kernel/linux.git/drivers/bluetooth/btqca.c, branch v6.19.11

Bluetooth: qca: fix ROM version reading on WCN3998 chips

2026-03-25T10:13:25+00:00

[ Upstream commit 99b2c531e0e797119ae1b9195a8764ee98b00e65 ] WCN3998 uses a bit different format for rom version: [ 5.479978] Bluetooth: hci0: setting up wcn399x [ 5.633763] Bluetooth: hci0: QCA Product ID :0x0000000a [ 5.645350] Bluetooth: hci0: QCA SOC Version :0x40010224 [ 5.650906] Bluetooth: hci0: QCA ROM Version :0x00001001 [ 5.665173] Bluetooth: hci0: QCA Patch Version:0x00006699 [ 5.679356] Bluetooth: hci0: QCA controller version 0x02241001 [ 5.691109] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv [ 6.680102] Bluetooth: hci0: QCA Downloading qca/crnv21.bin [ 6.842948] Bluetooth: hci0: QCA setup on UART is completed Fixes: 523760b7ff88 ("Bluetooth: hci_qca: Added support for WCN3998") Reviewed-by: Bartosz Golaszewski Signed-off-by: Dmitry Baryshkov Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmap

2025-07-16T19:37:53+00:00

The 'quirks' member already ran out of bits on some platforms some time ago. Replace the integer member by a bitmap in order to have enough bits in future. Replace raw bit operations by accessor macros. Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING") Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE") Suggested-by: Pauli Virtanen Tested-by: Ivan Pravdin Signed-off-by: Kiran K Signed-off-by: Christian Eggers Signed-off-by: Luiz Augusto von Dentz

Bluetooth: qca: fix NV variant for one of WCN3950 SoCs

2025-04-10T17:09:20+00:00

The QCA_WCN3950_SOC_ID_S should be using qca/cmnv13s.bin, rather than qca/cmnv13u.bin file. Correct the variant suffix to be used for this SoC ID. Fixes: d5712c511cb3 ("Bluetooth: qca: add WCN3950 support") Reported-by: Wojciech Slenska Closes: https://github.com/qualcomm-linux/meta-qcom/pull/817#discussion_r2022866431 Signed-off-by: Dmitry Baryshkov Signed-off-by: Luiz Augusto von Dentz

Bluetooth: qca: add WCN3950 support

2025-03-25T16:42:35+00:00

WCN3950 is another example of the WCN39xx BT/WiFI family of chips. It requires different firmware files and has different current requirements, so add it as a separate SoC type. The firmware for these chips has been recently added to the linux-firmware repository and will be a part of the upcoming release: - qca/cmbtfw12.tlv - qca/cmbtfw13.tlv - qca/cmnv12.bin - qca/cmnv13.bin - qca/cmnv13s.bin - qca/cmnv13t.bin Signed-off-by: Dmitry Baryshkov Signed-off-by: Luiz Augusto von Dentz

Bluetooth: qca: simplify WCN399x NVM loading

2025-03-25T16:42:19+00:00

The WCN399x code has two separate cases for loading the NVM data. In preparation to adding support for WCN3950, which also requires similar quirk, split the "variant" to be specified explicitly and merge two snprintfs into a single one. Signed-off-by: Dmitry Baryshkov Signed-off-by: Luiz Augusto von Dentz

Bluetooth: qca: Fix poor RF performance for WCN6855

2025-01-15T15:37:23+00:00

For WCN6855, board ID specific NVM needs to be downloaded once board ID is available, but the default NVM is always downloaded currently. The wrong NVM causes poor RF performance, and effects user experience for several types of laptop with WCN6855 on the market. Fix by downloading board ID specific NVM if board ID is available. Fixes: 095327fede00 ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855") Cc: stable@vger.kernel.org # 6.4 Signed-off-by: Zijun Hu Tested-by: Johan Hovold Reviewed-by: Johan Hovold Tested-by: Steev Klimaszewski #Thinkpad X13s Signed-off-by: Luiz Augusto von Dentz

Bluetooth: qca: Expand firmware-name to load specific rampatch

2025-01-15T15:34:12+00:00

The firmware-name property has been expanded to specify the names of NVM and rampatch firmware for certain chips, such as the QCA6698 Bluetooth chip. Although it shares the same IP core as the WCN6855, the QCA6698 has different RF components and RAM sizes, necessitating new firmware files. This change allows for the configuration of NVM and rampatch in DT. Possible configurations: firmware-name = QCA6698/hpnv21.bin, QCA6698/hpbtfw21.tlv; firmware-name = QCA6698/hpnv21, QCA6698/hpbtfw21.tlv; Signed-off-by: Cheng Jiang Signed-off-by: Luiz Augusto von Dentz

Bluetooth: qca: Update firmware-name to support board specific nvm

2025-01-15T15:33:56+00:00

Different connectivity boards may be attached to the same platform. For example, QCA6698-based boards can support either a two-antenna or three-antenna solution, both of which work on the sa8775p-ride platform. Due to differences in connectivity boards and variations in RF performance from different foundries, different NVM configurations are used based on the board ID. Therefore, in the firmware-name property, if the NVM file has an extension, the NVM file will be used. Otherwise, the system will first try the .bNN (board ID) file, and if that fails, it will fall back to the .bin file. Possible configurations: firmware-name = "QCA6698/hpnv21"; firmware-name = "QCA6698/hpnv21.bin"; Signed-off-by: Cheng Jiang Signed-off-by: Luiz Augusto von Dentz

Bluetooth: qca: Fix error code in qca_read_fw_build_info()

2024-05-14T14:51:09+00:00

Return -ENOMEM on allocation failure. Don't return success. Fixes: cda0d6a198e2 ("Bluetooth: qca: fix info leak when fetching fw build id") Signed-off-by: Dan Carpenter Reviewed-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz

Bluetooth: qca: drop bogus module version

2024-05-14T14:51:07+00:00

Random module versions serves no purpose, what matters is the kernel version. Drop the bogus module version which has never been updated. Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz