kernel/linux.git/drivers/clk/imx, branch v6.6.133

clk: imx8mp: inform CCF of maximum frequency of clocks

2025-06-04T12:42:03+00:00

[ Upstream commit 06a61b5cb6a8638fa8823cd09b17233b29696fa2 ] The IMX8MPCEC datasheet lists maximum frequencies allowed for different modules. Some of these limits are universal, but some depend on whether the SoC is operating in nominal or in overdrive mode. The imx8mp.dtsi currently assumes overdrive mode and configures some clocks in accordance with this. Boards wishing to make use of nominal mode will need to override some of the clock rates manually. As operating the clocks outside of their allowed range can lead to difficult to debug issues, it makes sense to register the maximum rates allowed in the driver, so the CCF can take them into account. Reviewed-by: Peng Fan Signed-off-by: Ahmad Fatoum Link: https://lore.kernel.org/r/20250218-imx8m-clk-v4-6-b7697dc2dcd0@pengutronix.de Signed-off-by: Abel Vesa Signed-off-by: Sasha Levin

clk: clk-imx8mp-audiomix: fix dsp/ocram_a clock parents

2025-04-10T12:37:31+00:00

[ Upstream commit 91be7d27099dedf813b80702e4ca117d1fb38ce6 ] The DSP and OCRAM_A modules from AUDIOMIX are clocked by AUDIO_AXI_CLK_ROOT, not AUDIO_AHB_CLK_ROOT. Update the clock data accordingly. Fixes: 6cd95f7b151c ("clk: imx: imx8mp: Add audiomix block control") Signed-off-by: Laurentiu Mihalcea Reviewed-by: Iuliana Prodan Reviewed-by: Peng Fan Link: https://lore.kernel.org/r/20250226164513.33822-3-laurentiumihalcea111@gmail.com Signed-off-by: Abel Vesa Signed-off-by: Sasha Levin

clk: imx8mp: Fix clkout1/2 support

2025-02-08T08:51:54+00:00

[ Upstream commit a9b7c84d22fb1687d63ca2a386773015cf59436b ] The CLKOUTn may be fed from PLL1/2/3, but the PLL1/2/3 has to be enabled first by setting PLL_CLKE bit 11 in CCM_ANALOG_SYS_PLLn_GEN_CTRL register. The CCM_ANALOG_SYS_PLLn_GEN_CTRL bit 11 is modeled by plln_out clock. Fix the clock tree and place the clkout1/2 under plln_sel instead of plain plln to let the clock subsystem correctly control the bit 11 and enable the PLL in case the CLKOUTn is supplied by PLL1/2/3. Fixes: 43896f56b59e ("clk: imx8mp: add clkout1/2 support") Signed-off-by: Marek Vasut Reviewed-by: Peng Fan Link: https://lore.kernel.org/r/20241112013718.333771-1-marex@denx.de Signed-off-by: Abel Vesa Signed-off-by: Sasha Levin

clk: imx: imx8-acm: Fix return value check in clk_imx_acm_attach_pm_domains()

2024-12-09T09:32:17+00:00

[ Upstream commit 81a206d736c19139d3863b79e7174f9e98b45499 ] If device_link_add() fails, it returns NULL pointer not ERR_PTR(), replace IS_ERR() with NULL pointer check, and return -EINVAL. Fixes: d3a0946d7ac9 ("clk: imx: imx8: add audio clock mux driver") Signed-off-by: Yang Yingliang Reviewed-by: Peng Fan Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20241026112452.1523-1-yangyingliang@huaweicloud.com Signed-off-by: Abel Vesa Signed-off-by: Sasha Levin

clk: imx: clk-scu: fix clk enable state save and restore

2024-12-09T09:32:17+00:00

[ Upstream commit e81361f6cf9bf4a1848b0813bc4becb2250870b8 ] The scu clk_ops only inplements prepare() and unprepare() callback. Saving the clock state during suspend by checking clk_hw_is_enabled() is not safe as it's possible that some device drivers may only disable the clocks without unprepare. Then the state retention will not work for such clocks. Fixing it by checking clk_hw_is_prepared() which is more reasonable and safe. Fixes: d0409631f466 ("clk: imx: scu: add suspend/resume support") Reviewed-by: Peng Fan Tested-by: Carlos Song Signed-off-by: Dong Aisheng Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-4-89152574d1d7@nxp.com Signed-off-by: Abel Vesa Signed-off-by: Sasha Levin

clk: imx: fracn-gppll: fix pll power up

2024-12-09T09:32:17+00:00

[ Upstream commit ff4279618f0aec350b0fb41b2b35841324fbd96e ] To i.MX93 which features dual Cortex-A55 cores and DSU, when using writel_relaxed to write value to PLL registers, the value might be buffered. To make sure the value has been written into the hardware, using readl to read back the register could achieve the goal. current PLL power up flow can be simplified as below: 1. writel_relaxed to set the PLL POWERUP bit; 2. readl_poll_timeout to check the PLL lock bit: a). timeout = ktime_add_us(ktime_get(), timeout_us); b). readl the pll the lock reg; c). check if the pll lock bit ready d). check if timeout But in some corner cases, both the write in step 1 and read in step 2 will be blocked by other bus transaction in the SoC for a long time, saying the value into real hardware is just before step b). That means the timeout counting has begins for quite sometime since step a), but value still not written into real hardware until bus released just at a point before step b). Then there maybe chances that the pll lock bit is not ready when readl done but the timeout happens. readl_poll_timeout will err return due to timeout. To avoid such unexpected failure, read back the reg to make sure the write has been done in HW reg. So use readl after writel_relaxed to fix the issue. Since we are here, to avoid udelay to run before writel_relaxed, use readl before udelay. Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll") Co-developed-by: Jacky Bai Signed-off-by: Jacky Bai Signed-off-by: Peng Fan Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-3-89152574d1d7@nxp.com Signed-off-by: Abel Vesa Signed-off-by: Sasha Levin

clk: imx: fracn-gppll: correct PLL initialization flow

2024-12-09T09:32:17+00:00

[ Upstream commit 557be501c38e1864b948fc6ccdf4b035d610a2ea ] Per i.MX93 Reference Mannual 22.4 Initialization information 1. Program appropriate value of DIV[ODIV], DIV[RDIV] and DIV[MFI] as per Integer mode. 2. Wait for 5 μs. 3. Program the following field in CTRL register. Set CTRL[POWERUP] to 1'b1 to enable PLL block. 4. Poll PLL_STATUS[PLL_LOCK] register, and wait till PLL_STATUS[PLL_LOCK] is 1'b1 and pll_lock output signal is 1'b1. 5. Set CTRL[CLKMUX_EN] to 1'b1 to enable PLL output clock. So move the CLKMUX_EN operation after PLL locked. Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll") Co-developed-by: Jacky Bai Signed-off-by: Jacky Bai Signed-off-by: Peng Fan Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-2-89152574d1d7@nxp.com Signed-off-by: Abel Vesa Signed-off-by: Sasha Levin

clk: imx: lpcg-scu: SW workaround for errata (e10858)

2024-12-09T09:32:17+00:00

[ Upstream commit 5ee063fac85656bea9cfe3570af147ba1701ba18 ] Back-to-back LPCG writes can be ignored by the LPCG register due to a HW bug. The writes need to be separated by at least 4 cycles of the gated clock. See https://www.nxp.com.cn/docs/en/errata/IMX8_1N94W.pdf The workaround is implemented as follows: 1. For clocks running greater than or equal to 24MHz, a read followed by the write will provide sufficient delay. 2. For clocks running below 24MHz, add a delay of 4 clock cylces after the write to the LPCG register. Fixes: 2f77296d3df9 ("clk: imx: add lpcg clock support") Signed-off-by: Peng Fan Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-1-89152574d1d7@nxp.com Signed-off-by: Abel Vesa Signed-off-by: Sasha Levin

clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D

2024-10-17T13:24:19+00:00

[ Upstream commit a54c441b46a0745683c2eef5a359d22856d27323 ] For i.MX7D DRAM related mux clock, the clock source change should ONLY be done done in low level asm code without accessing DRAM, and then calling clk API to sync the HW clock status with clk tree, it should never touch real clock source switch via clk API, so CLK_SET_PARENT_GATE flag should NOT be added, otherwise, DRAM's clock parent will be disabled when DRAM is active, and system will hang. Signed-off-by: Peng Fan Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20240607133347.3291040-8-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa Signed-off-by: Sasha Levin

clk: imx: imx8qxp: Parent should be initialized earlier than the clock

2024-10-04T14:29:26+00:00

[ Upstream commit 766c386c16c9899461b83573a06380d364c6e261 ] The initialization order of SCU clocks affects the sequence of SCU clock resume. If there are no other effects, the earlier the initialization, the earlier the resume. During SCU clock resume, the clock rate is restored. As SCFW guidelines, configure the parent clock rate before configuring the child rate. Fixes: babfaa9556d7 ("clk: imx: scu: add more scu clocks") Signed-off-by: Peng Fan Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20240607133347.3291040-15-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa Signed-off-by: Sasha Levin