kernel/linux.git/drivers/char/random.c, branch v4.14.263

random: fix data race on crng init time

2022-01-27T08:00:46+00:00

commit 009ba8568be497c640cab7571f7bfd18345d7b24 upstream. _extract_crng() does plain loads of crng->init_time and crng_global_init_time, which causes undefined behavior if crng_reseed() and RNDRESEEDCRNG modify these corrently. Use READ_ONCE() and WRITE_ONCE() to make the behavior defined. Don't fix the race on crng->init_time by protecting it with crng->lock, since it's not a problem for duplicate reseedings to occur. I.e., the lockless access with READ_ONCE() is fine. Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG") Fixes: e192be9d9a30 ("random: replace non-blocking pool with a Chacha20-based CRNG") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Acked-by: Paul E. McKenney Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: fix data race on crng_node_pool

2022-01-27T08:00:46+00:00

commit 5d73d1e320c3fd94ea15ba5f79301da9a8bcc7de upstream. extract_crng() and crng_backtrack_protect() load crng_node_pool with a plain load, which causes undefined behavior if do_numa_crng_init() modifies it concurrently. Fix this by using READ_ONCE(). Note: as per the previous discussion https://lore.kernel.org/lkml/20211219025139.31085-1-ebiggers@kernel.org/T/#u, READ_ONCE() is believed to be sufficient here, and it was requested that it be used here instead of smp_load_acquire(). Also change do_numa_crng_init() to set crng_node_pool using cmpxchg_release() instead of mb() + cmpxchg(), as the former is sufficient here but is more lightweight. Fixes: 1e7f583af67b ("random: make /dev/urandom scalable for silly userspace programs") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Acked-by: Paul E. McKenney Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: fix the RNDRESEEDCRNG ioctl

2021-03-03T17:22:37+00:00

commit 11a0b5e0ec8c13bef06f7414f9e914506140d5cb upstream. The RNDRESEEDCRNG ioctl reseeds the primary_crng from itself, which doesn't make sense. Reseed it from the input_pool instead. Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG") Cc: stable@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: Andy Lutomirski Cc: Jann Horn Cc: Theodore Ts'o Reviewed-by: Jann Horn Acked-by: Ard Biesheuvel Signed-off-by: Eric Biggers Link: https://lore.kernel.org/r/20210112192818.69921-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman

random32: make prandom_u32() output unpredictable

2020-11-18T17:28:00+00:00

commit c51f8f88d705e06bd696d7510aff22b33eb8e638 upstream. Non-cryptographic PRNGs may have great statistical properties, but are usually trivially predictable to someone who knows the algorithm, given a small sample of their output. An LFSR like prandom_u32() is particularly simple, even if the sample is widely scattered bits. It turns out the network stack uses prandom_u32() for some things like random port numbers which it would prefer are *not* trivially predictable. Predictability led to a practical DNS spoofing attack. Oops. This patch replaces the LFSR with a homebrew cryptographic PRNG based on the SipHash round function, which is in turn seeded with 128 bits of strong random key. (The authors of SipHash have *not* been consulted about this abuse of their algorithm.) Speed is prioritized over security; attacks are rare, while performance is always wanted. Replacing all callers of prandom_u32() is the quick fix. Whether to reinstate a weaker PRNG for uses which can tolerate it is an open question. Commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") was an earlier attempt at a solution. This patch replaces it. Reported-by: Amit Klein Cc: Willy Tarreau Cc: Eric Dumazet Cc: "Jason A. Donenfeld" Cc: Andy Lutomirski Cc: Kees Cook Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Linus Torvalds Cc: tytso@mit.edu Cc: Florian Westphal Cc: Marc Plumb Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: George Spelvin Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ [ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions to prandom.h for later use; merged George's prandom_seed() proposal; inlined siprand_u32(); replaced the net_rand_state[] array with 4 members to fix a build issue; cosmetic cleanups to make checkpatch happy; fixed RANDOM32_SELFTEST build ] [wt: backported to 4.14 -- various context adjustments; timer API change] Signed-off-by: Willy Tarreau Signed-off-by: Greg Kroah-Hartman

random32: update the net random state on interrupt and activity

2020-08-07T07:38:41+00:00

commit f227e3ec3b5cad859ad15666874405e8c1bbc1d4 upstream. This modifies the first 32 bits out of the 128 bits of a random CPU's net_rand_state on interrupt or CPU activity to complicate remote observations that could lead to guessing the network RNG's internal state. Note that depending on some network devices' interrupt rate moderation or binding, this re-seeding might happen on every packet or even almost never. In addition, with NOHZ some CPUs might not even get timer interrupts, leaving their local state rarely updated, while they are running networked processes making use of the random state. For this reason, we also perform this update in update_process_times() in order to at least update the state when there is user or system activity, since it's the only case we care about. Reported-by: Amit Klein Suggested-by: Linus Torvalds Cc: Eric Dumazet Cc: "Jason A. Donenfeld" Cc: Andy Lutomirski Cc: Kees Cook Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Signed-off-by: Willy Tarreau Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

random: always use batched entropy for get_random_u{32,64}

2020-04-13T08:34:32+00:00

commit 69efea712f5b0489e67d07565aad5c94e09a3e52 upstream. It turns out that RDRAND is pretty slow. Comparing these two constructions: for (i = 0; i < CHACHA_BLOCK_SIZE; i += sizeof(ret)) arch_get_random_long(&ret); and long buf[CHACHA_BLOCK_SIZE / sizeof(long)]; extract_crng((u8 *)buf); it amortizes out to 352 cycles per long for the top one and 107 cycles per long for the bottom one, on Coffee Lake Refresh, Intel Core i9-9880H. And importantly, the top one has the drawback of not benefiting from the real rng, whereas the bottom one has all the nice benefits of using our own chacha rng. As get_random_u{32,64} gets used in more places (perhaps beyond what it was originally intended for when it was introduced as get_random_{int,long} back in the md5 monstrosity era), it seems like it might be a good thing to strengthen its posture a tiny bit. Doing this should only be stronger and not any weaker because that pool is already initialized with a bunch of rdrand data (when available). This way, we get the benefits of the hardware rng as well as our own rng. Another benefit of this is that we no longer hit pitfalls of the recent stream of AMD bugs in RDRAND. One often used code pattern for various things is: do { val = get_random_u32(); } while (hash_table_contains_key(val)); That recent AMD bug rendered that pattern useless, whereas we're really very certain that chacha20 output will give pretty distributed numbers, no matter what. So, this simplification seems better both from a security perspective and from a performance perspective. Signed-off-by: Jason A. Donenfeld Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20200221201037.30231-1-Jason@zx2c4.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

Revert "char/random: silence a lockdep splat with printk()"

2020-03-11T17:02:55+00:00

This reverts commit 28820c5802f9f83c655ab09ccae8289103ce1490 which is commit 1b710b1b10eff9d46666064ea25f079f70bc67a8 upstream. It causes problems here just like it did in 4.19.y and odds are it will be reverted upstream as well. Reported-by: Guenter Roeck Cc: Sergey Senozhatsky Cc: Qian Cai Cc: Theodore Ts'o Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman

char/random: silence a lockdep splat with printk()

2020-02-28T15:35:56+00:00

[ Upstream commit 1b710b1b10eff9d46666064ea25f079f70bc67a8 ] Sergey didn't like the locking order, uart_port->lock -> tty_port->lock uart_write (uart_port->lock) __uart_start pl011_start_tx pl011_tx_chars uart_write_wakeup tty_port_tty_wakeup tty_port_default tty_port_tty_get (tty_port->lock) but those code is so old, and I have no clue how to de-couple it after checking other locks in the splat. There is an onging effort to make all printk() as deferred, so until that happens, workaround it for now as a short-term fix. LTP: starting iogen01 (export LTPROOT; rwtest -N iogen01 -i 120s -s read,write -Da -Dv -n 2 500b:$TMPDIR/doio.f1.$$ 1000b:$TMPDIR/doio.f2.$$) WARNING: possible circular locking dependency detected ------------------------------------------------------ doio/49441 is trying to acquire lock: ffff008b7cff7290 (&(&zone->lock)->rlock){..-.}, at: rmqueue+0x138/0x2050 but task is already holding lock: 60ff000822352818 (&pool->lock/1){-.-.}, at: start_flush_work+0xd8/0x3f0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&pool->lock/1){-.-.}: lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 __queue_work+0x4b4/0xa10 queue_work_on+0xac/0x11c tty_schedule_flip+0x84/0xbc tty_flip_buffer_push+0x1c/0x28 pty_write+0x98/0xd0 n_tty_write+0x450/0x60c tty_write+0x338/0x474 __vfs_write+0x88/0x214 vfs_write+0x12c/0x1a4 redirected_tty_write+0x90/0xdc do_loop_readv_writev+0x140/0x180 do_iter_write+0xe0/0x10c vfs_writev+0x134/0x1cc do_writev+0xbc/0x130 __arm64_sys_writev+0x58/0x8c el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 -> #3 (&(&port->lock)->rlock){-.-.}: lock_acquire+0x320/0x360 _raw_spin_lock_irqsave+0x7c/0x9c tty_port_tty_get+0x24/0x60 tty_port_default_wakeup+0x1c/0x3c tty_port_tty_wakeup+0x34/0x40 uart_write_wakeup+0x28/0x44 pl011_tx_chars+0x1b8/0x270 pl011_start_tx+0x24/0x70 __uart_start+0x5c/0x68 uart_write+0x164/0x1c8 do_output_char+0x33c/0x348 n_tty_write+0x4bc/0x60c tty_write+0x338/0x474 redirected_tty_write+0xc0/0xdc do_loop_readv_writev+0x140/0x180 do_iter_write+0xe0/0x10c vfs_writev+0x134/0x1cc do_writev+0xbc/0x130 __arm64_sys_writev+0x58/0x8c el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 -> #2 (&port_lock_key){-.-.}: lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 pl011_console_write+0xec/0x2cc console_unlock+0x794/0x96c vprintk_emit+0x260/0x31c vprintk_default+0x54/0x7c vprintk_func+0x218/0x254 printk+0x7c/0xa4 register_console+0x734/0x7b0 uart_add_one_port+0x734/0x834 pl011_register_port+0x6c/0xac sbsa_uart_probe+0x234/0x2ec platform_drv_probe+0xd4/0x124 really_probe+0x250/0x71c driver_probe_device+0xb4/0x200 __device_attach_driver+0xd8/0x188 bus_for_each_drv+0xbc/0x110 __device_attach+0x120/0x220 device_initial_probe+0x20/0x2c bus_probe_device+0x54/0x100 device_add+0xae8/0xc2c platform_device_add+0x278/0x3b8 platform_device_register_full+0x238/0x2ac acpi_create_platform_device+0x2dc/0x3a8 acpi_bus_attach+0x390/0x3cc acpi_bus_attach+0x108/0x3cc acpi_bus_attach+0x108/0x3cc acpi_bus_attach+0x108/0x3cc acpi_bus_scan+0x7c/0xb0 acpi_scan_init+0xe4/0x304 acpi_init+0x100/0x114 do_one_initcall+0x348/0x6a0 do_initcall_level+0x190/0x1fc do_basic_setup+0x34/0x4c kernel_init_freeable+0x19c/0x260 kernel_init+0x18/0x338 ret_from_fork+0x10/0x18 -> #1 (console_owner){-...}: lock_acquire+0x320/0x360 console_lock_spinning_enable+0x6c/0x7c console_unlock+0x4f8/0x96c vprintk_emit+0x260/0x31c vprintk_default+0x54/0x7c vprintk_func+0x218/0x254 printk+0x7c/0xa4 get_random_u64+0x1c4/0x1dc shuffle_pick_tail+0x40/0xac __free_one_page+0x424/0x710 free_one_page+0x70/0x120 __free_pages_ok+0x61c/0xa94 __free_pages_core+0x1bc/0x294 memblock_free_pages+0x38/0x48 __free_pages_memory+0xcc/0xfc __free_memory_core+0x70/0x78 free_low_memory_core_early+0x148/0x18c memblock_free_all+0x18/0x54 mem_init+0xb4/0x17c mm_init+0x14/0x38 start_kernel+0x19c/0x530 -> #0 (&(&zone->lock)->rlock){..-.}: validate_chain+0xf6c/0x2e2c __lock_acquire+0x868/0xc2c lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 rmqueue+0x138/0x2050 get_page_from_freelist+0x474/0x688 __alloc_pages_nodemask+0x3b4/0x18dc alloc_pages_current+0xd0/0xe0 alloc_slab_page+0x2b4/0x5e0 new_slab+0xc8/0x6bc ___slab_alloc+0x3b8/0x640 kmem_cache_alloc+0x4b4/0x588 __debug_object_init+0x778/0x8b4 debug_object_init_on_stack+0x40/0x50 start_flush_work+0x16c/0x3f0 __flush_work+0xb8/0x124 flush_work+0x20/0x30 xlog_cil_force_lsn+0x88/0x204 [xfs] xfs_log_force_lsn+0x128/0x1b8 [xfs] xfs_file_fsync+0x3c4/0x488 [xfs] vfs_fsync_range+0xb0/0xd0 generic_write_sync+0x80/0xa0 [xfs] xfs_file_buffered_aio_write+0x66c/0x6e4 [xfs] xfs_file_write_iter+0x1a0/0x218 [xfs] __vfs_write+0x1cc/0x214 vfs_write+0x12c/0x1a4 ksys_write+0xb0/0x120 __arm64_sys_write+0x54/0x88 el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 other info that might help us debug this: Chain exists of: &(&zone->lock)->rlock --> &(&port->lock)->rlock --> &pool->lock/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pool->lock/1); lock(&(&port->lock)->rlock); lock(&pool->lock/1); lock(&(&zone->lock)->rlock); *** DEADLOCK *** 4 locks held by doio/49441: #0: a0ff00886fc27408 (sb_writers#8){.+.+}, at: vfs_write+0x118/0x1a4 #1: 8fff00080810dfe0 (&xfs_nondir_ilock_class){++++}, at: xfs_ilock+0x2a8/0x300 [xfs] #2: ffff9000129f2390 (rcu_read_lock){....}, at: rcu_lock_acquire+0x8/0x38 #3: 60ff000822352818 (&pool->lock/1){-.-.}, at: start_flush_work+0xd8/0x3f0 stack backtrace: CPU: 48 PID: 49441 Comm: doio Tainted: G W Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019 Call trace: dump_backtrace+0x0/0x248 show_stack+0x20/0x2c dump_stack+0xe8/0x150 print_circular_bug+0x368/0x380 check_noncircular+0x28c/0x294 validate_chain+0xf6c/0x2e2c __lock_acquire+0x868/0xc2c lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 rmqueue+0x138/0x2050 get_page_from_freelist+0x474/0x688 __alloc_pages_nodemask+0x3b4/0x18dc alloc_pages_current+0xd0/0xe0 alloc_slab_page+0x2b4/0x5e0 new_slab+0xc8/0x6bc ___slab_alloc+0x3b8/0x640 kmem_cache_alloc+0x4b4/0x588 __debug_object_init+0x778/0x8b4 debug_object_init_on_stack+0x40/0x50 start_flush_work+0x16c/0x3f0 __flush_work+0xb8/0x124 flush_work+0x20/0x30 xlog_cil_force_lsn+0x88/0x204 [xfs] xfs_log_force_lsn+0x128/0x1b8 [xfs] xfs_file_fsync+0x3c4/0x488 [xfs] vfs_fsync_range+0xb0/0xd0 generic_write_sync+0x80/0xa0 [xfs] xfs_file_buffered_aio_write+0x66c/0x6e4 [xfs] xfs_file_write_iter+0x1a0/0x218 [xfs] __vfs_write+0x1cc/0x214 vfs_write+0x12c/0x1a4 ksys_write+0xb0/0x120 __arm64_sys_write+0x54/0x88 el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 Reviewed-by: Sergey Senozhatsky Signed-off-by: Qian Cai Link: https://lore.kernel.org/r/1573679785-21068-1-git-send-email-cai@lca.pw Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin

random: add a spinlock_t to struct batched_entropy

2019-05-31T13:47:25+00:00

[ Upstream commit b7d5dc21072cda7124d13eae2aefb7343ef94197 ] The per-CPU variable batched_entropy_uXX is protected by get_cpu_var(). This is just a preempt_disable() which ensures that the variable is only from the local CPU. It does not protect against users on the same CPU from another context. It is possible that a preemptible context reads slot 0 and then an interrupt occurs and the same value is read again. The above scenario is confirmed by lockdep if we add a spinlock: | ================================ | WARNING: inconsistent lock state | 5.1.0-rc3+ #42 Not tainted | -------------------------------- | inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. | ksoftirqd/9/56 [HC0[0]:SC1[1]:HE0:SE0] takes: | (____ptrval____) (batched_entropy_u32.lock){+.?.}, at: get_random_u32+0x3e/0xe0 | {SOFTIRQ-ON-W} state was registered at: | _raw_spin_lock+0x2a/0x40 | get_random_u32+0x3e/0xe0 | new_slab+0x15c/0x7b0 | ___slab_alloc+0x492/0x620 | __slab_alloc.isra.73+0x53/0xa0 | kmem_cache_alloc_node+0xaf/0x2a0 | copy_process.part.41+0x1e1/0x2370 | _do_fork+0xdb/0x6d0 | kernel_thread+0x20/0x30 | kthreadd+0x1ba/0x220 | ret_from_fork+0x3a/0x50 … | other info that might help us debug this: | Possible unsafe locking scenario: | | CPU0 | ---- | lock(batched_entropy_u32.lock); | | lock(batched_entropy_u32.lock); | | *** DEADLOCK *** | | stack backtrace: | Call Trace: … | kmem_cache_alloc_trace+0x20e/0x270 | ipmi_alloc_recv_msg+0x16/0x40 … | __do_softirq+0xec/0x48d | run_ksoftirqd+0x37/0x60 | smpboot_thread_fn+0x191/0x290 | kthread+0xfe/0x130 | ret_from_fork+0x3a/0x50 Add a spinlock_t to the batched_entropy data structure and acquire the lock while accessing it. Acquire the lock with disabled interrupts because this function may be used from interrupt context. Remove the batched_entropy_reset_lock lock. Now that we have a lock for the data scructure, we can access it from a remote CPU. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin

random: mix rdrand with entropy sent in from userspace

2018-08-03T05:50:42+00:00

commit 81e69df38e2911b642ec121dec319fad2a4782f3 upstream. Fedora has integrated the jitter entropy daemon to work around slow boot problems, especially on VM's that don't support virtio-rng: https://bugzilla.redhat.com/show_bug.cgi?id=1572944 It's understandable why they did this, but the Jitter entropy daemon works fundamentally on the principle: "the CPU microarchitecture is **so** complicated and we can't figure it out, so it *must* be random". Yes, it uses statistical tests to "prove" it is secure, but AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with flying colors. So if RDRAND is available, mix it into entropy submitted from userspace. It can't hurt, and if you believe the NSA has backdoored RDRAND, then they probably have enough details about the Intel microarchitecture that they can reverse engineer how the Jitter entropy daemon affects the microarchitecture, and attack its output stream. And if RDRAND is in fact an honest DRNG, it will immeasurably improve on what the Jitter entropy daemon might produce. This also provides some protection against someone who is able to read or set the entropy seed file. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman