kernel/linux.git/drivers/cdrom/cdrom.c, branch v5.15.7

scsi: sr: cdrom: Move cdrom_read_cdda_bpc() into the sr driver

2021-07-31T02:13:09+00:00

cdrom_read_cdda_bpc() relies on sending SCSI command to the low level driver using a REQ_OP_SCSI_IN request. This isn't generic block layer functionality, so move the actual low-level code into the sr driver and call it through a new read_cdda_bpc method in the cdrom_device_ops structure. With this the CDROM code does not have to pull in scsi_normalize_sense() and depend on CONFIG_SCSI_COMMON. Link: https://lore.kernel.org/r/20210730072752.GB23847%40lst.de Tested-by: Anders Roxell Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: cdrom: Remove the call to scsi_cmd_blk_ioctl() from cdrom_ioctl()

2021-07-29T02:24:25+00:00

Only the sr driver can handle SCSI passthrough requests, so move the call to scsi_cmd_blk_ioctl() there. Link: https://lore.kernel.org/r/20210724072033.1284840-9-hch@lst.de Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

block: remove REQ_OP_SCSI_{IN,OUT}

2021-06-30T21:34:19+00:00

With the legacy IDE driver gone drivers now use either REQ_OP_DRV_* or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests into a single one. Reviewed-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

block: remove unnecessary argument from blk_execute_rq

2021-01-25T04:52:39+00:00

We can remove 'q' from blk_execute_rq as well after the previous change in blk_execute_rq_nowait. And more importantly it never really was needed to start with given that we can trivial derive it from struct request. Cc: linux-scsi@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: linux-ide@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: linux-nfs@vger.kernel.org Acked-by: Ulf Hansson # for mmc Signed-off-by: Guoqing Jiang Signed-off-by: Jens Axboe

cdrom: Reset sector_size back it is not 2048.

2020-12-12T18:12:25+00:00

In v2.4.0-test2pre2 mmc_ioctl_cdrom_read_data() was extended by issuing a MODE_SELECT opcode to change the sector size and READ_10 to perform the actual read if the READ_CD opcode is not support. The sector size is never changed back to the previous value of 2048 bytes which is however denoted by the comment for version 3.09 of the cdrom.c file. Use cdrom_switch_blocksize() to change the sector size only if the requested size deviates from 2048. Change it back to 2048 after the read operation if a change was mode. Link: https://lkml.kernel.org/r/20201204164803.ovwurzs3257em2rp@linutronix.de Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Jens Axboe

cdrom: remove the unused cdrom_media_changed function

2020-07-08T22:20:01+00:00

As well as the ->media_changed method. All these are left over from before the drivers were switched over to the check_events scheme. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

Merge branch 'work.sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2020-06-10T23:05:54+00:00

Pull sysctl fixes from Al Viro: "Fixups to regressions in sysctl series" * 'work.sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sysctl: reject gigantic reads/write to sysctl files cdrom: fix an incorrect __user annotation on cdrom_sysctl_info trace: fix an incorrect __user annotation on stack_trace_sysctl random: fix an incorrect __user annotation on proc_do_entropy net/sysctl: remove leftover __user annotations on neigh_proc_dointvec* net/sysctl: use cpumask_parse in flow_limit_cpu_sysctl

cdrom: fix an incorrect __user annotation on cdrom_sysctl_info

2020-06-10T18:11:33+00:00

No user pointers for sysctls anymore. Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Reported-by: build test robot Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18+00:00

Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...

cdrom: factor out a cdrom_multisession helper

2020-05-04T16:13:42+00:00

Factor out a version of the CDROMMULTISESSION ioctl handler that can be called directly from kernel space. Signed-off-by: Christoph Hellwig Reviewed-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Jens Axboe