kernel/linux.git/drivers/char/tpm, branch v5.10.261

tpm: Make the TPM character devices non-seekable

2026-07-24T13:49:12+00:00

commit f20d61c22bcaf172d6790b6500e3838e532e71c8 upstream. The TPM character devices expose a sequential command/response interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE enabled. After a command leaves a response pending, pread(fd, buf, 16, 0x1400) passes 0x1400 as *off to tpm_common_read(). The transfer length is bounded by response_length, but the offset is used unchecked when forming data_buffer + *off. A sufficiently large offset therefore causes an out-of-bounds heap read through copy_to_user() and, if the copy succeeds, an out-of-bounds zero-write through the following memset(). Positional I/O does not provide coherent semantics for this interface. An arbitrary pread offset cannot represent how much of a response has been consumed sequentially. The write callback always stores a command at the start of data_buffer, while pwrite() does not update file->f_pos and can leave the sequential read cursor stale. Call nonseekable_open() from both open handlers. This removes FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to fail with -ESPIPE before reaching the TPM callbacks, and explicitly marks the files non-seekable. Normal read() and write() continue to use the existing sequential f_pos cursor, leaving the response state machine unchanged. Tested on Linux 6.12 with KASAN and a swtpm TPM2 device: - sequential partial reads returned the complete response - pread() and preadv() with offset 0x1400 returned -ESPIPE - pwrite() and pwritev() with offset zero returned -ESPIPE - the pending response remained intact after the rejected operations - a subsequent normal command/response cycle completed normally - no KASAN report was produced. Fixes: 9488585b21be ("tpm: add support for partial reads") Link: https://lore.kernel.org/all/20260710090217.191289-1-yong010301@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Jaewon Yang Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

tpm: fix event_size output in tpm1_binary_bios_measurements_show

2026-07-24T13:49:12+00:00

commit 1a58f6115bfb34eabcc7de8a3a9745b219179781 upstream. Commit 186d124f07da ("tpm_eventlog.c: fix binary_bios_measurements") split the output to write the endian-converted event header first and then the variable-length event data. However, the split was at sizeof(struct tcpa_event) - 1, even though event_data was a zero-length array, and later a flexible array member, both of which already excluded the event data. Therefore, the current code writes the first three bytes of event_size from the endian-converted header and then the last byte from the raw header, which can emit a corrupted event_size on PPC64, where do_endian_conversion() maps to be32_to_cpu(). Split one byte later to write the full endian-converted header first, followed by the variable-length event->event_data. Fixes: 186d124f07da ("tpm_eventlog.c: fix binary_bios_measurements") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Thorsten Blum Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: tpm_tis: add error logging for data transfer

2026-06-01T15:29:19+00:00

commit 0471921e2d1043dcc6de5cffb49dd37709521abe upstream. Add logging to more easily determine reason for transmit failure Cc: stable@vger.kernel.org # v6.6+ Fixes: 280db21e153d8 ("tpm_tis: Resend command to recover from data transfer errors") Signed-off-by: Jacqueline Wong Signed-off-by: Jordan Hand Link: https://lore.kernel.org/r/20260415160006.2275325-2-jacqwong@google.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: st33zp24: Fix missing cleanup on get_burstcount() error

2026-03-04T12:19:22+00:00

[ Upstream commit 3e91b44c93ad2871f89fc2a98c5e4fe6ca5db3d9 ] get_burstcount() can return -EBUSY on timeout. When this happens, st33zp24_send() returns directly without releasing the locality acquired earlier. Use goto out_err to ensure proper cleanup when get_burstcount() fails. Fixes: bf38b8710892 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)") Signed-off-by: Alper Ak Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failure

2026-03-04T12:19:22+00:00

[ Upstream commit bbd6e97c836cbeb9606d7b7e5dcf8a1d89525713 ] get_burstcount() can return -EBUSY on timeout. When this happens, the function returns directly without releasing the locality that was acquired at the beginning of tpm_tis_i2c_send(). Use goto out_err to ensure proper cleanup when get_burstcount() fails. Fixes: aad628c1d91a ("char/tpm: Add new driver for Infineon I2C TIS TPM") Signed-off-by: Alper Ak Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm: Cap the number of PCR banks

2026-01-19T12:12:03+00:00

[ Upstream commit faf07e611dfa464b201223a7253e9dc5ee0f3c9e ] tpm2_get_pcr_allocation() does not cap any upper limit for the number of banks. Cap the limit to eight banks so that out of bounds values coming from external I/O cause on only limited harm. Cc: stable@vger.kernel.org # v5.10+ Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array") Tested-by: Lai Yi Reviewed-by: Jonathan McDowell Reviewed-by: Roberto Sassu Signed-off-by: Jarkko Sakkinen [ added backward-compatible define for TPM_MAX_DIGEST_SIZE to support older ima_init.c code still using that macro name ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

tpm_tis: Fix incorrect arguments in tpm_tis_probe_irq_single

2025-10-29T13:01:10+00:00

[ Upstream commit 8a81236f2cb0882c7ea6c621ce357f7f3f601fe5 ] The tpm_tis_write8() call specifies arguments in wrong order. Should be (data, addr, value) not (data, value, addr). The initial correct order was changed during the major refactoring when the code was split. Fixes: 41a5e1cf1fe1 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy") Signed-off-by: Gunnar Kudrjavets Reviewed-by: Justinien Bouron Reviewed-by: Jarkko Sakkinen Reviewed-by: Paul Menzel Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm: tis: Double the timeout B to 4s

2025-06-04T12:37:09+00:00

[ Upstream commit 2f661f71fda1fc0c42b7746ca5b7da529eb6b5be ] With some Infineon chips the timeouts in tpm_tis_send_data (both B and C) can reach up to about 2250 ms. Timeout C is retried since commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices") Timeout B still needs to be extended. The problem is most commonly encountered with context related operation such as load context/save context. These are issued directly by the kernel, and there is no retry logic for them. When a filesystem is set up to use the TPM for unlocking the boot fails, and restarting the userspace service is ineffective. This is likely because ignoring a load context/save context result puts the real TPM state and the TPM state expected by the kernel out of sync. Chips known to be affected: tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54) Description: SLB9672 Firmware Revision: 15.22 tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22) Firmware Revision: 7.83 tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16) Firmware Revision: 5.63 Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/ Signed-off-by: Michal Suchanek Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm: Change to kvalloc() in eventlog/acpi.c

2025-03-13T11:47:27+00:00

[ Upstream commit a3a860bc0fd6c07332e4911cf9a238d20de90173 ] The following failure was reported on HPE ProLiant D320: [ 10.693310][ T1] tpm_tis STM0925:00: 2.0 TPM (device-id 0x3, rev-id 0) [ 10.848132][ T1] ------------[ cut here ]------------ [ 10.853559][ T1] WARNING: CPU: 59 PID: 1 at mm/page_alloc.c:4727 __alloc_pages_noprof+0x2ca/0x330 [ 10.862827][ T1] Modules linked in: [ 10.866671][ T1] CPU: 59 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-lp155.2.g52785e2-default #1 openSUSE Tumbleweed (unreleased) 588cd98293a7c9eba9013378d807364c088c9375 [ 10.882741][ T1] Hardware name: HPE ProLiant DL320 Gen12/ProLiant DL320 Gen12, BIOS 1.20 10/28/2024 [ 10.892170][ T1] RIP: 0010:__alloc_pages_noprof+0x2ca/0x330 [ 10.898103][ T1] Code: 24 08 e9 4a fe ff ff e8 34 36 fa ff e9 88 fe ff ff 83 fe 0a 0f 86 b3 fd ff ff 80 3d 01 e7 ce 01 00 75 09 c6 05 f8 e6 ce 01 01 <0f> 0b 45 31 ff e9 e5 fe ff ff f7 c2 00 00 08 00 75 42 89 d9 80 e1 [ 10.917750][ T1] RSP: 0000:ffffb7cf40077980 EFLAGS: 00010246 [ 10.923777][ T1] RAX: 0000000000000000 RBX: 0000000000040cc0 RCX: 0000000000000000 [ 10.931727][ T1] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000040cc0 The above transcript shows that ACPI pointed a 16 MiB buffer for the log events because RSI maps to the 'order' parameter of __alloc_pages_noprof(). Address the bug by moving from devm_kmalloc() to devm_add_action() and kvmalloc() and devm_add_action(). Suggested-by: Ard Biesheuvel Cc: stable@vger.kernel.org # v2.6.16+ Fixes: 55a82ab3181b ("[PATCH] tpm: add bios measurement log") Reported-by: Andy Liang Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219495 Reviewed-by: Ard Biesheuvel Reviewed-by: Stefan Berger Reviewed-by: Takashi Iwai Tested-by: Andy Liang Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm: Use managed allocation for bios event log

2025-03-13T11:47:26+00:00

[ Upstream commit 441b7152729f4a2bdb100135a58625fa0aeb69e4 ] Since the bios event log is freed in the device release function, let devres handle the deallocation. This will allow other memory allocation/mapping functions to be used for the bios event log. Signed-off-by: Eddie James Tested-by: Jarkko Sakkinen Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Stable-dep-of: a3a860bc0fd6 ("tpm: Change to kvalloc() in eventlog/acpi.c") Signed-off-by: Sasha Levin