kernel/linux.git/drivers/bluetooth, branch v4.14.85

Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth

2018-11-13T19:14:54+00:00

[ Upstream commit a357ea098c9605f60d92a66a9073f56ce25726da ] This patch adds the device ID for the AMPAK AP6335 combo module used in the 1st generation WeTek Hub Android/LibreELEC HTPC box. The WiFI chip identifies itself as BCM4339, while Bluetooth identifies itself as BCM4335 (rev C0): ``` [ 4.864248] Bluetooth: hci0: BCM: chip id 86 [ 4.866388] Bluetooth: hci0: BCM: features 0x2f [ 4.889317] Bluetooth: hci0: BCM4335C0 [ 4.889332] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0000 [ 9.778383] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0268 ``` Output from hciconfig: ``` hci0: Type: Primary Bus: UART BD Address: 43:39:00:00:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:7567 acl:234 sco:0 events:386 errors:0 TX bytes:53844 acl:77 sco:0 commands:304 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'HUB' Class: 0x0c0000 Service Classes: Rendering, Capturing Device Class: Miscellaneous, HCI Version: 4.0 (0x6) Revision: 0x10c LMP Version: 4.0 (0x6) Subversion: 0x6109 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by: Christian Hewitt Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_ldisc: Free rw_semaphore on close

2018-10-18T07:16:21+00:00

[ Upstream commit e6a57d22f787e73635ce0d29eef0abb77928b3e9 ] The percpu_rw_semaphore is not currently freed, and this leads to a crash when the stale rcu callback is invoked. DEBUG_OBJECTS detects this. ODEBUG: free active (active state 1) object type: rcu_head hint: (null) ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2024 at debug_print_object+0xac/0xc8 PC is at debug_print_object+0xac/0xc8 LR is at debug_print_object+0xac/0xc8 Call trace: [] debug_print_object+0xac/0xc8 [] debug_check_no_obj_freed+0x1e8/0x228 [] kfree+0x1cc/0x250 [] hci_uart_tty_close+0x54/0x108 [] tty_ldisc_close.isra.1+0x40/0x58 [] tty_ldisc_kill+0x1c/0x40 [] tty_ldisc_release+0x94/0x170 [] tty_release_struct+0x1c/0x58 [] tty_release+0x3b0/0x490 [] __fput+0x88/0x1d0 [] ____fput+0xc/0x18 [] task_work_run+0x9c/0xc0 [] do_exit+0x24c/0x8a0 [] do_group_exit+0x38/0xa0 [] __wake_up_parent+0x0/0x28 [] el0_svc_naked+0x34/0x38 ---[ end trace bfe08cbd89098cdf ]--- Signed-off-by: Hermes Zhang Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: Add a new Realtek 8723DE ID 0bda:b009

2018-10-04T00:00:46+00:00

[ Upstream commit 45ae68b8cfc25bdbffc11248001c47ab1b76ff6e ] Without this patch we cannot turn on the Bluethooth adapter on HP 14-bs007la. T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b009 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Jian-Hong Pan Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV

2018-09-19T20:43:38+00:00

[ Upstream commit 6c3711ec64fd23a9abc8aaf59a9429569a6282df ] This driver was recently updated to use serdev, so add the appropriate dependency. Without this one can get compiler warnings like this if CONFIG_SERIAL_DEV_BUS is not enabled: CC [M] drivers/bluetooth/hci_h5.o drivers/bluetooth/hci_h5.c:934:36: warning: ‘h5_serdev_driver’ defined but not used [-Wunused-variable] static struct serdev_device_driver h5_serdev_driver = { ^~~~~~~~~~~~~~~~ Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops

2018-08-15T16:12:49+00:00

commit d73e172816652772114827abaa2dbc053eecbbd7 upstream. John Stultz reports a boot time crash with the HiKey board (which uses hci_serdev) occurring in hci_uart_tx_wakeup(). That function is contained in hci_ldisc.c, but also called from the newer hci_serdev.c. It acquires the proto_lock in struct hci_uart and it turns out that we forgot to init the lock in the serdev code path, thus causing the crash. John bisected the crash to commit 67d2f8781b9f ("Bluetooth: hci_ldisc: Allow sleeping while proto locks are held"), but the issue was present before and the commit merely exposed it. (Perhaps by luck, the crash did not occur with rwlocks.) Init the proto_lock in the serdev code path to avoid the oops. Stack trace for posterity: Unable to handle kernel read from unreadable memory at 406f127000 [000000406f127000] user address but active_mm is swapper Internal error: Oops: 96000005 [#1] PREEMPT SMP Hardware name: HiKey Development Board (DT) Call trace: hci_uart_tx_wakeup+0x38/0x148 hci_uart_send_frame+0x28/0x38 hci_send_frame+0x64/0xc0 hci_cmd_work+0x98/0x110 process_one_work+0x134/0x330 worker_thread+0x130/0x468 kthread+0xf8/0x128 ret_from_fork+0x10/0x18 Link: https://lkml.org/lkml/2017/11/15/908 Reported-and-tested-by: John Stultz Cc: Ronald Tschalär Cc: Rob Herring Cc: Sumit Semwal Signed-off-by: Lukas Wunner Signed-off-by: Marcel Holtmann Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_ldisc: Allow sleeping while proto locks are held.

2018-08-15T16:12:49+00:00

commit 67d2f8781b9f00d1089aafcfa3dc09fcd0f343e2 upstream. Commit dec2c92880cc5435381d50e3045ef018a762a917 ("Bluetooth: hci_ldisc: Use rwlocking to avoid closing proto races") introduced locks in hci_ldisc that are held while calling the proto functions. These locks are rwlock's, and hence do not allow sleeping while they are held. However, the proto functions that hci_bcm registers use mutexes and hence need to be able to sleep. In more detail: hci_uart_tty_receive() and hci_uart_dequeue() both acquire the rwlock, after which they call proto->recv() and proto->dequeue(), respectively. In the case of hci_bcm these point to bcm_recv() and bcm_dequeue(). The latter both acquire the bcm_device_lock, which is a mutex, so doing so results in a call to might_sleep(). But since we're holding a rwlock in hci_ldisc, that results in the following BUG (this for the dequeue case - a similar one for the receive case is omitted for brevity): BUG: sleeping function called from invalid context at kernel/locking/mutex.c in_atomic(): 1, irqs_disabled(): 0, pid: 7303, name: kworker/7:3 INFO: lockdep is turned off. CPU: 7 PID: 7303 Comm: kworker/7:3 Tainted: G W OE 4.13.2+ #17 Hardware name: Apple Inc. MacBookPro13,3/Mac-A5C67F76ED83108C, BIOS MBP133.8 Workqueue: events hci_uart_write_work [hci_uart] Call Trace: dump_stack+0x8e/0xd6 ___might_sleep+0x164/0x250 __might_sleep+0x4a/0x80 __mutex_lock+0x59/0xa00 ? lock_acquire+0xa3/0x1f0 ? lock_acquire+0xa3/0x1f0 ? hci_uart_write_work+0xd3/0x160 [hci_uart] mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 bcm_dequeue+0x21/0xc0 [hci_uart] hci_uart_write_work+0xe6/0x160 [hci_uart] process_one_work+0x253/0x6a0 worker_thread+0x4d/0x3b0 kthread+0x133/0x150 We can't replace the mutex in hci_bcm, because there are other calls there that might sleep. Therefore this replaces the rwlock's in hci_ldisc with rw_semaphore's (which allow sleeping). This is a safer approach anyway as it reduces the restrictions on the proto callbacks. Also, because acquiring write-lock is very rare compared to acquiring the read-lock, the percpu variant of rw_semaphore is used. Lastly, because hci_uart_tx_wakeup() may be called from an IRQ context, we can't block (sleep) while trying acquire the read lock there, so we use the trylock variant. Signed-off-by: Ronald Tschalär Reviewed-by: Lukas Wunner Signed-off-by: Marcel Holtmann Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: add ID for LiteOn 04ca:301a

2018-08-03T05:50:32+00:00

[ Upstream commit d666fc5479ad76a1bcbe6476d4997cea714bab2d ] Contains a QCA6174A chipset, with USB BT. Let's support loading firmware on it. >From usb-devices: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=301a Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Vic Wei Signed-off-by: Matthias Kaehlcke Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Add a new Realtek 8723DE ID 2ff8:b011

2018-08-03T05:50:27+00:00

[ Upstream commit 66d9975c5a7c40aa7e4bb0ec0b0c37ba1f190923 ] Without this patch we cannot turn on the Bluethooth adapter on ASUS E406MA. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2ff8 ProdID=b011 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Jian-Hong Pan Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_qca: Fix "Sleep inside atomic section" warning

2018-08-03T05:50:27+00:00

[ Upstream commit 9960521c44a5d828f29636ceac0600603ecbddbf ] This patch fixes the following warning during boot: do not call blocking ops when !TASK_RUNNING; state=1 set at [<(ptrval)>] qca_setup+0x194/0x750 [hci_uart] WARNING: CPU: 2 PID: 1878 at kernel/sched/core.c:6135 __might_sleep+0x7c/0x88 In qca_set_baudrate(), the current task state is set to TASK_UNINTERRUPTIBLE before going to sleep for 300ms. It was then restored to TASK_INTERRUPTIBLE. This patch sets the current task state back to TASK_RUNNING instead. Signed-off-by: Thierry Escande Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_qca: Avoid missing rampatch failure with userspace fw loader

2018-07-03T09:24:49+00:00

commit 7dc5fe0814c35ec4e7d2e8fa30abab72e0e6a172 upstream. AOSP use userspace firmware loader to load firmwares, which will return -EAGAIN in case qca/rampatch_00440302.bin is not found. Since there is no rampatch for dragonboard820c QCA controller revision, just make it work as is. CC: Loic Poulain CC: Nicolas Dechesne CC: Marcel Holtmann CC: Johan Hedberg CC: Stable Signed-off-by: Amit Pundir Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman