kernel/linux.git/drivers/char/tpm, branch v6.6.150

tpm: Make the TPM character devices non-seekable

2026-07-24T14:03:38+00:00

commit f20d61c22bcaf172d6790b6500e3838e532e71c8 upstream. The TPM character devices expose a sequential command/response interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE enabled. After a command leaves a response pending, pread(fd, buf, 16, 0x1400) passes 0x1400 as *off to tpm_common_read(). The transfer length is bounded by response_length, but the offset is used unchecked when forming data_buffer + *off. A sufficiently large offset therefore causes an out-of-bounds heap read through copy_to_user() and, if the copy succeeds, an out-of-bounds zero-write through the following memset(). Positional I/O does not provide coherent semantics for this interface. An arbitrary pread offset cannot represent how much of a response has been consumed sequentially. The write callback always stores a command at the start of data_buffer, while pwrite() does not update file->f_pos and can leave the sequential read cursor stale. Call nonseekable_open() from both open handlers. This removes FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to fail with -ESPIPE before reaching the TPM callbacks, and explicitly marks the files non-seekable. Normal read() and write() continue to use the existing sequential f_pos cursor, leaving the response state machine unchanged. Tested on Linux 6.12 with KASAN and a swtpm TPM2 device: - sequential partial reads returned the complete response - pread() and preadv() with offset 0x1400 returned -ESPIPE - pwrite() and pwritev() with offset zero returned -ESPIPE - the pending response remained intact after the rejected operations - a subsequent normal command/response cycle completed normally - no KASAN report was produced. Fixes: 9488585b21be ("tpm: add support for partial reads") Link: https://lore.kernel.org/all/20260710090217.191289-1-yong010301@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Jaewon Yang Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

tpm: fix event_size output in tpm1_binary_bios_measurements_show

2026-07-24T14:03:38+00:00

commit 1a58f6115bfb34eabcc7de8a3a9745b219179781 upstream. Commit 186d124f07da ("tpm_eventlog.c: fix binary_bios_measurements") split the output to write the endian-converted event header first and then the variable-length event data. However, the split was at sizeof(struct tcpa_event) - 1, even though event_data was a zero-length array, and later a flexible array member, both of which already excluded the event data. Therefore, the current code writes the first three bytes of event_size from the endian-converted header and then the last byte from the raw header, which can emit a corrupted event_size on PPC64, where do_endian_conversion() maps to be32_to_cpu(). Split one byte later to write the full endian-converted header first, followed by the variable-length event->event_data. Fixes: 186d124f07da ("tpm_eventlog.c: fix binary_bios_measurements") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Thorsten Blum Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat()

2026-07-24T14:03:37+00:00

commit c0c9cfb3b75def8bf200a2d4db09015806acfeaf upstream. wait_event_interruptible_timeout() evaluates its condition after setting the current task state to TASK_INTERRUPTIBLE. With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait path is used: tpm_tis_status() tpm_tis_spi_read_bytes() tpm_tis_spi_transfer_full() spi_bus_lock() mutex_lock() Address this with the following measures: 1. Call wait_tpm_stat_cond() only while tasking is running. 2. Use wait_woken() to wait for changes. Cc: stable@vger.kernel.org # v4.19+ Cc: Linus Walleij Reported-by: Stefan Wahren Closes: https://lore.kernel.org/linux-integrity/6964bec7-3dbb-453b-89ef-9b990217a8b9@gmx.net/ Fixes: 1a339b658d9d ("tpm_tis_spi: Pass the SPI IRQ down to the driver") Reviewed-by: Linus Walleij Tested-by: Stefan Wahren Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: tpm_tis: stop transmit if retries are exhausted

2026-05-17T15:13:31+00:00

commit 949692da7211572fac419b2986b6abc0cd1aeb76 upstream. tpm_tis_send_main() will attempt to retry sending data TPM_RETRY times. Currently, if those retries are exhausted, the driver will attempt to call execute. The TPM will be in the wrong state, leading to the operation simply timing out. Instead, if there is still an error after retries are exhausted, return that error immediately. Cc: stable@vger.kernel.org # v6.6+ Fixes: 280db21e153d8 ("tpm_tis: Resend command to recover from data transfer errors") Signed-off-by: Jacqueline Wong Signed-off-by: Jordan Hand Link: https://lore.kernel.org/r/20260415160006.2275325-3-jacqwong@google.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: tpm_tis: add error logging for data transfer

2026-05-17T15:13:30+00:00

commit 0471921e2d1043dcc6de5cffb49dd37709521abe upstream. Add logging to more easily determine reason for transmit failure Cc: stable@vger.kernel.org # v6.6+ Fixes: 280db21e153d8 ("tpm_tis: Resend command to recover from data transfer errors") Signed-off-by: Jacqueline Wong Signed-off-by: Jordan Hand Link: https://lore.kernel.org/r/20260415160006.2275325-2-jacqwong@google.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

char: tpm: cr50: Remove IRQF_ONESHOT

2026-03-04T12:20:36+00:00

[ Upstream commit 1affd29ffbd50125a5492c6be1dbb1f04be18d4f ] Passing IRQF_ONESHOT ensures that the interrupt source is masked until the secondary (threaded) handler is done. If only a primary handler is used then the flag makes no sense because the interrupt can not fire (again) while its handler is running. The flag also prevents force-threading of the primary handler and the irq-core will warn about this. Remove IRQF_ONESHOT from irqflags. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Reviewed-by: Jarkko Sakkinen Link: https://patch.msgid.link/20260128095540.863589-10-bigeasy@linutronix.de Signed-off-by: Sasha Levin

tpm: st33zp24: Fix missing cleanup on get_burstcount() error

2026-03-04T12:19:25+00:00

[ Upstream commit 3e91b44c93ad2871f89fc2a98c5e4fe6ca5db3d9 ] get_burstcount() can return -EBUSY on timeout. When this happens, st33zp24_send() returns directly without releasing the locality acquired earlier. Use goto out_err to ensure proper cleanup when get_burstcount() fails. Fixes: bf38b8710892 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)") Signed-off-by: Alper Ak Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failure

2026-03-04T12:19:25+00:00

[ Upstream commit bbd6e97c836cbeb9606d7b7e5dcf8a1d89525713 ] get_burstcount() can return -EBUSY on timeout. When this happens, the function returns directly without releasing the locality that was acquired at the beginning of tpm_tis_i2c_send(). Use goto out_err to ensure proper cleanup when get_burstcount() fails. Fixes: aad628c1d91a ("char/tpm: Add new driver for Infineon I2C TIS TPM") Signed-off-by: Alper Ak Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm: Cap the number of PCR banks

2026-01-11T14:22:20+00:00

commit faf07e611dfa464b201223a7253e9dc5ee0f3c9e upstream. tpm2_get_pcr_allocation() does not cap any upper limit for the number of banks. Cap the limit to eight banks so that out of bounds values coming from external I/O cause on only limited harm. Cc: stable@vger.kernel.org # v5.10+ Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array") Tested-by: Lai Yi Reviewed-by: Jonathan McDowell Reviewed-by: Roberto Sassu Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm_tis: Fix incorrect arguments in tpm_tis_probe_irq_single

2025-10-19T14:30:45+00:00

[ Upstream commit 8a81236f2cb0882c7ea6c621ce357f7f3f601fe5 ] The tpm_tis_write8() call specifies arguments in wrong order. Should be (data, addr, value) not (data, value, addr). The initial correct order was changed during the major refactoring when the code was split. Fixes: 41a5e1cf1fe1 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy") Signed-off-by: Gunnar Kudrjavets Reviewed-by: Justinien Bouron Reviewed-by: Jarkko Sakkinen Reviewed-by: Paul Menzel Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin