kernel/linux.git/drivers/bluetooth/btbcm.c, branch v5.10.264

Bluetooth: hci_bcm: Fall back to getting bdaddr from EFI if not set

2023-05-30T11:57:49+00:00

[ Upstream commit 0d218c3642b9ccf71f44987cd03c19320f3bd918 ] On some devices the BCM Bluetooth adapter does not have a valid bdaddr set. btbcm.c currently sets HCI_QUIRK_INVALID_BDADDR to indicate when this is the case. But this requires users to manual setup a btaddr, by doing e.g.: btmgmt -i hci0 public-addr 'B0:F1:EC:82:1D:B3' Which means that Bluetooth will not work out of the box on such devices. To avoid this (where possible) hci_bcm sets: HCI_QUIRK_USE_BDADDR_PROPERTY which tries to get the bdaddr from devicetree. But this only works on devicetree platforms. On UEFI based platforms there is a special Broadcom UEFI variable which when present contains the devices bdaddr, just like how there is another UEFI variable which contains wifi nvram contents including the wifi MAC address. Add support for getting the bdaddr from this Broadcom UEFI variable, so that Bluetooth will work OOTB for users on devices where this UEFI variable is present. This fixes Bluetooth not working on for example Asus T100HA 2-in-1s. Signed-off-by: Hans de Goede Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_bcm: Add BCM4349B1 variant

2022-08-11T11:06:45+00:00

commit 4f17c2b6694d0c4098f33b07ee3a696976940aa5 upstream. The BCM4349B1, aka CYW/BCM89359, is a WiFi+BT chip and its Bluetooth portion can be controlled over serial. Two subversions are added for the chip, because ROM firmware reports 002.002.013 (at least for the chips I have here), while depending on patchram firmware revision, either 002.002.013 or 002.002.014 is reported. Signed-off-by: Ahmad Fatoum Reviewed-by: Linus Walleij Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: btbcm: Added 003.006.007, changed 001.003.015

2020-05-28T08:28:12+00:00

Added new Broadcom device BCM4350C5, changed BCM4354A2 to BCM4356A2. Based on Broadcom Windows drivers 001.003.015 should be BCM4356A2. I have user report that firmware name is misplaced (https://github.com/winterheart/broadcom-bt-firmware/issues/3). Signed-off-by: Azamat H. Hackimov Signed-off-by: Marcel Holtmann

Bluetooth: btbcm: Add 2 missing models to subver tables

2020-04-22T17:43:59+00:00

Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for the BCM4324B5 and BCM20703A1 chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially is problematic with the UART attached BCM4324B5 where this leads to the filename being just "BCM.hcd". Add the 2 missing devices to subver tables. This has been tested on: 1. A Dell XPS15 9550 where this makes btbcm.c try to load "BCM20703A1-0a5c-6410.hcd" before it tries to load "BCM-0a5c-6410.hcd". 2. A Thinkpad 8 where this makes btbcm.c try to load "BCM4324B5.hcd" before it tries to load "BCM.hcd" Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann

Bluetooth: btbcm: Try multiple Patch filenames when loading the Patch firmware

2020-04-22T17:43:58+00:00

Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for various newer chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially a problem with UART attached devices where this leads to the filename being "BCM.hcd". If we add new entries to the subver-tables now, then this will change what firmware file the kernel looks for, e.g. currently linux-firmware contains a brcm/BCM-0bb4-0306.hcd file. If we add the info for the BCM20703A1 to the subver table, then this will change to brcm/BCM20703A1-0bb4-0306.hcd. This will cause the file to no longer get loaded breaking Bluetooth for existing users, going against the no regressions policy. To avoid this regression make the btbcm code try multiple filenames, first try the fullname, e.g. BCM20703A1-0bb4-0306.hcd and if that is not found, then fallback to the name with just BCM as prefix. This commit also adds an info message which filename was used, this makes the output look like this for example: [ 57.387867] Bluetooth: hci0: BCM20703A1 [ 57.387870] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0000 [ 57.389438] Bluetooth: hci0: BCM20703A1 'brcm/BCM20703A1-0a5c-6410.hcd' Patch [ 58.681769] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 58.681772] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann

Bluetooth: btbcm: Bail sooner from btbcm_initialize() when not loading fw

2020-04-22T17:43:58+00:00

If we have already loaded the firmware/patchram and btbcm_initialize() is called to re-init the HCI after this then there is no need to get the USB device-ids and build a firmware-filename out of these. Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann

Bluetooth: btbcm: Make btbcm_setup_patchram use btbcm_finalize

2020-04-22T17:43:58+00:00

On UART attached devices we do: 1. btbcm_initialize() 2. Setup UART baudrate, etc. 3. btbcm_finalize() After our previous changes we can now also use btbcm_finalize() from the btbcm_setup_patchram() function used on USB devices without any functional changes. This completes unifying the USB and UART paths as much as possible. Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann

Bluetooth: btbcm: Make btbcm_initialize() print local-name on re-init too

2020-04-22T17:43:58+00:00

Make btbcm_initialize() get and print the device's local-name on re-init too, this will make us also print the local-name after loading the Patch on UART attached devices making things more consistent. This also removes some code duplication from btbcm_setup_patchram() and allows more code duplication removal there in a follow-up patch. Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann

Bluetooth: btbcm: Fold Patch loading + applying into btbcm_initialize()

2020-04-22T17:43:58+00:00

Instead of having btbcm_initialize() fill a passed in fw_name buffer and then have its callers use that to request the firmware + load it into the HCI, make btbcm_initialize() do this itself the first time it is called (its get called a second time to reset the HCI after the firmware has been loaded). This removes some code duplication and makes it easier for further patches in this series to try more then 1 firmware filename. Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann

Bluetooth: btbcm: Move setting of USE_BDADDR_PROPERTY quirk to hci_bcm.c

2020-04-22T17:43:58+00:00

btbcm_finalize() is currently only used by UART attached BCM devices. Move the setting of the USE_BDADDR_PROPERTY quirk, which we only want for UART attached devices to hci_bcm in preparation for using btbcm_finalize() for USB attached devices too. Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann