kernel/linux.git/drivers/clk/clk.c, branch linux-7.1.y

Merge branches 'clk-samsung', 'clk-qcom', 'clk-round', 'clk-sai' and 'clk-cleanup' into clk-next

2026-04-16T17:12:43+00:00

* clk-samsung: clk: samsung: exynos850: Add APM-to-AP mailbox clock dt-bindings: clock: exynos850: Add APM_AP MAILBOX clock clk: samsung: Use %pe format to simplify clk: samsung: pll: Fix possible truncation in a9fraco recalc rate clk: samsung: exynosautov920: add block G3D clock support dt-bindings: clock: exynosautov920: add G3D clock definitions clk: samsung: gs101: harmonise symbol names (clock arrays) clk: samsung: artpec-9: Add initial clock support for ARTPEC-9 SoC clk: samsung: Add clock PLL support for ARTPEC-9 SoC dt-bindings: clock: Add ARTPEC-9 clock controller * clk-qcom: (67 commits) clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC clk: qcom: rpmh: Add support for Nord rpmh clocks clk: qcom: Add TCSR clock driver for Nord SoC dt-bindings: clock: qcom: Add Nord Global Clock Controller dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON clk: qcom: Constify list of critical CBCR registers clk: qcom: Constify qcom_cc_driver_data clk: qcom: videocc-glymur: Constify qcom_cc_desc clk: qcom: Add a driver for SM8750 GPU clocks dt-bindings: clock: qcom: Add SM8750 GPU clocks clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support dt-bindings: clock: qcom: Add CMN PLL support for IPQ8074 clk: qcom: ipq-cmn-pll: Add IPQ6018 SoC support dt-bindings: clock: qcom: Add CMN PLL support for IPQ6018 clk: qcom: gdsc: Fix error path on registration of multiple pm subdomains dt-bindings: clock: qcom: Add missing power-domains property clk: qcom: gcc-eliza: Enable FORCE_MEM_CORE_ON for UFS AXI PHY clock clk: qcom: dispcc-sc7180: Add missing MDSS resets ... * clk-round: clk: divider: remove divider_round_rate() and divider_round_rate_parent() clk: divider: remove divider_ro_round_rate_parent() clk: remove round_rate() clk ops clk: composite: convert from round_rate() to determine_rate() clk: test: remove references to clk_ops.round_rate * clk-sai: clk: fsl-sai: Add MCLK generation support clk: fsl-sai: Extract clock setup into fsl_sai_clk_register() dt-bindings: clock: fsl-sai: Document clock-cells = <1> support clk: fsl-sai: Add i.MX8M support with 8 byte register offset clk: fsl-sai: Sort the headers dt-bindings: clock: fsl-sai: Document i.MX8M support * clk-cleanup: clk: visconti: pll: initialize clk_init_data to zero clk: xgene: Fix mapping leak in xgene_pllclk_init() clk: Simplify clk_is_match() clk: baikal-t1: Remove not-going-to-be-supported code for Baikal SoC clk: mvebu: armada-37xx-periph: fix __iomem casts in structure init clk: qoriq: avoid format string warning

clk: Simplify clk_is_match()

2026-03-24T00:19:12+00:00

Linux style is to handle early-on failure. Inverting the first condition lets us simplify the second, and improves readability. Signed-off-by: Geert Uytterhoeven Reviewed-by: Brian Masney Signed-off-by: Stephen Boyd

clk: remove round_rate() clk ops

2026-02-22T22:38:21+00:00

The round_rate() clk ops is deprecated, and all in tree drivers have been converted, so let's go ahead and remove any references to the round_rate() clk ops. Signed-off-by: Brian Masney

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28+00:00

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook

clk: Use hashtable for global clk lookups

2025-09-21T17:15:43+00:00

A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai Tested-by: Brian Masney Reviewed-by: Brian Masney Signed-off-by: Stephen Boyd

clk: Sort include statements

2025-09-21T17:15:37+00:00

The clk core has its include statements in some random order. Clean it up before we add more. Signed-off-by: Chen-Yu Tsai Reviewed-by: Brian Masney Signed-off-by: Stephen Boyd

clk: add a clk_hw helpers to get the clock device or device_node

2025-06-20T01:25:48+00:00

Add helpers to get the device or device_node associated with clk_hw. This can be used by clock drivers to access various device related functionality such as devres, dev_ prints, etc ... Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20250417-clk-hw-get-helpers-v1-1-7743e509612a@baylibre.com Reviewed-by: Brian Masney Signed-off-by: Stephen Boyd

Merge branches 'clk-parent', 'clk-renesas', 'clk-mediatek' and 'clk-cleanup' into clk-next

2025-03-26T18:26:26+00:00

* clk-parent: clk: check for disabled clock-provider in of_clk_get_hw_from_clkspec() * clk-renesas: (24 commits) clk: renesas: r9a09g047: Add clock and reset signals for the TSU IP clk: renesas: rzv2h: Adjust for CPG_BUS_m_MSTOP starting from m = 1 clk: renesas: r7s9210: Distinguish clocks by clock type clk: renesas: rzg2l: Remove unneeded nullify checks clk: renesas: cpg-mssr: Remove obsolete nullify check clk: renesas: r9a09g057: Add entries for the DMACs clk: renesas: r9a09g047: Add CANFD clocks and resets clk: renesas: r9a09g047: Add CRU0 clocks and resets clk: renesas: rzv2h: Update error message clk: renesas: rzg2l: Update error message clk: renesas: r9a09g047: Add ICU clock/reset clk: renesas: r9a07g043: Fix HP clock source for RZ/Five clk: renesas: r9a09g047: Add SDHI clocks/resets clk: renesas: r8a779h0: Add VSPX clock clk: renesas: r8a779h0: Add FCPVX clock clk: renesas: r8a08g045: Check the source of the CPU PLL settings clk: renesas: r9a09g047: Add WDT clocks and resets clk: renesas: r8a779h0: Add ISP core clocks clk: renesas: r8a779g0: Add ISP core clocks clk: renesas: r8a779a0: Add ISP core clocks ... * clk-mediatek: clk: mediatek: Add SMI LARBs reset for MT8188 dt-bindings: clock: mediatek: Add SMI LARBs reset for MT8188 clk: mediatek: mt8188-vdo1: Add VDO1_DPI1_HDMI clock for hdmitx dt-bindings: clock: mediatek,mt8188: Add VDO1_DPI1_HDMI clock * clk-cleanup: dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles clk: davinci: remove support for da830 dt-bindings: clock: ti: Convert ti-clkctrl.txt to json-schema clk: mmp: Fix NULL vs IS_ERR() check clk: Print an error when clk registration fails clk: Correct the data types of the variables in clk_calc_new_rates clk: imgtec: use %pe for better readability of errors while printing clk: stm32f4: fix an uninitialized variable clk: keystone: syscon-clk: Do not use syscon helper to build regmap

clk: Print an error when clk registration fails

2025-03-04T21:53:48+00:00

We have a lot of driver code that prints an error message when registering a clk fails. Do that in the core function instead to consolidate code. This also helps drivers avoid the anti-pattern of accessing the struct clk_hw::init pointer after registration. Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20250226235408.1339266-1-sboyd@kernel.org