kernel/linux.git/drivers/clk/versatile, branch v4.14.263

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

clk: versatile: make clk_ops const

2017-08-31T05:38:59+00:00

Make this const as it is only stored in the const field of a clk_init_data structure. Signed-off-by: Bhumika Goyal Acked-by: Liviu Dudau Signed-off-by: Stephen Boyd

clk: versatile: delete old RealView clock implementation

2017-06-02T23:27:17+00:00

The old RealView clock implementation is not used anymore (nothing in the kernel calls realview_clk_init()) as we have moved all clocks over to device tree. Delete it. Signed-off-by: Linus Walleij Signed-off-by: Stephen Boyd

ARM/clk: move the ICST library to drivers/clk

2017-04-07T09:58:12+00:00

This moves the ICST clock divider helper library from arch/arm/common to drivers/clk/versatile so it is maintained with the other clock drivers. We keep the structure as a helper library intact and do not fuse it with the clk-icst.c Versatile ICST clock driver: there may be other users out there that need to use this library for their clocking, and then it will be helpful to keep the library contained. (The icst.[c|h] files could just be moved to drivers/clk/lib or a similar location to share the library.) Acked-by: Stephen Boyd Signed-off-by: Linus Walleij

clk: versatile/icst: support for AP baseboard clocks

2016-08-29T18:38:51+00:00

This adds support for the two ICST525-based clocks on the Integrator/AP baseboard, as documented in the board manual "Integrator/AP ASIC Development Motherboard", ARM DUI0098 B, pages 3-15 thru 3-18. Cc: Russell King Signed-off-by: Linus Walleij [sboyd@codeaurora.org: fixed uninitialized val warning] Signed-off-by: Stephen Boyd

clk: versatile/icst: add Integrator core module clocks

2016-08-25T20:03:52+00:00

The Integrator/AP and Integrator/CP have special derivatives of the ICST525 control registers, where some bits have been hardwired but others are possible to adjust, resulting in a control register that makes it possible to set an even, desired megahertz value. The Integrator/AP and Integrator/CP have slightly different layout so we support them using different compatible strings. After adding these clocks, the Integrator-specific cpufreq driver can be switched over to use the generic operating point device tree cpufreq driver. Instead of simply writing a value to the oscillator control register we switch to the more elaborate method of providing a bitmask and use regmap_update_bits() to poke the right bits for the desired frequency, this is needed since these control registers sometimes control more than one clock. Cc: Russell King Signed-off-by: Linus Walleij Signed-off-by: Stephen Boyd

clk: versatile: Remove CLK_IS_ROOT

2016-03-15T22:19:21+00:00

This flag is a no-op now. Remove usage of the flag. Cc: Pawel Moll Acked-by: Linus Walleij Signed-off-by: Stephen Boyd

clk: versatile: sp810: support reentrance

2016-02-25T23:03:28+00:00

Despite care take to allocate clocks state containers the SP810 driver actually just supports creating one instance: all clocks registered for every instance will end up with the exact same name and __clk_init() will fail. Rename the timclken<0> .. timclken to sp810__ so every clock on every instance gets a unique name. This is necessary for the RealView PBA8 which has two SP810 blocks: the second block will not register its clocks unless every clock on every instance is unique and results in boot logs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137 clk_sp810_of_setup+0x110/0x154() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc2-00030-g352718fc39f6-dirty #225 Hardware name: ARM RealView Machine (Device Tree Support) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x84/0x9c) [] (dump_stack) from [] (warn_slowpath_common+0x74/0xb0) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (clk_sp810_of_setup+0x110/0x154) [] (clk_sp810_of_setup) from [] (of_clk_init+0x12c/0x1c8) [] (of_clk_init) from [] (time_init+0x20/0x2c) [] (time_init) from [] (start_kernel+0x244/0x3c4) [] (start_kernel) from [<7000807c>] (0x7000807c) ---[ end trace cb88537fdc8fa200 ]--- Cc: Michael Turquette Cc: Pawel Moll Fixes: 6e973d2c4385 "clk: vexpress: Add separate SP810 driver" Signed-off-by: Linus Walleij Signed-off-by: Stephen Boyd

clk: versatile: mask VCO bits before writing

2016-02-10T17:56:31+00:00

The Versatile syscon ICST driver OR:s the bits into place but forgets to mask the previous value, making the code only work if the register is zero or giving haphazard results. Mask the 19 bits used by the Versatile syscon interface register. Regression caused and now fixed by yours truly. Cc: Michael Turquette Cc: Stephen Boyd Cc: linux-clk@vger.kernel.org Fixes: 179c8fb3c2a6 ("clk: versatile-icst: convert to use regmap") Signed-off-by: Linus Walleij Signed-off-by: Stephen Boyd

Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-01-21T02:03:56+00:00

Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...