kernel/linux.git/drivers/bus, branch v5.10.268

bus: sunxi-rsb: Always check register address validity

2026-07-24T13:48:56+00:00

[ Upstream commit 61192938a5870ac36edae81e4775b680dcf02c61 ] The register address was already validated for read operations in regmap_sunxi_rsb_reg_read before being truncated to a u8. Write operations have the same set of possible addresses, and the address is being truncated from u32 to u8 here as well, so the same check is needed. Signed-off-by: Samuel Holland Signed-off-by: Andrey Skvortsov Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Reviewed-by: Chen-Yu Tsai Reviewed-by: Jernej Skrabec Link: https://patch.msgid.link/20260301144939.1832806-1-andrej.skvortzov@gmail.com Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin

bus: mhi: host: Add alignment check for event ring read pointer

2026-07-24T13:48:46+00:00

commit eff9704f5332a13b08fbdbe0f84059c9e7051d5f upstream. Though we do check the event ring read pointer by "is_valid_ring_ptr" to make sure it is in the buffer range, but there is another risk the pointer may be not aligned. Since we are expecting event ring elements are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer could lead to multiple issues like DoS or ring buffer memory corruption. So add a alignment check for event ring read pointer. Fixes: ec32332df764 ("bus: mhi: core: Sanity check values from remote device before use") cc: stable@vger.kernel.org Signed-off-by: Krishna chaitanya chundru Reviewed-by: Jeffrey Hugo Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20231031-alignment_check-v2-1-1441db7c5efd@quicinc.com Signed-off-by: Manivannan Sadhasivam Signed-off-by: Alexander Martyniuk Signed-off-by: Greg Kroah-Hartman

bus: fsl-mc: fix an error handling in fsl_mc_device_add()

2026-03-04T12:20:19+00:00

[ Upstream commit 52f527d0916bcdd7621a0c9e7e599b133294d495 ] In fsl_mc_device_add(), device_initialize() is called first. put_device() should be called to drop the reference if error occurs. And other resources would be released via put_device -> fsl_mc_device_release. So remove redundant kfree() in error handling path. Fixes: bbf9d17d9875 ("staging: fsl-mc: Freescale Management Complex (fsl-mc) bus driver") Cc: stable@vger.kernel.org Reported-by: Dan Carpenter Closes: https://lore.kernel.org/all/b767348e-d89c-416e-acea-1ebbff3bea20@stanley.mountain/ Signed-off-by: Su Hui Suggested-by: Christophe Leroy (CS GROUP) Signed-off-by: Haoxiang Li Reviewed-by: Ioana Ciornei Link: https://lore.kernel.org/r/20260124102054.1613093-1-lihaoxiang@isrc.iscas.ac.cn Signed-off-by: Christophe Leroy (CS GROUP) Signed-off-by: Sasha Levin

bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove()

2026-01-19T12:12:06+00:00

commit 928ea98252ad75118950941683893cf904541da9 upstream. In fsl_mc_bus_remove(), mc->root_mc_bus_dev->mc_io is passed to fsl_destroy_mc_io(). However, mc->root_mc_bus_dev is already freed in fsl_mc_device_remove(). Then reference to mc->root_mc_bus_dev->mc_io triggers KASAN use-after-free. To avoid the use-after-free, keep the reference to mc->root_mc_bus_dev->mc_io in a local variable and pass to fsl_destroy_mc_io(). This patch needs rework to apply to kernels older than v5.15. Fixes: f93627146f0e ("staging: fsl-mc: fix asymmetry in destroy of mc_io") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Shin'ichiro Kawasaki Link: https://lore.kernel.org/r/20220601105159.87752-1-shinichiro.kawasaki@wdc.com Signed-off-by: Greg Kroah-Hartman [ Keerthana: Backported the patch to v5.10.y ] Signed-off-by: Keerthana K Signed-off-by: Greg Kroah-Hartman

ti-sysc: allow OMAP2 and OMAP4 timers to be reserved on AM33xx

2026-01-19T12:11:46+00:00

[ Upstream commit 3f61783920504b2cf99330b372d82914bb004d8e ] am33xx.dtsi has the same clock setup as am35xx.dtsi, setting ti,no-reset-on-init and ti,no-idle on timer1_target and timer2_target, so AM33 needs the same workaround as AM35 to avoid ti-sysc probe failing on certain target modules. Signed-off-by: Matthias Schiffer Signed-off-by: Alexander Stein Link: https://lore.kernel.org/r/20250825131114.2206804-1-alexander.stein@ew.tq-group.com Signed-off-by: Kevin Hilman Signed-off-by: Sasha Levin

bus: mhi: host: Do not use uninitialized 'dev' pointer in mhi_init_irq_setup()

2025-10-29T13:01:18+00:00

[ Upstream commit d0856a6dff57f95cc5d2d74e50880f01697d0cc4 ] In mhi_init_irq_setup, the device pointer used for dev_err() was not initialized. Use the pointer from mhi_cntrl instead. Fixes: b0fc0167f254 ("bus: mhi: core: Allow shared IRQ for event rings") Fixes: 3000f85b8f47 ("bus: mhi: core: Add support for basic PM operations") Signed-off-by: Adam Xue [mani: reworded subject/description and CCed stable] Signed-off-by: Manivannan Sadhasivam Reviewed-by: Krishna Chaitanya Chundru Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250905174118.38512-1-zxue@semtech.com [ Adjust context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

bus: fsl-mc: Check return value of platform_get_resource()

2025-10-29T13:01:08+00:00

commit 25f526507b8ccc6ac3a43bc094d09b1f9b0b90ae upstream. platform_get_resource() returns NULL in case of failure, so check its return value and propagate the error in order to prevent NULL pointer dereference. Fixes: 6305166c8771 ("bus: fsl-mc: Add ACPI support for fsl-mc") Cc: stable@vger.kernel.org Signed-off-by: Salah Triki Acked-by: Ioana Ciornei Link: https://lore.kernel.org/r/aKwuK6TRr5XNYQ8u@pc Signed-off-by: Christophe Leroy Signed-off-by: Greg Kroah-Hartman

bus: mhi: host: Fix endianness of BHI vector table

2025-08-28T14:22:49+00:00

commit f471578e8b1a90623674433a01a8845110bc76ce upstream. On big endian platform like PowerPC, the MHI bus (which is little endian) does not start properly. The following example shows the error messages by using QCN9274 WLAN device with ath12k driver: ath12k_pci 0001:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit] ath12k_pci 0001:01:00.0: MSI vectors: 1 ath12k_pci 0001:01:00.0: Hardware name: qcn9274 hw2.0 ath12k_pci 0001:01:00.0: failed to set mhi state: POWER_ON(2) ath12k_pci 0001:01:00.0: failed to start mhi: -110 ath12k_pci 0001:01:00.0: failed to power up :-110 ath12k_pci 0001:01:00.0: failed to create soc core: -110 ath12k_pci 0001:01:00.0: failed to init core: -110 ath12k_pci: probe of 0001:01:00.0 failed with error -110 The issue seems to be with the incorrect DMA address/size used for transferring the firmware image over BHI. So fix it by converting the DMA address and size of the BHI vector table to little endian format before sending them to the device. Fixes: 6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells") Signed-off-by: Alexander Wilhelm [mani: added stable tag and reworded commit message] Signed-off-by: Manivannan Sadhasivam Reviewed-by: Jeff Hugo Reviewed-by: Krishna Chaitanya Chundru Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250519145837.958153-1-alexander.wilhelm@westermo.com Signed-off-by: Greg Kroah-Hartman

Revert "bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first"

2025-06-27T10:04:19+00:00

[ Upstream commit 36305857b1ead8f6ca033a913162ebc09bee0b43 ] This reverts commit 4700a00755fb5a4bb5109128297d6fd2d1272ee6. It breaks target-module@2b300050 ("ti,sysc-omap2") probe on AM62x in a case when minimally-configured system tries to network-boot: [ 6.888776] probe of 2b300050.target-module returned 517 after 258 usecs [ 17.129637] probe of 2b300050.target-module returned 517 after 708 usecs [ 17.137397] platform 2b300050.target-module: deferred probe pending: (reason unknown) [ 26.878471] Waiting up to 100 more seconds for network. There are minimal configurations possible when the deferred device is not being probed any more (because everything else has been successfully probed) and deferral lists are not processed any more. Stable mmc enumeration can be achieved by filling /aliases node properly (4700a00755fb commit's rationale). After revert: [ 9.006816] IP-Config: Complete: [ 9.010058] device=lan0, ... Tested-by: Andreas Kemnade # GTA04, Panda, BT200 Reviewed-by: Tony Lindgren Signed-off-by: Alexander Sverdlin Link: https://lore.kernel.org/r/20250401090643.2776793-1-alexander.sverdlin@siemens.com Signed-off-by: Kevin Hilman Signed-off-by: Sasha Levin

bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value

2025-06-27T10:04:19+00:00

[ Upstream commit 23d060136841c58c2f9ee8c08ad945d1879ead4b ] In case the MC firmware runs in debug mode with extensive prints pushed to the console, the current timeout of 500ms is not enough. Increase the timeout value so that we don't have any chance of wrongly assuming that the firmware is not responding when it's just taking more time. Signed-off-by: Laurentiu Tudor Signed-off-by: Ioana Ciornei Link: https://lore.kernel.org/r/20250408105814.2837951-7-ioana.ciornei@nxp.com Signed-off-by: Christophe Leroy Signed-off-by: Sasha Levin