kernel/linux.git/drivers/bluetooth/btintel.c, branch v6.13.6

Bluetooth: btintel: Direct exception event to bluetooth stack

2024-11-14T20:40:55+00:00

Have exception event part of HCI traces which helps for debug. snoop traces: > HCI Event: Vendor (0xff) plen 79 Vendor Prefix (0x8780) Intel Extended Telemetry (0x03) Unknown extended telemetry event type (0xde) 01 01 de Unknown extended subevent 0x07 01 01 de 07 01 de 06 1c ef be ad de ef be ad de ef be ad de ef be ad de ef be ad de ef be ad de ef be ad de 05 14 ef be ad de ef be ad de ef be ad de ef be ad de ef be ad de 43 10 ef be ad de ef be ad de ef be ad de ef be ad de Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support") Signed-off-by: Kiran K Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btintel: Do no pass vendor events to stack

2024-11-14T20:32:28+00:00

During firmware download, vendor specific events like boot up and secure send result are generated. These events can be safely processed at the driver level. Passing on these events to stack prints unnecessary log as below. Bluetooth: hci0: Malformed MSFT vendor event: 0x02 Fixes: 3368aa357f3b ("Bluetooth: msft: Handle MSFT Monitor Device Event") Signed-off-by: Kiran K Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btintel: Add DSBR support for BlazarIW, BlazarU and GaP

2024-11-14T20:31:30+00:00

Add DSBR support for BlazarIW, BlazarU and Gale Peak2 cores. Refer commit eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive strength of BRI") for details about DSBR. Signed-off-by: Kiran K Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btintel_pcie: Add recovery mechanism

2024-11-14T20:30:53+00:00

This patch adds a recovery mechanism to recover controller if firmware download fails due to unresponsive controller, command timeout, firmware signature verification failure etc. Driver attmepts maximum of 5 times before giving up. Signed-off-by: Kiran K Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btintel_pcie: Add handshake between driver and firmware

2024-11-14T20:30:34+00:00

The following handshake mechanism needs be followed after firmware download is completed to bring the firmware to running state. After firmware fragments of Operational image are downloaded and secure sends result of the image succeeds, 1. Driver sends HCI Intel reset with boot option #1 to switch FW image. 2. FW sends Alive GP[0] MSIx 3. Driver enables data path (doorbell 0x460 for RBDs, etc...) 4. Driver gets Bootup event from firmware 5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0) 6. FW sends Alive GP[0] MSIx 7. Device host interface is fully set for BT protocol stack operation. 8. Driver may optionally get debug event with ID 0x97 which can be dropped For Intermediate loadger image, all the above steps are applicable expcept #5 and #6. On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait for it before passing control over to bluetooth stack. Co-developed-by: Devegowda Chandrashekar Signed-off-by: Devegowda Chandrashekar Signed-off-by: Kiran K Signed-off-by: Luiz Augusto von Dentz

bluetooth: Fix typos in the comments

2024-11-14T20:28:07+00:00

Correctly spelled comments make it easier for the reader to understand the code. Fix typos: 'fragement' ==> 'fragment', 'genration' ==> 'generation', 'funciton' ==> 'function', 'Explitly' ==> 'Explicitly', 'explaination' ==> 'explanation', 'Tranlate' ==> 'Translate', 'immediatelly' ==> 'immediately', 'isntance' ==> 'instance', 'transmittion' ==> 'transmission', 'recevie' ==> 'receive', 'outselves' ==> 'ourselves', 'conrol' ==> 'control'. Signed-off-by: Yan Zhen Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Luiz Augusto von Dentz

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Bluetooth: btintel: Allow configuring drive strength of BRI

2024-08-23T19:56:03+00:00

BRI (Bluetooth Radio Interface) traffic from CNVr to CNVi was found causing cross talk step errors to WiFi. To avoid this potential issue OEM platforms can replace BRI resistor to adjust the BRI response line drive strength. During the *setup*, driver reads the drive strength value from uefi variable and passes it to the controller via vendor specific command with opcode 0xfc0a. dmesg: .. [21.982720] Bluetooth: hci0: Bootloader timestamp 2023.33 buildtype 1 build 45995 [21.984250] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-iml.sfi [21.984255] Bluetooth: hci0: Boot Address: 0x30099000 [21.984256] Bluetooth: hci0: Firmware Version: 160-24.24 [22.011501] Bluetooth: hci0: Waiting for firmware download to complete [22.011518] Bluetooth: hci0: Firmware loaded in 26624 usecs [22.011584] Bluetooth: hci0: Waiting for device to boot [22.013546] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [22.013552] Bluetooth: hci0: Device booted in 1967 usecs ... [22.013792] Bluetooth: hci0: dsbr: enable: 0x01 value: 0x0b ... [22.015027] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291.sfi [22.015041] Bluetooth: hci0: Boot Address: 0x10000800 [22.015043] Bluetooth: hci0: Firmware Version: 160-24.24 [22.395821] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [22.395828] Bluetooth: BNEP filters: protocol multicast ... Signed-off-by: Kiran K Signed-off-by: Luiz Augusto von Dentz

Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-in

2024-08-15T17:07:55+00:00

This inverts the LE State quirk so by default we assume the controllers would report valid states rather than invalid which is how quirks normally behave, also this would result in HCI command failing it the LE States are really broken thus exposing the controllers that are really broken in this respect. Link: https://github.com/bluez/bluez/issues/584 Fixes: 220915857e29 ("Bluetooth: Adding driver and quirk defs for multi-role LE") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btintel: Fail setup on error

2024-07-26T14:53:56+00:00

Do not attempt to send any hci command to controller if *setup* function fails. Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support") Signed-off-by: Kiran K Signed-off-by: Luiz Augusto von Dentz