kernel/linux.git/drivers/clk/clk.c, branch v6.3.2

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2023-02-25T23:16:23+00:00

Pull clk updates from Stephen Boyd: "We have one small patch to the clk core this time around. It fixes a corner case with the CLK_OPS_PARENT_ENABLE flag combined with clk_core_is_enabled() where it hangs the system. We'll simply assume the clk is disabled if the parent is disabled and the flag is set. Trying to turn on the parent to check the enable state of the clk runs into system hangs at boot. We let this bake in -next for a couple weeks to make sure there aren't any more issues because the last attempt to fix this ran into hangs and had to be reverted. Note: There were some more patches to the core framework around sync_state and disabling unused clks, but I asked for that to be reverted from the qcom PR because it isn't ready and we're still discussing the best solution on the list. Outside of the core clk framework, we have the usual collection of clk driver updates and support for new SoCs (which seems to never stop). The dirstat is dominated by Qualcomm because they added support for quite a few SoCs this time around and also migrated quite a few of their drivers to clk_parent_data. The other big diff is in the Mediatek clk drivers that saw a significant rework this cycle to similarly modernize the code, and we'll see that work continue in the next cycle as well. Nothing really jumps out as scary here, except that the significant churn in parent data descriptions can have typos that go unnoticed. More details below. Core: - Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() New Drivers: - Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET ref clocks - Support for Mediatek MT7891 SoC clks - Support for many Qualcomm clk controllers: - QDU1000/QRU1000 global clock controller - SA8775P global clock controller - SM8550 TCSR and display clock controller - SM6350 clock controller - MSM8996 CBF and APCS clock controllers Updates: - Various cleanups and improvements to Mediatek clk drivers to reduce code size and modernize the drivers - Support for Versa 5P49V60 clks - Disable R-Car H3 ES1.*, as it was only available to an internal development group and needed a lot of quirks and workarounds - Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and resets on Renesas RZ/V2M - Add display clocks on Renesas R-Car V4H - Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L - Free the imx_uart_clocks even if imx_register_uart_clocks returns early - Get the stdout clocks count from device tree on i.MX - Drop the clock count argument from imx_register_uart_clocks() - Keep the uart clocks on i.MX93 for when earlycon is used - Fix SPDX comment in i.MX6SLL clocks bindings header - Drop some unnecessary spaces from i.MX8ULP clocks bindings header - Add imx_obtain_fixed_of_clock() for allowing to add a clock that is not configured via devicetree - Fix the ENET1 gate configuration for i.MX6UL according to the reference manual - Add ENET refclock mux support for i.MX6UL - Add support for USB host/device configuration on Renesas RZ/N1 - Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car V4H - Add D1 CAN bus gates and resets for Allwinner - Mark D1 CPUX clock as critical on Allwinner - Reuse D1 driver for Allwinner R528/T113 - Cleanup sunxi-ng Kconfig - Fix sunxi-ng kernel-doc issues - Model Allwinner H3/H5 DRAM clock as fixed clock - Use .determine_rate() instead of .round_rate() for the dualdiv, mpll, sclk-div and cpu-dyn-div amlogic clock drivers - DDR clocks were marked as critical in the proper clock driver for each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted in the next releases as it only does clock enablement - Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some of them may use it - Support synchronous power_off requests in the qcom GDSC driver for proper GPU power collapse - Drop test clocks from various Qualcomm clk drivers - Update parent references to use clk_parent_data/clk_hw in various Qualcomm clk drivers - Fixes for the Qualcomm MSM8996 CPU clock controller - Transition Qualcomm MSM8974 GCC off the externally defined sleep_clk - Add GDSCs in the global clock controller for Qualcomm QCS404 - The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops - Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and SDM845 are moved to use the recently introduced properties in the GDSC struct - Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock is added on a variety of platforms - De-duplicate identical clks in Qualcomm SMD RPM clk driver - Add a few missing clocks across msm8998, msm8992, msm8916, qcs404 to Qualcomm SDM RPM clk driver - Various Qualcomm clk drivers use devm_pm_runtime_enable() to simplify" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits) clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP clk: qcom: Revert sync_state based clk_disable_unused clk: imx: pll14xx: fix recalc_rate for negative kdiv clk: rs9: Drop unused pin_xin field MAINTAINERS: clk: imx: Add Peng Fan as reviewer clk: sprd: Add dependency for SPRD_UMS512_CLK clk: ralink: fix 'mt7621_gate_is_enabled()' function clk: mediatek: clk-mtk: Remove unneeded semicolon dt-bindings: clock: remove stih416 bindings dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file clk: imx: fix compile testing imxrt1050 clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static clk: renesas: rcar-gen3: Disable R-Car H3 ES1.* dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include ...

clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()

2023-02-10T23:02:39+00:00

In the previous commits that added CLK_OPS_PARENT_ENABLE, support for this flag was only added to rate change operations (rate setting and reparent) and disabling unused subtree. It was not added to the clock gate related operations. Any hardware driver that needs it for these operations will either see bogus results, or worse, hang. This has been seen on MT8192 and MT8195, where the imp_ii2_* clk drivers set this, but dumping debugfs clk_summary would cause it to hang. Prepare parent on prepare and enable parent on enable dependencies are already handled automatically by the core as part of its sequencing. Whether the case for "enable parent on prepare" should be supported by this flag or not is not clear, and thus ignored for now. This change solely fixes the handling of clk_core_is_enabled, i.e. enabling the parent clock when reading the hardware state. Unfortunately clk_core_is_enabled is called in a variety of places, sometimes with the enable clock already held. To avoid deadlocking, the core will ignore readouts and just return false if CLK_OPS_PARENT_ENABLE is set but the parent isn't currently enabled. Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)") Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)") Signed-off-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20230103092330.494102-1-wenst@chromium.org Tested-by: AngeloGioacchino Del Regno Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Stephen Boyd

cpuidle, clk: Remove trace_.*_rcuidle()

2023-01-13T10:48:17+00:00

OMAP was the one and only user. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Tested-by: Tony Lindgren Tested-by: Ulf Hansson Reviewed-by: Ulf Hansson Acked-by: Rafael J. Wysocki Acked-by: Frederic Weisbecker Acked-by: Stephen Boyd Link: https://lore.kernel.org/r/20230112195541.844982902@infradead.org

Merge branches 'clk-mediatek', 'clk-trace', 'clk-qcom' and 'clk-microchip' into clk-next

2022-12-12T19:13:28+00:00

- Tracepoints for clk_rate_request structures * clk-mediatek: clk: mediatek: fix dependency of MT7986 ADC clocks clk: mediatek: Change PLL register API for MT8186 clk: mediatek: Add new clock driver to handle FHCTL hardware dt-bindings: clock: mediatek: Add new bindings of MediaTek frequency hopping clk: mediatek: Export PLL operations symbols clk: mediatek: mt8186-topckgen: Add GPU clock mux notifier clk: mediatek: mt8186-mfg: Propagate rate changes to parent clk: mediatek: mt8195-topckgen: Drop flags for main/univpll fixed factors clk: mediatek: mt8192: Drop flags for main/univpll fixed factors clk: mediatek: mt6795-topckgen: Drop flags for main/sys/univpll fixed factors clk: mediatek: mt8173: Drop flags for main/sys/univpll fixed factors clk: mediatek: mt8183: Drop flags for sys/univpll fixed factors clk: mediatek: mt8183: Compress top_divs array entries clk: mediatek: mt8186-topckgen: Drop flags for main/univpll fixed factors clk: mediatek: clk-mtk: Allow specifying flags on mtk_fixed_factor clocks * clk-trace: clk: Add trace events for rate requests clk: Store clk_core for clk_rate_request * clk-qcom: (69 commits) clk: qcom: rpmh: add support for SM6350 rpmh IPA clock clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: mmcc-msm8974: move clock parent tables down clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: gcc-msm8974: move clock parent tables down clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974 dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file clk: qcom: gcc-ipq4019: switch to devm_clk_notifier_register clk: qcom: rpmh: remove usage of platform name clk: qcom: rpmh: rename VRM clock data clk: qcom: rpmh: rename ARC clock data clk: qcom: rpmh: support separate symbol name for the RPMH clocks clk: qcom: rpmh: remove platform names from BCM clocks clk: qcom: rpmh: drop all _ao names clk: qcom: rpmh: reuse common duplicate clocks clk: qcom: rpmh: group clock definitions together clk: qcom: rpm: drop the platform from clock definitions clk: qcom: rpm: drop the _clk suffix completely ... * clk-microchip: clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE clk: microchip: check for null return of devm_kzalloc()

clk: Add trace events for rate requests

2022-12-07T21:54:09+00:00

It is currently fairly difficult to follow what clk_rate_request are issued, and how they have been modified once done. Indeed, there's multiple paths that can be taken, some functions are recursive and will just forward the request to its parent, etc. Adding a lot of debug prints is just not very convenient, so let's add trace events for the clock requests, one before they are submitted and one after they are returned. That way we can simply toggle the tracing on without modifying the kernel code and without affecting performances or the kernel logs too much. Reviewed-by: Steven Rostedt (Google) Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20221018-clk-rate-request-tracing-v2-2-5170b363c413@cerno.tech Signed-off-by: Stephen Boyd

clk: Store clk_core for clk_rate_request

2022-12-07T21:54:01+00:00

The struct clk_rate_request is meant to store the context around a rate request such as the parent, boundaries, and so on. However, it doesn't store the clock the rate request is submitted to, which makes debugging difficult. Let's add a pointer to the relevant clk_core instance in order to improve the debugging of rate requests in a subsequent patch. Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20221018-clk-rate-request-tracing-v2-1-5170b363c413@cerno.tech Signed-off-by: Stephen Boyd

clk: Initialize max_rate in struct clk_rate_request

2022-10-28T00:08:41+00:00

Since commit b46fd8dbe8ad ("clk: Zero the clk_rate_request structure"), the clk_core_init_rate_req() function clears the struct clk_rate_request passed as argument. However, the default value for max_rate isn't 0 but ULONG_MAX, and we end up creating a clk_rate_request instance where the maximum rate is 0. Let's initialize max_rate to ULONG_MAX properly. Fixes: b46fd8dbe8ad ("clk: Zero the clk_rate_request structure") Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v1-3-f3ef80518140@cerno.tech Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Stephen Boyd

clk: Initialize the clk_rate_request even if clk_core is NULL

2022-10-28T00:08:29+00:00

Since commit c35e84b09776 ("clk: Introduce clk_hw_init_rate_request()"), users that used to initialize their clk_rate_request by initializing their local structure now rely on clk_hw_init_rate_request(). This function is backed by clk_core_init_rate_req(), which will skip the initialization if either the pointer to struct clk_core or to struct clk_rate_request are NULL. However, the core->parent pointer might be NULL because the clock is orphan, and we will thus end up with our local struct clk_rate_request left untouched. And since clk_hw_init_rate_request() doesn't return an error, we will then call a determine_rate variant with that unitialized structure. In order to avoid this, let's clear our clk_rate_request if the pointer to it is valid but the pointer to struct clk_core isn't. Fixes: c35e84b09776 ("clk: Introduce clk_hw_init_rate_request()") Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v1-2-f3ef80518140@cerno.tech Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Stephen Boyd

clk: Remove WARN_ON NULL parent in clk_core_init_rate_req()

2022-10-28T00:06:50+00:00

If a clock has CLK_SET_RATE_PARENT, but core->parent is NULL (most likely because it's orphan), callers of clk_core_init_rate_req() will blindly call this function leading to a very verbose warning. Since it's a fairly common situation, let's just remove the WARN_ON but keep the check that prevents us from dereferencing the pointer. Interestingly, it fixes a regression on the Mediatek MT8195 where the GPU would stall during a clk_set_rate for its main clock. We couldn't come up with a proper explanation since the condition is essentially the same. It was then assumed that it could be timing related since printing the warning stacktrace takes a while, but we couldn't replicate the failure by using fairly large (10ms) mdelays. Fixes: 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests to the parent") Reported-by: AngeloGioacchino Del Regno Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v1-1-f3ef80518140@cerno.tech Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Stephen Boyd

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2022-10-16T18:08:19+00:00

Pull more clk updates from Stephen Boyd: "This is the final part of the clk patches for this merge window. The clk rate range series needed another week to fully bake. Maxime fixed the bug that broke clk notifiers and prevented this from being included in the first pull request. He also added a unit test on top to make sure it doesn't break so easily again. The majority of the series fixes up how the clk_set_rate_*() APIs work, particularly around when the rate constraints are dropped and how they move around when reparenting clks. Overall it's a much needed improvement to the clk rate range APIs that used to be pretty broken if you looked sideways. Beyond the core changes there are a few driver fixes for a compilation issue or improper data causing clks to fail to register or have the wrong parents. These are good to get in before the first -rc so that the system actually boots on the affected devices" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits) clk: tegra: Fix Tegra PWM parent clock clk: at91: fix the build with binutils 2.27 clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() ...