kernel/linux.git/drivers/clk/qcom, branch v5.10.258

clk: qcom: dispcc-sc7180: Add missing MDSS resets

2026-06-01T15:29:38+00:00

[ Upstream commit b0bc6011c5499bdfddd0390262bfa13dce1eff74 ] The MDSS resets have so far been left undescribed. Fix that. Fixes: dd3d06622138 ("clk: qcom: Add display clock controller driver for SC7180") Signed-off-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Reviewed-by: Taniya Das Tested-by: Val Packett # sc7180-ecs-liva-qc710 Link: https://lore.kernel.org/r/20260120-topic-7180_dispcc_bcr-v1-2-0b1b442156c3@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: dispcc-sm8250: Enable parents for pixel clocks

2026-06-01T15:29:37+00:00

[ Upstream commit acf7a91d0b0e9e3ef374944021de62062125b7e4 ] Add CLK_OPS_PARENT_ENABLE to MDSS pixel clock sources to ensure parent clocks are enabled during clock operations, preventing potential stability issues during display configuration. Fixes: 80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250") Signed-off-by: Val Packett Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260312112321.370983-9-val@packett.cool Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: dispcc-sm8250: Use shared ops on the mdss vsync clk

2026-06-01T15:29:37+00:00

[ Upstream commit 8c522da70f0c2e5148c4c13ccb1c64cca57a6fdb ] mdss_gdsc can get stuck on boot due to RCGs being left on from last boot. As a fix, commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") introduced a callback to ensure the RCG is off upon init. However, the fix depends on all shared RCGs being marked as such in code. For SM8150/SC8180X/SM8250 the MDSS vsync clock was using regular ops, unlike the same clock in the SC7180 code. This was causing display to frequently fail to initialize after rebooting on the Surface Pro X. Fix by using shared ops for this clock. Fixes: 80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250") Signed-off-by: Val Packett Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260312112321.370983-8-val@packett.cool Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: dispcc-sdm845: Enable parents for pixel clocks

2026-03-04T12:19:42+00:00

[ Upstream commit a1d63493634e98360140027fef49d82b1ff0a267 ] Add CLK_OPS_PARENT_ENABLE to MDSS pixel clock sources to ensure parent clocks are enabled during clock operations, preventing potential stability issues during display configuration. Fixes: 81351776c9fb ("clk: qcom: Add display clock controller driver for SDM845") Signed-off-by: Petr Hodina Reviewed-by: Dmitry Baryshkov Reviewed-by: David Heidelberg Link: https://lore.kernel.org/r/20260107-stability-discussion-v2-1-ef7717b435ff@protonmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: dispcc-sdm845: convert to parent data

2026-03-04T12:19:42+00:00

[ Upstream commit 7acd22512907c3afe07cfd759d47a5f8eb8fb04f ] Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210405224743.590029-12-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd Stable-dep-of: a1d63493634e ("clk: qcom: dispcc-sdm845: Enable parents for pixel clocks") Signed-off-by: Sasha Levin

clk: qcom: Return correct error code in qcom_cc_probe_by_index()

2026-03-04T12:19:26+00:00

[ Upstream commit 1e07ebe744fb522983bd52a4a6148601675330c7 ] When devm_platform_ioremap_resource() fails, it returns various error codes. Returning a hardcoded -ENOMEM masks the actual failure reason. Use PTR_ERR() to propagate the actual error code returned by devm_platform_ioremap_resource() instead of -ENOMEM. Fixes: 75e0a1e30191 ("clk: qcom: define probe by index API as common API") Signed-off-by: Haotian Zhang Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20251217041338.2432-1-vulab@iscas.ac.cn Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: gdsc: Set retain_ff before moving to HW CTRL

2025-09-09T16:45:25+00:00

[ Upstream commit 25708f73ff171bb4171950c9f4be5aa8504b8459 ] Enable the retain_ff_enable bit of GDSCR only if the GDSC is already ON. Once the GDSCR moves to HW control, SW no longer can determine the state of the GDSCR and setting the retain_ff bit could destroy all the register contents we intended to save. Therefore, move the retain_ff configuration before switching the GDSC to HW trigger mode. Cc: stable@vger.kernel.org Fixes: 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR") Signed-off-by: Taniya Das Reviewed-by: Imran Shaik Tested-by: Imran Shaik # on QCS8300 Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-1-73e56d68a80f@quicinc.com Signed-off-by: Bjorn Andersson [ Changed error path ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz

2025-06-27T10:04:03+00:00

[ Upstream commit 9e7acf70cf6aa7b22f67d911f50a8cd510e8fb00 ] Fix mclk0 & mclk1 parent map to use correct GPLL6 configuration and freq_tbl to use GPLL6 instead of GPLL0 so that they tick at 24 MHz. Fixes: 1664014e4679 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller") Suggested-by: Stephan Gerhold Reviewed-by: Konrad Dybcio Reviewed-by: Bryan O'Donoghue Signed-off-by: Vincent Knecht Link: https://lore.kernel.org/r/20250414-gcc-msm8939-fixes-mclk-v2-resend2-v2-1-5ddcf572a6de@mailoo.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: clk-rpmh: prevent integer overflow in recalc_rate

2025-03-13T11:47:07+00:00

commit 89aa5925d201b90a48416784831916ca203658f9 upstream. aggr_state and unit fields are u32. The result of their multiplication may not fit in this type. Add explicit casting to prevent overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support") Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Anastasia Belova Link: https://lore.kernel.org/r/20241203084231.6001-1-abelova@astralinux.ru Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman

clk: qcom: clk-alpha-pll: fix alpha mode configuration

2025-03-13T11:47:07+00:00

commit 33f1722eb86e45320a3dd7b3d42f6593a1d595c2 upstream. Commit c45ae598fc16 ("clk: qcom: support for alpha mode configuration") added support for configuring alpha mode, but it seems that the feature was never working in practice. The value of the alpha_{en,mode}_mask members of the configuration gets added to the value parameter passed to the regmap_update_bits() function, however the same values are not getting applied to the bitmask. As the result, the respective bits in the USER_CTL register are never modifed which leads to improper configuration of several PLLs. The following table shows the PLL configurations where the 'alpha_en_mask' member is set and which are passed as a parameter for the clk_alpha_pll_configure() function. In the table the 'expected rate' column shows the rate the PLL should run at with the given configuration, and the 'real rate' column shows the rate the PLL runs at actually. The real rates has been verified on hardwareOn IPQ* platforms, on other platforms, those are computed values only. file pll expected rate real rate dispcc-qcm2290.c disp_cc_pll0 768.0 MHz 768.0 MHz dispcc-sm6115.c disp_cc_pll0 768.0 MHz 768.0 MHz gcc-ipq5018.c ubi32_pll 1000.0 MHz != 984.0 MHz gcc-ipq6018.c nss_crypto_pll 1200.0 MHz 1200.0 MHz gcc-ipq6018.c ubi32_pll 1497.6 MHz != 1488.0 MHz gcc-ipq8074.c nss_crypto_pll 1200.0 MHz != 1190.4 MHz gcc-qcm2290.c gpll11 532.0 MHz != 518.4 MHz gcc-qcm2290.c gpll8 533.2 MHz != 518.4 MHz gcc-qcs404.c gpll3 921.6 MHz 921.6 MHz gcc-sm6115.c gpll11 600.0 MHz != 595.2 MHz gcc-sm6115.c gpll8 800.0 MHz != 787.2 MHz gpucc-sdm660.c gpu_cc_pll0 800.0 MHz != 787.2 MHz gpucc-sdm660.c gpu_cc_pll1 740.0 MHz != 729.6 MHz gpucc-sm6115.c gpu_cc_pll0 1200.0 MHz != 1190.4 MHz gpucc-sm6115.c gpu_cc_pll1 640.0 MHz != 633.6 MHz gpucc-sm6125.c gpu_pll0 1020.0 MHz != 1017.6 MHz gpucc-sm6125.c gpu_pll1 930.0 MHz != 921.6 MHz mmcc-sdm660.c mmpll8 930.0 MHz != 921.6 MHz mmcc-sdm660.c mmpll5 825.0 MHz != 806.4 MHz As it can be seen from the above, there are several PLLs which are configured incorrectly. Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask' values to the bitmask in order to configure the alpha mode correctly. Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed in the table above. Since the 'alpha_mode_mask' is not used by any driver currently, that part of the change causes no functional changes. Cc: stable@vger.kernel.org Fixes: c45ae598fc16 ("clk: qcom: support for alpha mode configuration") Signed-off-by: Gabor Juhos Reviewed-by: Dmitry Baryshkov Tested-by: Gabor Juhos Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman