kernel/linux.git/drivers/bluetooth/btusb.c, branch v6.1.181

Bluetooth: btusb: fix wakeup source leak on probe failure

2026-07-24T13:54:20+00:00

commit 3d93e1bb0fb881fe3ef961d1120556658e9cac4d upstream. Make sure to disable wakeup on probe failure to avoid leaking the wakeup source. Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support") Cc: stable@vger.kernel.org # 4.11 Cc: Rajat Jain Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: fix use-after-free on marvell probe failure

2026-07-24T13:54:20+00:00

commit c5b600a3c05b1a7a110d558df935a8fc8a471c79 upstream. Make sure to stop any TX URBs submitted during Marvell OOB wakeup configuration on later probe failures to avoid use-after-free in the completion callback. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. Link: https://sashiko.dev/#/patchset/20260402092704.2346710-1-johan%40kernel.org Fixes: a4ccc9e33d2f ("Bluetooth: btusb: Configure Marvell to use one of the pins for oob wakeup") Cc: stable@vger.kernel.org # 4.11 Cc: Rajat Jain Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: fix use-after-free on registration failure

2026-07-24T13:54:20+00:00

commit eedc6867ebad73edbfaf9a0a65fbef7115cc4753 upstream. Make sure to release the sibling interfaces in case controller registration fails to avoid use-after-free and double-free when they are eventually disconnected. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. Link: https://sashiko.dev/#/patchset/20260402092704.2346710-1-johan%40kernel.org Fixes: 9bfa35fe422c ("[Bluetooth] Add SCO support to btusb driver") Fixes: 9d08f50401ac ("Bluetooth: btusb: Add support for Broadcom LM_DIAG interface") Cc: stable@vger.kernel.org # 2.6.27 Reviewed-by: Paul Menzel Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Allow firmware re-download when version matches

2026-06-19T11:36:59+00:00

commit 82855073c1081732656734b74d7d1d5e4cfd0da7 upstream. The Bluetooth host decides whether to download firmware by reading the controller firmware download completion flag and firmware version information. If a USB error occurs during the firmware download process (for example due to a USB disconnect), the download is aborted immediately. An incomplete firmware transfer does not cause the controller to set the download completion flag, but the firmware version information may be updated at an early stage of the download process. In this case, after USB reconnection, the host attempts to re-download the firmware because the download completion flag is not set. However, since the controller reports the same firmware version as the target firmware, the download is skipped. This ultimately results in the firmware not being properly updated on the controller. This change removes the restriction that skips firmware download when the versions are equal. It covers scenarios where the USB connection can be disconnected at any time and ensures that firmware download can be retriggered after USB reconnection, allowing the Bluetooth firmware to be correctly and completely updated. Fixes: 3267c884cefa ("Bluetooth: btusb: Add support for QCA ROME chipset family") Cc: stable@vger.kernel.org Signed-off-by: Shuai Zhang Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: clamp SCO altsetting table indices

2026-04-11T12:16:08+00:00

[ Upstream commit 129fa608b6ad08b8ab7178eeb2ec272c993aaccc ] btusb_work() maps the number of active SCO links to USB alternate settings through a three-entry lookup table when CVSD traffic uses transparent voice settings. The lookup currently indexes alts[] with data->sco_num - 1 without first constraining sco_num to the number of available table entries. While the table only defines alternate settings for up to three SCO links, data->sco_num comes from hci_conn_num() and is used directly. Cap the lookup to the last table entry before indexing it so the driver keeps selecting the highest supported alternate setting without reading past alts[]. Fixes: baac6276c0a9 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints") Signed-off-by: Pengpeng Hou Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: btusb: Add device ID for Realtek RTL8761BU

2026-03-04T12:20:28+00:00

[ Upstream commit cc6383d4f0cf6127c0552f94cae517a06ccc6b17 ] Add USB device ID 0x2c0a:0x8761 to the btusb driver fo the Realtek RTL8761BU Bluetooth adapter. Reference: https://www.startech.com/en-us/networking-io/av53c1-usb-bluetooth Signed-off-by: Jacopo Scannella Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: btusb: Add new VID/PID for RTL8852CE

2026-03-04T12:20:28+00:00

[ Upstream commit d9f7c39c6b7548bd70519b241b6c2d1bcc658d4b ] Add VID:PID 13d3:3612 to the quirks_table. This ID pair is found in the Realtek RTL8852CE PCIe module in an ASUS TUF A14 2025 (FA401KM) laptop. Tested on aforementioned laptop. The device info from /sys/kernel/debug/usb/devices is listed as below. T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3612 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Shell Chen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: btusb: revert use of devm_kzalloc in btusb

2026-01-11T14:19:00+00:00

[ Upstream commit 252714f1e8bdd542025b16321c790458014d6880 ] This reverts commit 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file"). In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. This ties the lifetime of all the btusb data to the binding of a driver to one interface, INTF. In a driver that binds to other interfaces, ISOC and DIAG, this is an accident waiting to happen. The issue is revealed in btusb_disconnect(), where calling usb_driver_release_interface(&btusb_driver, data->intf) will have devm free the data that is also being used by the other interfaces of the driver that may not be released yet. To fix this, revert the use of devm and go back to freeing memory explicitly. Fixes: 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file") Signed-off-by: Raphael Pinsonneault-Thibeault Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE

2026-01-11T14:18:41+00:00

[ Upstream commit 525459da4bd62a81142fea3f3d52188ceb4d8907 ] Add VID 13d3 & PID 3533 for Realtek RTL8821CE USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3533 Rev= 1.10 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Gongwei Li Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: btusb: reorder cleanup in btusb_disconnect to avoid UAF

2025-12-06T21:12:32+00:00

[ Upstream commit 23d22f2f71768034d6ef86168213843fc49bf550 ] There is a KASAN: slab-use-after-free read in btusb_disconnect(). Calling "usb_driver_release_interface(&btusb_driver, data->intf)" will free the btusb data associated with the interface. The same data is then used later in the function, hence the UAF. Fix by moving the accesses to btusb data to before the data is free'd. Reported-by: syzbot+2fc81b50a4f8263a159b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2fc81b50a4f8263a159b Tested-by: syzbot+2fc81b50a4f8263a159b@syzkaller.appspotmail.com Fixes: fd913ef7ce619 ("Bluetooth: btusb: Add out-of-band wakeup support") Signed-off-by: Raphael Pinsonneault-Thibeault Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin