kernel/linux.git/drivers/clk/tegra, branch v5.6.17

clk: tegra: Fix Tegra PMC clock out parents

2020-04-23T08:38:03+00:00

[ Upstream commit 6fe38aa8cac3a5db38154331742835a4d9740788 ] Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents are osc, osc_div2, osc_div4 and extern clock. Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4 for PMC clocks. This patch fixes this. Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', 'clk-freescale' and 'clk-qoriq' into clk-next

2020-01-31T21:14:26+00:00

- Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings

clk: tegra20/30: Explicitly set parent clock for Video Decoder

2020-01-10T14:50:43+00:00

The VDE parent won't be changed automatically to PLLC if bootloader didn't do that for us, hence let's explicitly set the parent for consistency. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra20/30: Don't pre-initialize displays parent clock

2020-01-10T14:50:25+00:00

Both Tegra20 and Tegra30 are initializing display's parent clock incorrectly because PLLP is running at 216/408MHz while display rate is set to 600MHz, but pre-setting the parent isn't needed at all because display driver selects proper parent anyways. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation

2020-01-10T14:50:05+00:00

UART clock is divided using divisor values from DLM/DLL registers when enable-bit is unset in clk register and clk's divider configuration isn't taken onto account in this case. This doesn't cause any problems, but let's add a check for the divider's enable-bit state, for consistency. Acked-by: Peter De Schrijver Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe()

2020-01-10T14:39:03+00:00

pm_runtime_irq_safe() is not needed as interrupts are allowed during suspend and resume. This was added mistakenly during DFLL suspend and resume support patch. While at it, also update the description of the dev argument that is passed to the tegra_dfll_suspend() function. Signed-off-by: Sowjanya Komatineni Reviewed-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra: Mark fuse clock as critical

2020-01-08T11:55:19+00:00

For a little over a year, U-Boot on Tegra124 has configured the flow controller to perform automatic RAM re-repair on off->on power transitions of the CPU rail[1]. This is mandatory for correct operation of Tegra124. However, RAM re-repair relies on certain clocks, which the kernel must enable and leave running. The fuse clock is one of those clocks. Mark this clock as critical so that LP1 power mode (system suspend) operates correctly. [1] 3cc7942a4ae5 ARM: tegra: implement RAM repair Reported-by: Jonathan Hunter Cc: stable@vger.kernel.org Signed-off-by: Stephen Warren Signed-off-by: Thierry Reding

clk: tegra: Fix double-free in tegra_clk_init()

2019-12-24T08:01:06+00:00

It's unlikely to happen in practice ever, but makes static checkers happy. Fixes: 535f296d47de ("clk: tegra: Add suspend and resume support on Tegra210") Reported-by: Stephen Boyd Signed-off-by: Dmitry Osipenko Link: https://lkml.kernel.org/r/20191210020512.6088-1-digetx@gmail.com Acked-by: Thierry Reding Signed-off-by: Stephen Boyd

clk: tegra: Use match_string() helper to simplify the code

2019-11-13T23:03:27+00:00

match_string() returns the array index of a matching string. Use it instead of the open-coded implementation. Signed-off-by: YueHaibing Link: https://lkml.kernel.org/r/20191109034226.21044-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd

clk: tegra: Fix build error without CONFIG_PM_SLEEP

2019-11-11T13:53:05+00:00

If CONFIG_PM_SLEEP is n, build fails: drivers/clk/tegra/clk-tegra210.c:3426:13: error: tegra210_clk_suspend undeclared here (not in a function); did you mean tegra_clk_ndspeed? .suspend = tegra210_clk_suspend, ^~~~~~~~~~~~~~~~~~~~ tegra_clk_ndspeed drivers/clk/tegra/clk-tegra210.c:3427:12: error: tegra210_clk_resume undeclared here (not in a function); did you mean tegra210_clk_suspend? .resume = tegra210_clk_resume, Use ifdef to guard this. Reported-by: Hulk Robot Fixes: 27d10d548c04 ("clk: tegra: Add suspend and resume support on Tegra210") Signed-off-by: YueHaibing Signed-off-by: Thierry Reding