kernel/linux.git/drivers/clk/actions, branch v5.15.7

clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoC

2021-06-28T01:45:17+00:00

Add support for the missing NIC and ETHERNET clocks in the Actions Semi Owl S500 SoC clock driver. Additionally, change APB clock parent from AHB to the newly added NIC. Signed-off-by: Cristian Ciocaltea Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/d62e4f1f85c5cef05be14d9e8143e88bbddd2e0f.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd

clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC

2021-06-28T01:45:16+00:00

There are a few issues with the setup of the Actions Semi Owl S500 SoC's clock chain involving AHPPREDIV, H and AHB clocks: * AHBPREDIV clock is defined as a muxer only, although it also acts as a divider. * H clock is using a wrong divider register offset * AHB is defined as a multi-rate factor clock, but it is actually just a fixed pass clock. Let's provide the following fixes: * Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition. * Use the correct register shift value in the OWL_DIVIDER definition for H clock * Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an ungated OWL_COMP_FIXED_FACTOR definition. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea Link: https://lore.kernel.org/r/21c1abd19a7089b65a34852ac6513961be88cbe1.1623354574.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam Signed-off-by: Stephen Boyd

clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC

2021-06-28T01:45:16+00:00

The following clocks of the Actions Semi Owl S500 SoC have been defined to use a shared clock factor table 'bisp_factor_table[]': DE[1-2], VCE, VDE, BISP, SENSOR[0-1] There are several issues involved in this approach: * 'bisp_factor_table[]' describes the configuration of a regular 8-rates divider, so its usage is redundant. Additionally, judging by the BISP clock context, it is incomplete since it maps only 8 out of 12 possible entries. * The clocks mentioned above are not identical in terms of the available rates, therefore cannot rely on the same factor table. Specifically, BISP and SENSOR* are standard 12-rate dividers so their configuration should rely on a proper clock div table, while VCE and VDE require a factor table that is a actually a subset of the one needed for DE[1-2] clocks. Let's fix this by implementing the following: * Add new factor tables 'de_factor_table' and 'hde_factor_table' to properly handle DE[1-2], VCE and VDE clocks. * Add a common div table 'std12rate_div_table' for BISP and SENSOR[0-1] clocks converted to OWL_COMP_DIV. * Drop the now unused 'bisp_factor_table[]'. Additionally, drop the CLK_IGNORE_UNUSED flag for SENSOR[0-1] since there is no reason to always keep ON those clocks. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/e675820a46cd9930d8d576c6cae61d41c1a8416f.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd

clk: actions: Fix SD clocks factor table on Owl S500 SoC

2021-06-28T01:45:16+00:00

Drop the unsupported entries in the factor table used for the SD[0-2] clocks definitions on the Actions Semi Owl S500 SoC. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/196c948d708a22b8198c95f064a0f6b6820f9980.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd

clk: actions: Fix UART clock dividers on Owl S500 SoC

2021-06-28T01:45:16+00:00

Use correct divider registers for the Actions Semi Owl S500 SoC's UART clocks. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/4714d05982b19ac5fec2ed74f54be42d8238e392.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd

clk: actions: Add Actions S500 SoC Reset Management Unit support

2020-07-21T08:50:47+00:00

Add Reset Management Unit (RMU) support for Actions Semi S500 SoC. Signed-off-by: Cristian Ciocaltea Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/3fba2e6f0edfac97cb8c6ce60f95c24852578eac.1593788312.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd

clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC

2020-07-21T08:50:46+00:00

Add support for the missing APB, DMAC and GPIO clocks in the Actions Semi S500 SoC clock driver. Signed-off-by: Cristian Ciocaltea Link: https://lore.kernel.org/r/87964ae012e513597b8b4c7be2e7ac332a70087a.1593788312.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam Signed-off-by: Stephen Boyd

clk: actions: Fix h_clk for Actions S500 SoC

2020-07-21T08:50:46+00:00

The h_clk clock in the Actions Semi S500 SoC clock driver has an invalid parent. Replace with the correct one. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/c57e7ebabfa970014f073b92fe95b47d3e5a70b1.1593788312.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd

Merge branches 'clk-cdce-regulator', 'clk-bcm', 'clk-evict-parent-cache' and 'clk-actions' into clk-next

2019-09-19T22:31:46+00:00

- Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Evict parents from parent cache when they're unregistered * clk-cdce-regulator: clk: clk-cdce925: Add regulator support dt-bindings: clock: cdce925: Add regulator documentation * clk-bcm: clk: bcm2835: Mark PLLD_PER as CRITICAL clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support clk: bcm2835: Introduce SoC specific clock registration dt-bindings: bcm2835-cprman: Add bcm2711 support * clk-evict-parent-cache: clk: Evict unregistered clks from parent caches * clk-actions: clk: actions: Fix factor clk struct member access

clk: actions: Fix factor clk struct member access

2019-09-17T19:54:44+00:00

Since the helper "owl_factor_helper_round_rate" is shared between factor and composite clocks, using the factor clk specific helper function like "hw_to_owl_factor" to access its members will create issues when called from composite clk specific code. Hence, pass the "factor_hw" struct pointer directly instead of fetching it using factor clk specific helpers. This issue has been observed when a composite clock like "sd0_clk" tried to call "owl_factor_helper_round_rate" resulting in pointer dereferencing error. While we are at it, let's rename the "clk_val_best" function to "owl_clk_val_best" since this is an owl SoCs specific helper. Fixes: 4bb78fc9744a ("clk: actions: Add factor clock support") Signed-off-by: Manivannan Sadhasivam Reviewed-by: Stephen Boyd Link: https://lkml.kernel.org/r/20190916154546.24982-2-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd