kernel/linux.git/drivers/clocksource/dw_apb_timer_of.c, branch v6.19.11

clocksource/drivers/dw_apb_timer_of: Fix probe failure

2021-12-10T16:46:54+00:00

The driver refuses to probe with -EINVAL since the commit 5d9814df0aec ("clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available"). Before the driver used to probe successfully if either "clock-freq" or "clock-frequency" properties has been specified in the device tree. That commit changed if (A && B) panic("No clock nor clock-frequency property"); into if (!A && !B) return 0; That's a bug: the reverse of `A && B` is '!A || !B', not '!A && !B' Signed-off-by: Vadim V. Vlasov Signed-off-by: Alexey Sheplyakov Fixes: 5d9814df0aec56a6 ("clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available"). Cc: Daniel Lezcano Cc: Dinh Nguyen Cc: Thomas Gleixner Cc: Vadim V. Vlasov Acked-by: Dinh Nguyen Link: https://lore.kernel.org/r/20211109153401.157491-1-asheplyakov@basealt.ru Signed-off-by: Daniel Lezcano

clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak

2021-04-08T11:24:53+00:00

Add calls to disable the clock and unmap the timer base address in case of any failures. Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Dinh Nguyen Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210322121844.2271041-1-dinguyen@kernel.org

timekeeping, clocksource: Fix various typos in comments

2021-03-22T22:06:48+00:00

Fix ~56 single-word typos in timekeeping & clocksource code comments. Signed-off-by: Ingo Molnar Cc: Thomas Gleixner Cc: John Stultz Cc: Stephen Boyd Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org

clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available

2020-12-05T18:33:55+00:00

commit ("b0fc70ce1f02 arm64: berlin: Select DW_APB_TIMER_OF") added the support for the dw_apb_timer into the arm64 defconfig. However, for some platforms like the Intel Stratix10 and Agilex, the clock manager doesn't get loaded until after the timer driver get loaded. Thus, the driver hits the panic "No clock nor clock-frequency property for" because it cannot properly get the clock. This patch adds the error handling needed for the timer driver so that the kernel can continue booting instead of just hitting the panic. Signed-off-by: Dinh Nguyen Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20201205105223.208604-1-dinguyen@kernel.org

clocksource: dw_apb_timer_of: Fix missing clockevent timers

2020-05-22T22:02:59+00:00

Commit 100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init") replaced a publicly available driver initialization method with one called by the timer_probe() method available after CLKSRC_OF. In current implementation it traverses all the timers available in the system and calls their initialization methods if corresponding devices were either in dtb or in acpi. But if before the commit any number of available timers would be installed as clockevent and clocksource devices, after that there would be at most two. The rest are just ignored since default case branch doesn't do anything. I don't see a reason of such behaviour, neither the commit message explains it. Moreover this might be wrong if on some platforms these timers might be used for different purpose, as virtually CPU-local clockevent timers and as an independent broadcast timer. So in order to keep the compatibility with the platforms where the order of the timers detection has some meaning, lets add the secondly discovered timer to be of clocksource/sched_clock type, while the very first and the others would provide the clockevents service. Fixes: 100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init") Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Paul Burton Cc: Ralf Baechle Cc: Alessandro Zummo Cc: Alexandre Belloni Cc: Arnd Bergmann Cc: Rob Herring Cc: linux-mips@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ru

clocksource: dw_apb_timer: Affiliate of-based timer with any CPU

2020-05-22T22:02:50+00:00

Currently any DW APB Timer device detected in OF is bound to CPU #0. Doing so is redundant since DW APB Timer isn't CPU-local timer, but as having APB interface is normally accessible from any CPU in the system. By artificially affiliating the DW timer to the very first CPU we may and in our case will make the clockevent subsystem to decline the more performant real CPU-local timers selection in favor of in fact non-local and accessible over a slow bus - DW APB Timers. Let's not affiliate the of-detected DW APB Timers to any CPU. By doing so the clockevent framework would prefer to select the real CPU-local timer instead of DW APB one. Otherwise if there is no other than DW APB device for clockevents tracking then it will be selected. Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Paul Burton Cc: Ralf Baechle Cc: Alessandro Zummo Cc: Alexandre Belloni Cc: Arnd Bergmann Cc: Rob Herring Cc: linux-mips@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200521204818.25436-6-Sergey.Semin@baikalelectronics.ru

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

2019-06-19T15:09:07+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Reviewed-by: Enrico Weigelt Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/dw_apb: Add reset control

2018-10-07T12:16:35+00:00

Add code to retrieve the reset property from the dw-apb timers and if the property is available, the safe operation is to assert the timer into reset, and followed by a deassert of the timer reset (brings the timer out of reset). This patch is needed for systems where the bootloader has left the timer not used in reset. - Trivial conflict with commit a74bd1ad7a: "Convert to using %pOFn instead of device_node.name" Reported-by: Marek Vasut Signed-off-by: Dinh Nguyen Signed-off-by: Daniel Lezcano

clocksource: Convert to using %pOFn instead of device_node.name

2018-10-03T12:36:52+00:00

In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Michal Simek Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring Signed-off-by: Daniel Lezcano

clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE

2017-06-14T09:58:45+00:00

The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano Acked-by: Heiko Stuebner Acked-by: Neil Armstrong Acked-by: Arnd Bergmann Acked-by: Matthias Brugger Reviewed-by: Linus Walleij