kernel/linux.git/drivers/bluetooth/btusb.c, branch v5.6.17

Bluetooth: btusb: Add support for 04ca:3021 QCA_ROME device

2020-01-06T13:36:00+00:00

USB "VendorID:04ca ProductID:3021" is a new QCA ROME USB Bluetooth device, this patch will support firmware downloading for it. T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3021 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Rocky Liao Signed-off-by: Marcel Holtmann

Bluetooth: btusb: Disable runtime suspend on Realtek devices

2019-12-05T09:31:29+00:00

After commit 9e45524a0111 ("Bluetooth: btusb: Fix suspend issue for Realtek devices") both WiFi and Bluetooth stop working after reboot: [ 34.322617] usb 1-8: reset full-speed USB device number 3 using xhci_hcd [ 34.450401] usb 1-8: device descriptor read/64, error -71 [ 34.694375] usb 1-8: device descriptor read/64, error -71 ... [ 44.599111] rtw_pci 0000:02:00.0: failed to poll offset=0x5 mask=0x3 value=0x0 [ 44.599113] rtw_pci 0000:02:00.0: mac power on failed [ 44.599114] rtw_pci 0000:02:00.0: failed to power on mac [ 44.599114] rtw_pci 0000:02:00.0: leave idle state failed [ 44.599492] rtw_pci 0000:02:00.0: failed to leave ips state [ 44.599493] rtw_pci 0000:02:00.0: failed to leave idle state That commit removed USB_QUIRK_RESET_RESUME, which not only resets the USB device after resume, it also prevents the device from being runtime suspended by USB core. My experiment shows if the Realtek btusb device ever runtime suspends once, the entire wireless module becomes useless after reboot. So let's explicitly disable runtime suspend on Realtek btusb device for now. Fixes: 9e45524a0111 ("Bluetooth: btusb: Fix suspend issue for Realtek devices") Signed-off-by: Kai-Heng Feng Signed-off-by: Marcel Holtmann

Bluetooth: btusb: fix memory leak on fw

2019-11-29T19:21:33+00:00

Currently the error return path when the call to btusb_mtk_hci_wmt_sync fails does not free fw. Fix this by returning via the error_release_fw label that performs the free'ing. Addresses-Coverity: ("Resource leak") Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Signed-off-by: Colin Ian King Signed-off-by: Marcel Holtmann

Bluetooth: btusb: fix non-atomic allocation in completion handler

2019-11-28T18:29:01+00:00

USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Cc: stable # 5.3 Cc: Sean Wang Signed-off-by: Johan Hovold Signed-off-by: Marcel Holtmann

Bluetooth: btusb: Edit the logical value for Realtek Bluetooth reset

2019-11-27T05:40:09+00:00

It should be pull low and pull high on the physical line for the Realtek Bluetooth reset. gpiod_set_value_cansleep() takes ACTIVE_LOW status for the logical value settings, so the original commit should be corrected. Signed-off-by: Max Chou Signed-off-by: Marcel Holtmann

Bluetooth: btusb: fix PM leak in error case of setup

2019-11-15T08:06:38+00:00

If setup() fails a reference for runtime PM has already been taken. Proper use of the error handling in btusb_open()is needed. You cannot just return. Fixes: ace31982585a3 ("Bluetooth: btusb: Add setup callback for chip init on USB") Signed-off-by: Oliver Neukum Signed-off-by: Marcel Holtmann

Bluetooth: btusb: Trigger Intel FW download error recovery

2019-10-17T07:23:47+00:00

Sometimes during FW data download stage, in case of an error is encountered the controller device could not be recovered. To recover from such failures send Intel hard Reset to re-trigger FW download in following error scenarios: 1. Intel Read version command error 2. Firmware download timeout 3. Failure in Intel Soft Reset for switching to operational FW 4. Boot timeout for switching to operaional FW Signed-off-by: Raghuram Hegde Signed-off-by: Chethan T N Signed-off-by: Amit K Bag Signed-off-by: Marcel Holtmann

Bluetooth: btusb: Use IS_ENABLED instead of #ifdef

2019-10-16T17:26:40+00:00

For the different hardware support options, it is better to use IS_ENABLED check. Let the compiler do the needed optimizations. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: btusb: avoid unused function warning

2019-10-16T17:26:40+00:00

The btusb_rtl_cmd_timeout() function is used inside of an ifdef, leading to a warning when this part is hidden from the compiler: drivers/bluetooth/btusb.c:530:13: error: unused function 'btusb_rtl_cmd_timeout' [-Werror,-Wunused-function] Use an IS_ENABLED() check instead so the compiler can see the code and then discard it silently. Fixes: d7ef0d1e3968 ("Bluetooth: btusb: Use cmd_timeout to reset Realtek device") Signed-off-by: Arnd Bergmann Signed-off-by: Marcel Holtmann

Bluetooth: btusb: print FW version after FW download

2019-10-16T17:26:40+00:00

After FW download there is no print to confirm the current FW version. Add print to check FW version incase of FW download. Signed-off-by: Amit K Bag Signed-off-by: Yoni Shavit Signed-off-by: Chethan Tumkur Narayan Signed-off-by: Marcel Holtmann