kernel/linux.git/drivers/clk/thead, branch v6.18.22

clk: thead: th1520-ap: Poll for PLL lock and wait for stability

2026-02-26T22:59:28+00:00

[ Upstream commit 892abfbed71e8e0fc5d6ccee1e975904805c6327 ] All PLLs found on TH1520 SoC take 21250ns at maximum to lock, and their lock status is indicated by register PLL_STS (offset 0x80 inside AP clock controller). We should poll the register to ensure the PLL actually locks after enabling it. Furthermore, a 30us delay is added after enabling the PLL, after which the PLL could be considered stable as stated by vendor clock code. Fixes: 56a48c1833aa ("clk: thead: add support for enabling/disabling PLLs") Reviewed-by: Drew Fustini Signed-off-by: Yao Zi Signed-off-by: Drew Fustini Signed-off-by: Sasha Levin

Merge branches 'clk-bindings', 'clk-cleanup', 'clk-renesas', 'clk-thead' and 'clk-spacemit' into clk-next

2025-10-06T17:56:23+00:00

* clk-bindings: dt-bindings: clock: mediatek: Add power-domains property dt-bindings: clock: silabs,si5341: Add missing properties dt-bindings: clock: adi,axi-clkgen: add clock-output-names property dt-bindings: clock: Remove unused fujitsu,mb86s70-crg11 binding dt-bindings: clock: Convert silabs,si570 to DT schema dt-bindings: clock: Convert silabs,si5341 to DT schema dt-bindings: clock: Convert silabs,si514/544 to DT schema * clk-cleanup: clk: tegra: do not overallocate memory for bpmp clocks clk: ep93xx: Use int type to store negative error codes dt-bindings: clock: st: flexgen: remove deprecated compatibles clk: st: flexgen: remove unused compatible clk: clk-axi-clkgen: remove unneeded semicolon clk: tegra: Remove redundant semicolons clk: npcm: select CONFIG_AUXILIARY_BUS clk: remove unneeded 'fast_io' parameter in regmap_config * clk-renesas: (27 commits) clk: renesas: r9a09g05[67]: Reduce differences clk: renesas: r9a09g047: Add USB3.0 clocks/resets clk: renesas: cpg-mssr: Fix memory leak in cpg_mssr_reserved_init() clk: renesas: r9a09g056: Add clock and reset entries for I3C clk: renesas: r9a09g057: Add clock and reset entries for I3C dt-bindings: clock: renesas,r9a09g047-cpg: Add USB3.0 core clocks clk: renesas: r9a09g077: Add Ethernet Subsystem core and module clocks clk: renesas: rzv2h: Simplify polling condition in __rzv2h_cpg_assert() clk: renesas: rzv2h: Re-assert reset on deassert timeout clk: renesas: rzg2l: Re-assert reset on deassert timeout clk: renesas: rzg2l: Simplify rzg2l_cpg_assert() and rzg2l_cpg_deassert() dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet clock IDs clk: renesas: r9a09g047: Add GPT clocks and resets clk: renesas: r9a09g077: Add module clocks for SCI1-SCI5 clk: renesas: rzv2h: remove round_rate() in favor of determine_rate() clk: renesas: rzg2l: convert from round_rate() to determine_rate() clk: renesas: r9a07g04[34]: Use tabs instead of spaces clk: renesas: r9a07g043: Add MSTOP for RZ/G2UL clk: renesas: r9a07g044: Add MSTOP for RZ/G2L clk: renesas: r9a08g045: Add MSTOP for GPIO ... * clk-thead: clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL clk: thead: support changing DPU pixel clock rate clk: thead: add support for enabling/disabling PLLs clk: thead: Correct parent for DPU pixel clocks clk: thead: th1520-ap: fix parent of padctrl0 clock clk: thead: th1520-ap: describe gate clocks with clk_gate * clk-spacemit: clk: spacemit: fix i2s clock clk: spacemit: introduce pre-div for ddn clock dt-bindings: clock: spacemit: introduce i2s pre-clock to fix i2s clock clk: spacemit: ccu_pll: convert from round_rate() to determine_rate() clk: spacemit: ccu_mix: convert from round_rate() to determine_rate() clk: spacemit: ccu_ddn: convert from round_rate() to determine_rate() clk: spacemit: fix sspax_clk dt-bindings: clock: spacemit: CLK_SSPA_I2S_BCLK for SSPA

clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL

2025-08-18T21:58:23+00:00

The AXI crossbar of TH1520 has no proper timeout handling, which means gating AXI clocks can easily lead to bus timeout and thus system hang. Set all AXI clock gates to CLK_IS_CRITICAL. All these clock gates are ungated by default on system reset. In addition, convert all current CLK_IGNORE_UNUSED usage to CLK_IS_CRITICAL to prevent unwanted clock gating. Signed-off-by: Icenowy Zheng Reviewed-by: Drew Fustini Signed-off-by: Drew Fustini

clk: thead: support changing DPU pixel clock rate

2025-08-18T21:58:23+00:00

The DPU pixel clock rate corresponds to the required dot clock of the display mode, so it needs to be tweakable. Add support to change it, by adding generic divider setting code, arming the code to the dpu0/dpu1 clocks, and setting the pixel clock connected to the DPU (after a gate) to CLK_SET_RATE_PARENT to propagate it to the dividers. Signed-off-by: Icenowy Zheng Reviewed-by: Drew Fustini Signed-off-by: Drew Fustini

clk: thead: add support for enabling/disabling PLLs

2025-08-18T21:58:23+00:00

The 2nd control word of T-Head TH1520 PLLs contains a bit to put the VCO into reset state, which means disabling the PLL. Some PLLs are put to disabled state by the bootloader, and the clock driver should be able to enable them. Add support for enabling/disabling PLLs. PLLs other than DPU ones are set CLK_IS_CRITICAL to prevent killing the system -- they're meant to drive CPU or system buses (even the GMAC/Video ones are driving arbitrary buses). Signed-off-by: Icenowy Zheng Reviewed-by: Drew Fustini Signed-off-by: Drew Fustini

clk: thead: Correct parent for DPU pixel clocks

2025-08-18T21:58:23+00:00

The dpu0_pixelclk and dpu1_pixelclk gates were incorrectly parented to the video_pll_clk. According to the TH1520 TRM, the "dpu0_pixelclk" should be sourced from "DPU0 PLL DIV CLK". In this driver, "DPU0 PLL DIV CLK" corresponds to the `dpu0_clk` clock, which is a divider whose parent is the `dpu0_pll_clk`. This patch corrects the clock hierarchy by reparenting `dpu0_pixelclk` to `dpu0_clk`. By symmetry, `dpu1_pixelclk` is also reparented to its correct source, `dpu1_clk`. Fixes: 50d4b157fa96 ("clk: thead: Add clock support for VO subsystem in T-HEAD TH1520 SoC") Reported-by: Icenowy Zheng Signed-off-by: Michal Wilczynski [Icenowy: add Drew's R-b and rebased atop ccu_gate refactor] Reviewed-by: Drew Fustini Signed-off-by: Icenowy Zheng Signed-off-by: Drew Fustini

clk: thead: th1520-ap: fix parent of padctrl0 clock

2025-08-18T21:58:23+00:00

The padctrl0 clock seems to be a child of the perisys_apb4_hclk clock, gating the later makes padctrl0 registers stuck too. Fix this relationship. Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks") Signed-off-by: Icenowy Zheng Reviewed-by: Drew Fustini Reviewed-by: Troy Mitchell Signed-off-by: Drew Fustini

clk: thead: th1520-ap: describe gate clocks with clk_gate

2025-08-18T21:54:38+00:00

Similar to previous situation of mux clocks, the gate clocks of clk-th1520-ap drivers are also using a helper that creates a temporary struct clk_hw and abandons the struct clk_hw in struct ccu_common, which prevents clock gates to be clock parents. Do the similar refactor of dropping struct ccu_common and directly use struct clk_gate here. This patch mimics the refactor done on struct ccu_mux in 54edba916e29 ("clk: thead: th1520-ap: Describe mux clocks with clk_mux"). Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks") Signed-off-by: Icenowy Zheng Reviewed-by: Drew Fustini Signed-off-by: Drew Fustini

clk: remove unneeded 'fast_io' parameter in regmap_config

2025-08-14T19:50:35+00:00

When using MMIO with regmap, fast_io is implied. No need to set it again. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20250813161517.4746-3-wsa+renesas@sang-engineering.com Signed-off-by: Stephen Boyd

clk: thead: th1520-ap: Describe mux clocks with clk_mux

2025-07-22T22:40:54+00:00

Mux clocks are now described with a customized ccu_mux structure consisting of ccu_internal and ccu_common substructures, and registered later with devm_clk_hw_register_mux_parent_data_table(). As this helper always allocates a new clk_hw structure, it's extremely hard to use mux clocks as parents statically by clk_hw pointers, since CCF has no knowledge about the clk_hw structure embedded in ccu_mux. This scheme already causes issues for clock c910, which takes a mux clock, c910-i0, as a possible parent. With mainline U-Boot that reparents c910 to c910-i0 at boottime, c910 is considered as an orphan by CCF. This patch refactors handling of mux clocks, embeds a clk_mux structure in ccu_mux directly. Instead of calling devm_clk_hw_register_mux_*(), we could register mux clocks on our own without allocating any new clk_hw pointer, fixing c910 clock's issue. Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks") Signed-off-by: Yao Zi Signed-off-by: Drew Fustini