kernel/linux.git/drivers/bluetooth/hci_serdev.c, branch v6.19.11

Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmap

2025-07-16T19:37:53+00:00

The 'quirks' member already ran out of bits on some platforms some time ago. Replace the integer member by a bitmap in order to have enough bits in future. Replace raw bit operations by accessor macros. Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING") Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE") Suggested-by: Pauli Virtanen Tested-by: Ivan Pravdin Signed-off-by: Kiran K Signed-off-by: Christian Eggers Signed-off-by: Luiz Augusto von Dentz

Bluetooth: HCI: Remove HCI_AMP support

2024-05-14T14:54:49+00:00

Since BT_HS has been remove HCI_AMP controllers no longer has any use so remove it along with the capability of creating AMP controllers. Since we no longer need to differentiate between AMP and Primary controllers, as only HCI_PRIMARY is left, this also remove hdev->dev_type altogether. Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS") Signed-off-by: Luiz Augusto von Dentz

Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-03-21T19:44:10+00:00

Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY/Serial driver updates and cleanups for 6.9-rc1. Included in here are: - more tty cleanups from Jiri - loads of 8250 driver cleanups from Andy - max310x driver updates - samsung serial driver updates - uart_prepare_sysrq_char() updates for many drivers - platform driver remove callback void cleanups - stm32 driver updates - other small tty/serial driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) dt-bindings: serial: stm32: add power-domains property serial: 8250_dw: Replace ACPI device check by a quirk serial: Lock console when calling into driver before registration serial: 8250_uniphier: Switch to use uart_read_port_properties() serial: 8250_tegra: Switch to use uart_read_port_properties() serial: 8250_pxa: Switch to use uart_read_port_properties() serial: 8250_omap: Switch to use uart_read_port_properties() serial: 8250_of: Switch to use uart_read_port_properties() serial: 8250_lpc18xx: Switch to use uart_read_port_properties() serial: 8250_ingenic: Switch to use uart_read_port_properties() serial: 8250_dw: Switch to use uart_read_port_properties() serial: 8250_bcm7271: Switch to use uart_read_port_properties() serial: 8250_bcm2835aux: Switch to use uart_read_port_properties() serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties() serial: port: Introduce a common helper to read properties serial: core: Add UPIO_UNKNOWN constant for unknown port type serial: core: Move struct uart_port::quirks closer to possible values serial: sh-sci: Call sci_serial_{in,out}() directly serial: core: only stop transmit when HW fifo is empty serial: pch: Use uart_prepare_sysrq_char(). ...

Bluetooth: hci_h5: Add ability to allocate memory for private data

2024-03-06T22:26:21+00:00

In some cases uart-base drivers may need to use priv data. For example, to store information needed for devcoredump. Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support") Signed-off-by: Andrey Skvortsov Signed-off-by: Luiz Augusto von Dentz

treewide, serdev: change receive_buf() return type to size_t

2024-01-28T02:13:53+00:00

receive_buf() is called from ttyport_receive_buf() that expects values ">= 0" from serdev_controller_receive_buf(), change its return type from ssize_t to size_t. The need for this clean-up was noticed while fixing a warning, see commit 94d053942544 ("Bluetooth: btnxpuart: fix recv_buf() return value"). Changing the callback prototype to return an unsigned seems the best way to document the API and ensure that is properly used. GNSS drivers implementation of serdev receive_buf() callback return directly the return value of gnss_insert_raw(). gnss_insert_raw() returns a signed int, however this is not an issue since the value returned is always positive, because of the kfifo_in() implementation. gnss_insert_raw() could be changed to return also an unsigned, however this is not implemented here as request by the GNSS maintainer Johan Hovold. Suggested-by: Jiri Slaby Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/ Signed-off-by: Francesco Dolcini Acked-by: Jonathan Cameron #for-iio Reviewed-by: Johan Hovold Reviewed-by: Rob Herring Reviewed-by: Alex Elder Acked-by: Maximilian Luz # for platform/surface Acked-by: Lee Jones Acked-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20240122180551.34429-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman

tty: serdev: convert to u8 and size_t

2023-12-08T11:02:38+00:00

Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. This patch converts struct serdev_device_ops hooks and its instantiations. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Rob Herring Acked-by: Johan Hovold Link: https://lore.kernel.org/r/20231206073712.17776-24-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure

2022-09-19T17:33:39+00:00

syzbot is reporting NULL pointer dereference at hci_uart_tty_close() [1], for rcu_sync_enter() is called without rcu_sync_init() due to hci_uart_tty_open() ignoring percpu_init_rwsem() failure. While we are at it, fix that hci_uart_register_device() ignores percpu_init_rwsem() failure and hci_uart_unregister_device() does not call percpu_free_rwsem(). Link: https://syzkaller.appspot.com/bug?extid=576dfca25381fb6fbc5f [1] Reported-by: syzbot Signed-off-by: Tetsuo Handa Fixes: 67d2f8781b9f00d1 ("Bluetooth: hci_ldisc: Allow sleeping while proto locks are held.") Fixes: d73e172816652772 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add default wakeup callback for HCI UART driver

2022-07-22T00:09:48+00:00

Bluetooth HCI devices indicate if they are able to wakeup in the wakeup callback since 'commit 4539ca67fe8e ("Bluetooth: Rename driver .prevent_wake to .wakeup")'. This patch adds a default wakeup callback for Bluetooth HCI UAR devices. It assumes Bluetooth HCI UART devices are wakeable for backward compatibility. For those who need a customized behavior, one can override it before calling hci_uart_register_device(). Fixes: 4539ca67fe8e ("Bluetooth: Rename driver .prevent_wake to .wakeup") Signed-off-by: Ying Hsu Reviewed-by: Alain Michaud Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_serdev: call init_rwsem() before p->open()

2022-01-21T22:46:48+00:00

kvartet reported, that hci_uart_tx_wakeup() uses uninitialized rwsem. The problem was in wrong place for percpu_init_rwsem() call. hci_uart_proto::open() may register a timer whose callback may call hci_uart_tx_wakeup(). There is a chance, that hci_uart_register_device() thread won't be fast enough to call percpu_init_rwsem(). Fix it my moving percpu_init_rwsem() call before p->open(). INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 2 PID: 18524 Comm: syz-executor.5 Not tainted 5.16.0-rc6 #9 ... Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 assign_lock_key kernel/locking/lockdep.c:951 [inline] register_lock_class+0x148d/0x1950 kernel/locking/lockdep.c:1263 __lock_acquire+0x106/0x57e0 kernel/locking/lockdep.c:4906 lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5602 percpu_down_read_trylock include/linux/percpu-rwsem.h:92 [inline] hci_uart_tx_wakeup+0x12e/0x490 drivers/bluetooth/hci_ldisc.c:124 h5_timed_event+0x32f/0x6a0 drivers/bluetooth/hci_h5.c:188 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 Fixes: d73e17281665 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops") Reported-by: Yiru Xu Signed-off-by: Pavel Skripkin Signed-off-by: Marcel Holtmann

Bluetooth: hci_h5: Disable the hci_suspend_notifier for btrtl devices

2021-07-22T14:06:09+00:00

The hci_suspend_notifier which was introduced last year, is causing problems for uart attached btrtl devices. These devices may loose their firmware and their baudrate setting over a suspend/resume. Since we don't even know the baudrate after a suspend/resume recovering from this is tricky. The driver solves this by treating these devices the same as USB BT HCIs which drop of the bus during suspend. Specifically the driver: 1. Simply unconditionally turns the device fully off during system-suspend to save maximum power. 2. Calls device_reprobe() from a workqueue to fully re-init the device from scratch on system-resume (unregistering the old HCI and registering a new HCI). This means that these devices do not benefit from the suspend / resume handling work done by the hci_suspend_notifier. At best this unnecessarily adds some time to the suspend/resume time. But in practice this is actually causing problems: 1. These btrtl devices seem to not like the HCI_OP_WRITE_SCAN_ENABLE( SCAN_DISABLED) request being send to them when entering the BT_SUSPEND_CONFIGURE_WAKE state. The same request send on BT_SUSPEND_DISCONNECT works fine, but the second one send (unnecessarily?) from the BT_SUSPEND_CONFIGURE_WAKE transition causes the device to hang: [ 573.497754] PM: suspend entry (s2idle) [ 573.554615] Filesystems sync: 0.056 seconds [ 575.837753] Bluetooth: hci0: Timed out waiting for suspend events [ 575.837801] Bluetooth: hci0: Suspend timeout bit: 4 [ 575.837925] Bluetooth: hci0: Suspend notifier action (3) failed: -110 2. The PM_POST_SUSPEND / BT_RUNNING transition races with the driver-unbinding done by the device_reprobe() work. If the hci_suspend_notifier wins the race it is talking to a dead device leading to the following errors being logged: [ 598.686060] Bluetooth: hci0: Timed out waiting for suspend events [ 598.686124] Bluetooth: hci0: Suspend timeout bit: 5 [ 598.686237] Bluetooth: hci0: Suspend notifier action (4) failed: -110 In both cases things still work, but the suspend-notifier is causing these ugly errors getting logged and ut increase both the suspend- and the resume-time by 2 seconds. This commit avoids these problems by disabling the hci_suspend_notifier. Cc: Luiz Augusto von Dentz Cc: Vasily Khoruzhick Cc: Abhishek Pandit-Subedi Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann