kernel/linux.git/drivers/clk/bcm, branch v5.18.2

clk: bcm2835: fix bcm2835_clock_choose_div

2022-05-17T07:00:34+00:00

The commit 09e3b18ca5de ("clk: bcm2835: Remove unused variable") accidentially breaks the behavior of bcm2835_clock_choose_div() and booting of Raspberry Pi. The removed do_div macro call had side effects, so we need to restore it. Fixes: 09e3b18ca5de ("clk: bcm2835: Remove unused variable") Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20220428183010.1635248-1-stefan.wahren@i2se.com Tested-by: Maxime Ripard Acked-by: Maxime Ripard Signed-off-by: Stephen Boyd

Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into clk-next

2022-03-29T17:19:36+00:00

- Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...

clk: bcm2835: Remove unused variable

2022-03-12T03:22:38+00:00

Since commit 8ca011ef4af4 ("clk: bcm-2835: Remove rounding up the dividers"), the rem variable is still set but no longer used. Remove it. Fixes: 8ca011ef4af4 ("clk: bcm-2835: Remove rounding up the dividers") Reported-by: kernel test robot Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20220222140732.253819-1-maxime@cerno.tech Reviewed-by: Florian Fainelli Signed-off-by: Stephen Boyd

clk: bcm: rpi: Run some clocks at the minimum rate allowed

2022-03-12T03:15:04+00:00

The core clock and M2MC clocks are shared between some devices (Unicam controllers and the HVS, and the HDMI controllers, respectively) that will have various, varying, requirements depending on their current work load. Since those loads can require a fairly high clock rate in extreme conditions (up to ~600MHz), we can end up running those clocks at their maximum frequency even though we no longer require such a high rate. Fortunately, those devices don't require an exact rate but a minimum rate, and all the drivers are using clk_set_min_rate. Thus, we can just rely on the fact that the clk_request minimum (which is the aggregated minimum of all the clock users) is what we want at all times. Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20220225143534.405820-11-maxime@cerno.tech Signed-off-by: Stephen Boyd

clk: bcm: rpi: Set a default minimum rate

2022-03-12T03:15:04+00:00

The M2MC clock provides the state machine clock for both HDMI controllers. However, if no HDMI monitor is plugged in at boot, its clock rate will be left at 0 by the firmware and will make any register access end up in a CPU stall, even though the clock was enabled. We had some code in the HDMI controller to deal with this before, but it makes more sense to have it in the clock driver. Move it there. Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20220225143534.405820-10-maxime@cerno.tech Signed-off-by: Stephen Boyd

clk: bcm: rpi: Add variant structure

2022-03-12T03:15:03+00:00

We only export a bunch of firmware clocks, and some of them require special treatment. This has been do so far using some tests on the clock id in various places, but this is fairly hard to extend and doesn't scale very well. Since we'll need some more cases in the next patches, let's switch to a variant structure that defines the behaviour we need to have for a given clock. Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20220225143534.405820-9-maxime@cerno.tech Signed-off-by: Stephen Boyd

clk: cleanup comments

2022-03-12T02:22:15+00:00

For spdx Space instead of tab before spdx tag Removed repeated works the, to, two Replacements much much to a much 'to to' to 'to do' aready to already Comunications to Communications freqency to frequency Signed-off-by: Tom Rix Link: https://lore.kernel.org/r/20220222195153.3817625-1-trix@redhat.com Signed-off-by: Stephen Boyd

clk: bcm-2835: Remove rounding up the dividers

2021-10-25T13:33:39+00:00

The driver, once it found a divider, tries to round it up by increasing the least significant bit of the fractional part by one when the round_up argument is set and there's a remainder. However, since it increases the divider it will actually reduce the clock rate below what we were asking for, leading to issues with clk_set_min_rate() that will complain that our rounded clock rate is below the minimum of the rate. Since the dividers are fairly precise already, let's remove that part so that we can have clk_set_min_rate() working. This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor"). Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor") Signed-off-by: Maxime Ripard Acked-by: Stephen Boyd Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne # boot and basic functionality Tested-by: Michael Stapelberg Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech

clk: bcm-2835: Pick the closest clock rate

2021-10-25T13:33:39+00:00

The driver currently tries to pick the closest rate that is lower than the rate being requested. This causes an issue with clk_set_min_rate() since it actively checks for the rounded rate to be above the minimum that was just set. Let's change the logic a bit to pick the closest rate to the requested rate, no matter if it's actually higher or lower. Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection") Signed-off-by: Maxime Ripard Acked-by: Stephen Boyd Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne # boot and basic functionality Tested-by: Michael Stapelberg Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech

clk: bcm2835: Switch to clk_divider.determine_rate

2021-08-06T00:36:10+00:00

.determine_rate is meant to replace .round_rate in CCF in the future. Switch over to .determine_rate now that clk_divider_ops has gained support for that. Cc: Marek Szyprowski Cc: Nicolas Saenz Julienne Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-rpi-kernel@lists.infradead.org Signed-off-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20210702225145.2643303-4-martin.blumenstingl@googlemail.com Tested-by: Marek Szyprowski Signed-off-by: Stephen Boyd