kernel/linux.git/drivers/clk/qcom, branch v5.18.2

clk: qcom: clk-rcg2: fix gfx3d frequency calculation

2022-04-22T02:49:19+00:00

Since the commit 948fb0969eae ("clk: Always clamp the rounded rate"), the clk_core_determine_round_nolock() would clamp the requested rate between min and max rates from the rate request. Normally these fields would be filled by clk_core_get_boundaries() called from clk_round_rate(). However clk_gfx3d_determine_rate() uses a manually crafted rate request, which did not have these fields filled. Thus the requested frequency would be clamped to 0, resulting in weird frequencies being requested from the hardware. Fix this by filling min_rate and max_rate to the values valid for the respective PLLs (0 and ULONG_MAX). Fixes: 948fb0969eae ("clk: Always clamp the rounded rate") Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20220419235447.1586192-1-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson Reported-by: Rob Clark Signed-off-by: Stephen Boyd

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2022-03-30T17:11:04+00:00

Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ...

Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into clk-next

2022-03-29T17:19:36+00:00

- Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...

Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' into clk-next

2022-03-29T17:19:10+00:00

- Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags

clk: qcom: gcc-msm8994: Fix gpll4 width

2022-03-25T00:52:51+00:00

The gpll4 postdiv is actually a div4, so make sure that Linux is aware of this. This fixes the following error messages: mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller") Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org Tested-by: Petr Vorel Reviewed-by: Petr Vorel Signed-off-by: Stephen Boyd

clk: qcom: sm6125-gcc: fix typos in comments

2022-03-15T22:48:38+00:00

Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall Link: https://lore.kernel.org/r/20220314115354.144023-16-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd

clk: qcom: Add display clock controller driver for SM6125

2022-03-09T14:53:30+00:00

Add support for the display clock controller found on SM6125 based devices. This allows display drivers to probe and control their clocks. Signed-off-by: Martin Botka Signed-off-by: Marijn Suijten Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220303131812.302302-4-marijn.suijten@somainline.org

clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig

2022-03-09T14:53:29+00:00

In order to keep at least the list of `CONFIG_SM_` drivers sorted alphabetically, SDX_GCC_65 should have been moved one line up. This in turn makes it easier and cleaner to add the followup SM_DISPCC_6125 driver in the right place, right before SM_DISPCC_8250. Fixes: d79afa201328 ("clk: qcom: Add SDX65 GCC support") Signed-off-by: Marijn Suijten Reviewed-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220303131812.302302-2-marijn.suijten@somainline.org

clk: qcom: gcc: Add emac GDSC support for SM8150

2022-03-09T14:53:29+00:00

Add the EMAC GDSC defines and driver structures for SM8150. Cc: Stephen Boyd Cc: Bjorn Andersson Signed-off-by: Bhupesh Sharma Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220303084824.284946-4-bhupesh.sharma@linaro.org

clk: qcom: gcc: sm8150: Fix some identation issues

2022-03-09T14:53:29+00:00

Fix identation issues with usb30 gdsc structs in gcc-sm8150. Cc: Stephen Boyd Cc: Bjorn Andersson Signed-off-by: Bhupesh Sharma Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220303084824.284946-3-bhupesh.sharma@linaro.org