kernel/linux.git/drivers/bus, branch v4.19.112

bus: ti-sysc: Fix sysc_unprepare() when no clocks have been allocated

2020-01-27T13:50:36+00:00

[ Upstream commit aaa29bb01cc4bf5a87dbdb219efba3b09f259d8e ] If we return early before ddata->clocks have been allocated we will get a NULL pointer dereference in sysc_unprepare(). Let's fix this by returning early when no clocks are allocated. Fixes: 0eecc636e5a2 ("bus: ti-sysc: Add minimal TI sysc interconnect target driver") Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()

2020-01-27T13:50:16+00:00

[ Upstream commit 9bd34c63f5536c490c152833c77fa47f59aeade3 ] Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") started producing a warning for pwm-omap-dmtimer: WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x2f8/0x388 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle): Data Access in Supervisor mode during Functional access ... __pm_runtime_idle omap_dm_timer_disable pwm_omap_dmtimer_start pwm_omap_dmtimer_enable pwm_apply_state pwm_vibrator_start pwm_vibrator_play_work This is because the timer that pwm-omap-dmtimer is using is now being probed with ti-sysc interconnect target module instead of omap_device and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully compatible with what omap_device has been doing. We could fix this by reverting the timer changes and have the timer probe again with omap_device. Or we could add more quirk handling to ti-sysc driver. But as these options don't work nicely as longer term solutions, let's just make timers probe with ti-sysc without any quirks. To do this, all we need to do is remove quirks for timers for ti-sysc, and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm. We should not use pm_runtime_irq_safe() anyways for drivers as it will take a permanent use count on the parent device blocking the parent devices from idling and has been forcing ti-sysc driver to use a quirk flag. Note that we will move the timer data to DEBUG section later on in clean-up patches. Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Andy Shevchenko Cc: Bartosz Golaszewski Cc: Daniel Lezcano Cc: H. Nikolaus Schaller Cc: Keerthy Cc: Ladislav Michl Cc: Pavel Machek Cc: Sebastian Reichel Cc: Tero Kristo Cc: Thierry Reding Cc: Thomas Gleixner Reported-by: H. Nikolaus Schaller Tested-By: Andreas Kemnade Tested-By: H. Nikolaus Schaller Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: ti-sysc: Add mcasp optional clocks flag

2020-01-27T13:50:02+00:00

[ Upstream commit 2c63a833e4500b341a62bf97e67488909ae12086 ] We have OPT_CLKS_NEEDED in legacy platform data, but it's missing from the ti-sysc driver for device tree based configuration. In order to pass OPT_CLKS_NEEDED quirk flag we need to update omap4 module data and add a new compatible for dra7 as the module layout is different from sysc_regbits_omap4_mcasp. Fixes: 70a65240efb1 ("bus: ti-sysc: Add register bits for interconnect target modules") Cc: Mark Rutland Cc: Rob Herring Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: ti-sysc: Fix getting optional clocks in clock_roles

2019-12-13T07:51:23+00:00

[ Upstream commit 7b4f8ac2f1acdff3c0cce23d8c3b86434a6e768a ] We can have holes in clock_roles with interface clock missing for example. Currently getting an optional clock will fail if there are only a functional clock and an optional clock. Fixes: 09dfe5810762 ("bus: ti-sysc: Add handling for clkctrl opt clocks") Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: ti-sysc: Check for no-reset and no-idle flags at the child level

2019-12-05T08:20:00+00:00

[ Upstream commit 4014c08ba39476a18af546186da625a6833a1529 ] With ti-sysc, we need to now have the device tree properties for ti,no-reset-on-init and ti,no-idle-on-init at the module level instead of the child device level. Let's check for these properties at the child device level to enable quirks, and warn about moving the properties to the module level. Otherwise am335x-evm based boards tagging gpio1 with ti,no-reset-on-init will have their DDR power disabled if wired up in such a tricky way. Note that this should not be an issue for earlier kernels as we don't rely on this until the dts files have been updated to probe with ti-sysc interconnect target driver. Cc: Peter Ujfalusi Reported-by: Peter Ujfalusi Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()

2019-09-21T05:16:51+00:00

[ Upstream commit a304f483b6b00d42bde41c45ca52c670945348e2 ] The clocks are not yet parsed and prepared until after a successful sysc_get_clocks(), so there is no need to unprepare the clocks upon any failure of any of the prior functions in sysc_probe(). The current code path would have been a no-op because of the clock validity checks within sysc_unprepare(), but let's just simplify the cleanup path by returning the error directly. While at this, also fix the cleanup path for a sysc_init_resets() failure which is executed after the clocks are prepared. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: ti-sysc: Fix using configured sysc mask value

2019-09-21T05:16:48+00:00

[ Upstream commit e212abd452a4af3174fcd469d46656f83e135a19 ] We have cases where there are no softreset bits like with am335x lcdc. In that case ti,sysc-mask = <0> needs to be handled properly. Tested-by: Keerthy Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: hisi_lpc: Add .remove method to avoid driver unbind crash

2019-09-06T08:22:20+00:00

commit 10e62b47973b0b0ceda076255bcb147b83e20517 upstream. The original driver author seemed to be under the impression that a driver cannot be removed if it does not have a .remove method. Or maybe if it is a built-in platform driver. This is not true. This crash can be created: root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# echo HISI0191\:00 > unbind root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# ipmitool raw 6 1 Unable to handle kernel paging request at virtual address ffff000010035010 Mem abort info: ESR = 0x96000047 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000118b000 [ffff000010035010] pgd=0000041ffbfff003, pud=0000041ffbffe003, pmd=0000041ffbffd003, pte=0000000000000000 Internal error: Oops: 96000047 [#1] PREEMPT SMP Modules linked in: CPU: 17 PID: 1473 Comm: ipmitool Not tainted 5.2.0-rc5-00003-gf68c53b414a3-dirty #198 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 20000085 (nzCv daIf -PAN -UAO) pc : hisi_lpc_target_in+0x7c/0x120 lr : hisi_lpc_target_in+0x70/0x120 sp : ffff00001efe3930 x29: ffff00001efe3930 x28: ffff841f9f599200 x27: 0000000000000002 x26: 0000000000000000 x25: 0000000000000080 x24: 00000000000000e4 x23: 0000000000000000 x22: 0000000000000064 x21: ffff801fb667d280 x20: 0000000000000001 x19: ffff00001efe39ac x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff841febe60340 x7 : ffff801fb55c52e8 x6 : 0000000000000000 x5 : 0000000000ffc0e3 x4 : 0000000000000001 x3 : ffff801fb667d280 x2 : 0000000000000001 x1 : ffff000010035010 x0 : ffff000010035000 Call trace: hisi_lpc_target_in+0x7c/0x120 hisi_lpc_comm_in+0x88/0x98 logic_inb+0x5c/0xb8 port_inb+0x18/0x20 bt_event+0x38/0x808 smi_event_handler+0x4c/0x5a0 check_start_timer_thread.part.4+0x40/0x58 sender+0x78/0x88 smi_send.isra.6+0x94/0x108 i_ipmi_request+0x2c4/0x8f8 ipmi_request_settime+0x124/0x160 handle_send_req+0x19c/0x208 ipmi_ioctl+0x2c0/0x990 do_vfs_ioctl+0xb8/0x8f8 ksys_ioctl+0x80/0xb8 __arm64_sys_ioctl+0x1c/0x28 el0_svc_common.constprop.0+0x64/0x160 el0_svc_handler+0x28/0x78 el0_svc+0x8/0xc Code: 941d1511 aa0003f9 f94006a0 91004001 (b9000034) ---[ end trace aa842b86af7069e4 ]--- The problem here is that the host goes away but the associated logical PIO region remains registered, as do the children devices. Fix by adding a .remove method to tidy-up by removing the child devices and unregistering the logical PIO region. Cc: stable@vger.kernel.org Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings") Signed-off-by: John Garry Signed-off-by: Wei Xu Signed-off-by: Greg Kroah-Hartman

bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free

2019-09-06T08:22:20+00:00

commit 1b15a5632a809ab57d403fd972ca68785363b654 upstream. If, after registering a logical PIO range, the driver probe later fails, the logical PIO range memory will be released automatically. This causes an issue, in that the logical PIO range is not unregistered and the released range memory may be later referenced. Fix by unregistering the logical PIO range. And since we now unregister the logical PIO range for probe failure, avoid the special ordering of setting logical PIO range ops, which was the previous (poor) attempt at a safeguard against this. Cc: stable@vger.kernel.org Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings") Signed-off-by: John Garry Signed-off-by: Wei Xu Signed-off-by: Greg Kroah-Hartman

Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2

2018-08-28T16:58:03+00:00