob Herring (Arm)

clocksource/drivers/samsung_pwm: Constify source IO memory

2021-06-04T08:12:13+00:00

The 'source_reg' IO memory is only read, so the pointer can point to const for safety. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210506202729.157260-4-krzysztof.kozlowski@canonical.com

clocksource/drivers/samsung_pwm: Cleanup on init error

2021-06-04T08:12:12+00:00

Failure of timer initialization is likely to be fatal for the system, so cleanup in such case is not strictly necessary. However the code might be refactored or reused, so better not to rely on such assumption that system won't continue init failure. Unmap the IO memory and put the clock on initialization failures from devicetree. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210506202729.157260-3-krzysztof.kozlowski@canonical.com

clocksource/drivers/samsung_pwm: Constify passed structure

2021-06-04T08:12:11+00:00

The 'struct samsung_pwm_variant' argument passed to initialization functions is not modified, so it can be made const for safety. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210506202729.157260-2-krzysztof.kozlowski@canonical.com

clocksource/drivers/samsung_pwm: Minor whitespace cleanup

2021-06-04T08:12:10+00:00

Cleanup the code to be slightly more readable and follow coding convention - only whitespace. This fixes checkpatch warnings: WARNING: Block comments should align the * on each line WARNING: please, no space before tabs WARNING: Missing a blank line after declarations CHECK: Alignment should match open parenthesis Signed-off-by: Krzysztof Kozlowski Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210506202729.157260-1-krzysztof.kozlowski@canonical.com

clocksource: Replace setup_irq() by request_irq()

2020-02-27T11:15:24+00:00

request_irq() is preferred over setup_irq(). The early boot setup_irq() invocations happen either via 'init_IRQ()' or 'time_init()', while memory allocators are ready by 'mm_init()'. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Seldom remove_irq() usage has been observed coupled with setup_irq(), wherever that has been found, it too has been replaced by free_irq(). A build error that was reported by kbuild test robot in the previous version of the patch also has been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/91961c77c1cf93d41523f5e1ac52043f32f97077.1582799709.git.afzal.mohd.ma@gmail.com

clocksource: samsung_pwm_timer: Use pr_warn instead of pr_warning

2019-10-18T13:00:20+00:00

As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of pr_warning"), removing pr_warning so all logging messages use a consistent _warn style. Let's do it. Link: http://lkml.kernel.org/r/20191018031850.48498-11-wangkefeng.wang@huawei.com To: linux-kernel@vger.kernel.org Signed-off-by: Kefeng Wang Acked-by: Daniel Lezcano Reviewed-by: Sergey Senozhatsky [pmladek@suse.com: Fixed indentation] Signed-off-by: Petr Mladek

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

clocksource/drivers: Rename CLKSRC_OF to TIMER_OF

2017-06-14T10:01:03+00:00

The config option name is now renamed to 'TIMER_OF' for consistency with the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change. Signed-off-by: Daniel Lezcano Reviewed-by: Linus Walleij

clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE

2017-06-14T09:58:45+00:00

The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano Acked-by: Heiko Stuebner Acked-by: Neil Armstrong Acked-by: Arnd Bergmann Acked-by: Matthias Brugger Reviewed-by: Linus Walleij