kernel/linux.git/drivers/clk/qcom, branch v4.14.286

clk: qcom: clk-rcg2: Update the frac table for pixel clock

2022-04-20T07:08:19+00:00

[ Upstream commit b527358cb4cd58a8279c9062b0786f1fab628fdc ] Support the new numerator and denominator for pixel clock on SM8350 and support rgb101010, RGB888 use cases on SM8450. Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks") Signed-off-by: Taniya Das Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220227175536.3131-2-tdas@codeaurora.org Signed-off-by: Sasha Levin

clk: qcom: msm8916: Fix the address location of pll->config_reg

2020-06-25T13:41:47+00:00

[ Upstream commit f47ab3c2f5338828a67e89d5f688d2cef9605245 ] During the process of debugging a processor derived from the msm8916 which we found the new processor was not starting one of its PLLs. After tracing the addresses and writes that downstream was doing and comparing to upstream it became obvious that we were writing to a different register location than downstream when trying to configure the PLL. This error is also present in upstream msm8916. As an example clk-pll.c::clk_pll_recalc_rate wants to write to pll->config_reg updating the bit-field POST_DIV_RATIO. That bit-field is defined in PLL_USER_CTL not in PLL_CONFIG_CTL. Taking the BIMC PLL as an example lm80-p0436-13_c_qc_snapdragon_410_processor_hrd.pdf 0x01823010 GCC_BIMC_PLL_USER_CTL 0x01823014 GCC_BIMC_PLL_CONFIG_CTL This pattern is repeated for gpll0, gpll1, gpll2 and bimc_pll. This error is likely not apparent since the bootloader will already have initialized these PLLs. This patch corrects the location of config_reg from PLL_CONFIG_CTL to PLL_USER_CTL for all relevant PLLs on msm8916. Fixes commit 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support") Cc: Georgi Djakov Cc: Andy Gross Cc: Bjorn Andersson Cc: Michael Turquette Cc: Stephen Boyd Signed-off-by: Bryan O'Donoghue Link: https://lkml.kernel.org/r/20200329124116.4185447-1-bryan.odonoghue@linaro.org Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: rcg: Return failure for RCG update

2020-04-13T08:34:37+00:00

commit 21ea4b62e1f3dc258001a68da98c9663a9dbd6c7 upstream. In case of update config failure, return -EBUSY, so that consumers could handle the failure gracefully. Signed-off-by: Taniya Das Link: https://lkml.kernel.org/r/1557339895-21952-2-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

clk: qcom: rcg2: Don't crash if our parent can't be found; return an error

2020-02-28T15:35:59+00:00

[ Upstream commit 908b050114d8fefdddc57ec9fbc213c3690e7f5f ] When I got my clock parenting slightly wrong I ended up with a crash that looked like this: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... pc : clk_hw_get_rate+0x14/0x44 ... Call trace: clk_hw_get_rate+0x14/0x44 _freq_tbl_determine_rate+0x94/0xfc clk_rcg2_determine_rate+0x2c/0x38 clk_core_determine_round_nolock+0x4c/0x88 clk_core_round_rate_nolock+0x6c/0xa8 clk_core_round_rate_nolock+0x9c/0xa8 clk_core_set_rate_nolock+0x70/0x180 clk_set_rate+0x3c/0x6c of_clk_set_defaults+0x254/0x360 platform_drv_probe+0x28/0xb0 really_probe+0x120/0x2dc driver_probe_device+0x64/0xfc device_driver_attach+0x4c/0x6c __driver_attach+0xac/0xc0 bus_for_each_dev+0x84/0xcc driver_attach+0x2c/0x38 bus_add_driver+0xfc/0x1d0 driver_register+0x64/0xf8 __platform_driver_register+0x4c/0x58 msm_drm_register+0x5c/0x60 ... It turned out that clk_hw_get_parent_by_index() was returning NULL and we weren't checking. Let's check it so that we don't crash. Fixes: ac269395cdd8 ("clk: qcom: Convert to clk_hw based provider APIs") Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4b571eca9cfa@changeid Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: Fix -Wunused-const-variable

2020-01-27T13:46:39+00:00

[ Upstream commit da642427bd7710ec4f4140f693f59aa8521a358c ] Clang produces the following warning drivers/clk/qcom/gcc-msm8996.c:133:32: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map[] = { ^drivers/clk/qcom/gcc-msm8996.c:141:27: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div' [-Wunused-const-variable] static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div[] = { ^ drivers/clk/qcom/gcc-msm8996.c:187:32: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map[] = { ^ drivers/clk/qcom/gcc-msm8996.c:197:27: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div' [-Wunused-const-variable] static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div[] = { It looks like these were never used. Fixes: b1e010c0730a ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver") Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/518 Suggested-by: Nathan Chancellor Signed-off-by: Nathan Huckleberry Reviewed-by: Nathan Chancellor Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: Allow constant ratio freq tables for rcg

2020-01-04T12:59:42+00:00

[ Upstream commit efd164b5520afd6fb2883b68e0d408a7de29c491 ] Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just some constant ratio from the input across the entire frequency range. It would be great if we could specify the frequency table as a single entry constant ratio instead of a long list, ie: { .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 }, { } So, lets support that. We need to fix a corner case in qcom_find_freq() where if the freq table is non-null, but has no frequencies, we end up returning an "entry" before the table array, which is bad. Then, we need ignore the freq from the table, and instead base everything on the requested freq. Suggested-by: Stephen Boyd Signed-off-by: Jeffrey Hugo Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: divider: fix incorrect usage of container_of

2018-04-12T10:32:13+00:00

[ Upstream commit 12a26c298d2a8b1cab498533fa65198e49e3afd3 ] divider_recalc_rate() is an helper function used by clock divider of different types, so the structure containing the 'hw' pointer is not always a 'struct clk_divider' At the following line: > div = _get_div(table, val, flags, divider->width); in several cases, the value of 'divider->width' is garbage as the actual structure behind this memory is not a 'struct clk_divider' Fortunately, this width value is used by _get_val() only when CLK_DIVIDER_MAX_AT_ZERO flag is set. This has never been the case so far when the structure is not a 'struct clk_divider'. This is probably why we did not notice this bug before Fixes: afe76c8fd030 ("clk: allow a clk divider with max divisor when zero") Signed-off-by: Jerome Brunet Acked-by: Alexandre Belloni Acked-by: Sylvain Lemieux Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

clk: qcom: msm8916: fix mnd_width for codec_digcodec

2018-03-19T07:42:52+00:00

[ Upstream commit d8e488e8242ecf129eebc440c92d800a99ca109d ] This patch fixes missing mnd_width for codec_digital clk, this is now set to 8 inline with datasheet. Fixes: 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support") Signed-off-by: Srinivas Kandagatla Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

clk: qcom: common: fix legacy board-clock registration

2017-12-14T08:53:12+00:00

[ Upstream commit 43a51019cc8ff1b1cd2ba72e86563beb40d356fc ] Make sure to search only the child nodes of "/clocks", rather than the whole device-tree depth-first starting at "/clocks" when determining whether to register a fixed clock in the legacy board-clock registration helper. Fixes: ee15faffef11 ("clk: qcom: common: Add API to register board clocks backwards compatibly") Signed-off-by: Johan Hovold Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman