kernel/linux.git/drivers/clk/qcom, branch v5.4.50

clk: qcom: msm8916: Fix the address location of pll->config_reg

2020-06-24T15:50:09+00:00

[ Upstream commit f47ab3c2f5338828a67e89d5f688d2cef9605245 ] During the process of debugging a processor derived from the msm8916 which we found the new processor was not starting one of its PLLs. After tracing the addresses and writes that downstream was doing and comparing to upstream it became obvious that we were writing to a different register location than downstream when trying to configure the PLL. This error is also present in upstream msm8916. As an example clk-pll.c::clk_pll_recalc_rate wants to write to pll->config_reg updating the bit-field POST_DIV_RATIO. That bit-field is defined in PLL_USER_CTL not in PLL_CONFIG_CTL. Taking the BIMC PLL as an example lm80-p0436-13_c_qc_snapdragon_410_processor_hrd.pdf 0x01823010 GCC_BIMC_PLL_USER_CTL 0x01823014 GCC_BIMC_PLL_CONFIG_CTL This pattern is repeated for gpll0, gpll1, gpll2 and bimc_pll. This error is likely not apparent since the bootloader will already have initialized these PLLs. This patch corrects the location of config_reg from PLL_CONFIG_CTL to PLL_USER_CTL for all relevant PLLs on msm8916. Fixes commit 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support") Cc: Georgi Djakov Cc: Andy Gross Cc: Bjorn Andersson Cc: Michael Turquette Cc: Stephen Boyd Signed-off-by: Bryan O'Donoghue Link: https://lkml.kernel.org/r/20200329124116.4185447-1-bryan.odonoghue@linaro.org Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: gcc: Fix parent for gpll0_out_even

2020-06-03T06:21:23+00:00

[ Upstream commit a76f274182f054481182c81cd62bb8794a5450a6 ] Documentation says that gpll0 is parent of gpll0_out_even, somehow driver coded that as bi_tcxo, so fix it Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150") Reported-by: Jonathan Marek Signed-off-by: Vinod Koul Link: https://lkml.kernel.org/r/20200521052728.2141377-1-vkoul@kernel.org Reviewed-by: Bjorn Andersson Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: smd: Add missing bimc clock

2020-02-24T07:36:38+00:00

[ Upstream commit 87ec9adcca71801a44ddb311185b17df09839ab5 ] It turns out booting the modem is dependent on a bimc vote from Linux on msm8998. To make the modem happy, add the bimc clock to rely on the default vote from rpmcc. Once we have interconnect support, bimc should be controlled properly. Fixes: 6131dc81211c ("clk: qcom: smd: Add support for MSM8998 rpm clocks") Signed-off-by: Jeffrey Hugo Link: https://lkml.kernel.org/r/20191217165409.4919-1-jeffrey.l.hugo@gmail.com Reviewed-by: Bjorn Andersson Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: rcg2: Don't crash if our parent can't be found; return an error

2020-02-24T07:36:32+00:00

[ Upstream commit 908b050114d8fefdddc57ec9fbc213c3690e7f5f ] When I got my clock parenting slightly wrong I ended up with a crash that looked like this: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... pc : clk_hw_get_rate+0x14/0x44 ... Call trace: clk_hw_get_rate+0x14/0x44 _freq_tbl_determine_rate+0x94/0xfc clk_rcg2_determine_rate+0x2c/0x38 clk_core_determine_round_nolock+0x4c/0x88 clk_core_round_rate_nolock+0x6c/0xa8 clk_core_round_rate_nolock+0x9c/0xa8 clk_core_set_rate_nolock+0x70/0x180 clk_set_rate+0x3c/0x6c of_clk_set_defaults+0x254/0x360 platform_drv_probe+0x28/0xb0 really_probe+0x120/0x2dc driver_probe_device+0x64/0xfc device_driver_attach+0x4c/0x6c __driver_attach+0xac/0xc0 bus_for_each_dev+0x84/0xcc driver_attach+0x2c/0x38 bus_add_driver+0xfc/0x1d0 driver_register+0x64/0xf8 __platform_driver_register+0x4c/0x58 msm_drm_register+0x5c/0x60 ... It turned out that clk_hw_get_parent_by_index() was returning NULL and we weren't checking. Let's check it so that we don't crash. Fixes: ac269395cdd8 ("clk: qcom: Convert to clk_hw based provider APIs") Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4b571eca9cfa@changeid Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()

2020-02-24T07:36:32+00:00

[ Upstream commit 21e157c62eeded8b1558a991b4820b761d48a730 ] The DFS frequency table logic overwrites 'cfg' while detecting the parent clk and then later on in clk_rcg2_dfs_populate_freq() we use that same variable to figure out the mode of the clk, either MND or not. Add a new variable to hold the parent clk bit so that 'cfg' is left untouched for use later. This fixes problems in detecting the supported frequencies for any clks in DFS mode. Fixes: cc4f6944d0e3 ("clk: qcom: Add support for RCG to register for DFS") Reported-by: Rajendra Nayak Signed-off-by: Stephen Boyd Link: https://lkml.kernel.org/r/20200128193329.45635-1-sboyd@kernel.org Tested-by: Rajendra Nayak Signed-off-by: Sasha Levin

clk: qcom: gcc-sdm845: Add missing flag to votable GDSCs

2020-01-23T07:22:27+00:00

commit 5e82548e26ef62e257dc2ff37c11acb5eb72728e upstream. On sdm845 devices, during boot we see the following warnings (unless we have added 'pd_ignore_unused' to the kernel command line): hlos1_vote_mmnoc_mmu_tbu_sf_gdsc status stuck at 'on' hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc status stuck at 'on' hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_tbu2_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_tbu1_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_pcie_tbu_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_audio_tbu_gdsc status stuck at 'on' As the name of these GDSCs suggests, they are "votable" and in downstream DT, they all have the property "qcom,no-status-check-on-disable", which means that we should not poll the status bit when we disable them. Luckily the VOTABLE flag already exists and it does exactly what we need, so let's make use of it to make the warnings disappear. Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845") Reported-by: Rob Clark Signed-off-by: Georgi Djakov Link: https://lkml.kernel.org/r/20191126153437.11808-1-georgi.djakov@linaro.org Tested-by: Rob Clark Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman

clk: qcom: Allow constant ratio freq tables for rcg

2020-01-04T18:17:20+00:00

[ Upstream commit efd164b5520afd6fb2883b68e0d408a7de29c491 ] Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just some constant ratio from the input across the entire frequency range. It would be great if we could specify the frequency table as a single entry constant ratio instead of a long list, ie: { .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 }, { } So, lets support that. We need to fix a corner case in qcom_find_freq() where if the freq table is non-null, but has no frequencies, we end up returning an "entry" before the table array, which is bad. Then, we need ignore the freq from the table, and instead base everything on the requested freq. Suggested-by: Stephen Boyd Signed-off-by: Jeffrey Hugo Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: smd: Add missing pnoc clock

2020-01-04T18:17:19+00:00

[ Upstream commit ba1d366de261981c0dd04fac44d2ce3a5eba2eaa ] When MSM8998 support was added, and analysis was done to determine what clocks would be consumed. That analysis had a flaw, which caused the pnoc to be skipped. The pnoc clock needs to be on to access the uart for the console. The clock is on from boot, but has no consumer votes in the RPM. When we attempt to boot the modem, it causes the RPM to turn off pnoc, which kills our access to the console and causes CPU hangs. We need pnoc to be defined, so that clk_smd_rpm_handoff() will put in an implicit vote for linux and prevent issues when booting modem. Hopefully pnoc can be consumed by the interconnect framework in future so that Linux can rely on explicit votes. Fixes: 6131dc81211c ("clk: qcom: smd: Add support for MSM8998 rpm clocks") Signed-off-by: Jeffrey Hugo Link: https://lkml.kernel.org/r/20191107190615.5656-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2019-09-20T22:45:07+00:00

Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...

Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' into clk-next

2019-09-19T22:31:27+00:00

- Set clk_init_data pointer inside clk_hw to NULL after registration * clk-init-destroy: clk: Overwrite clk_hw::init with NULL during clk_register() clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered clk: ti: Don't reference clk_init_data after registration clk: qcom: Remove error prints from DFS registration rtc: sun6i: Don't reference clk_init_data after registration clk: zx296718: Don't reference clk_init_data after registration clk: milbeaut: Don't reference clk_init_data after registration clk: socfpga: deindent code to proper indentation phy: ti: am654-serdes: Don't reference clk_init_data after registration clk: sprd: Don't reference clk_init_data after registration clk: socfpga: Don't reference clk_init_data after registration clk: sirf: Don't reference clk_init_data after registration clk: qcom: Don't reference clk_init_data after registration clk: meson: axg-audio: Don't reference clk_init_data after registration clk: lochnagar: Don't reference clk_init_data after registration clk: actions: Don't reference clk_init_data after registration * clk-doc: clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h clk: Document of_parse_clkspec() some more clk: Remove extraneous 'for' word in comments * clk-imx: (32 commits) clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: imx: imx8mn: fix audio pll setting clk: imx8mn: Add necessary frequency support for ARM PLL table clk: imx8mn: Add missing rate_count assignment for each PLL structure clk: imx8mn: fix int pll clk gate clk: imx8mn: Add GIC clock clk: imx8mn: Fix incorrect parents clk: imx8mm: Fix incorrect parents clk: imx8mq: Fix sys3 pll references clk: imx8mq: Unregister clks when of_clk_add_provider failed clk: imx8mm: Unregister clks when of_clk_add_provider failed clk: imx8mq: Mark AHB clock as critical clk: imx8mn: Keep uart clocks on for early console clk: imx: Remove unused function statement clk: imx7ulp: Make sure earlycon's clock is enabled clk: imx8mm: Switch to platform driver clk: imx: imx8mm: fix audio pll setting ... * clk-allwinner: clk: sunxi-ng: h6: Allow I2S to change parent rate clk: sunxi-ng: v3s: add Allwinner V3 support clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU clk: sunxi-ng: v3s: add the missing PLL_DDR1