kernel/linux.git/drivers/block, branch linux-2.6.35.y

nbd: limit module parameters to a sane value

2011-08-01T20:54:54+00:00

commit 3b2710824e00d238554c13b5add347e6c701ab1a upstream. The 'max_part' parameter controls the number of maximum partition a nbd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel oops (or, at least, produce invalid device nodes in some cases). In addition, specifying large 'nbds_max' value causes same problem for the same reason. On my desktop, following command results to the kernel bug: $ sudo modprobe nbd max_part=100000 kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/block/nbd4/range CPU 1 Modules linked in: nbd(+) bridge stp llc kvm_intel kvm asus_atk0110 sg sr_mod cdrom Pid: 2522, comm: modprobe Tainted: G W 2.6.39-leonard+ #159 System manufacturer System Product Name/P5G41TD-M PRO RIP: 0010:[] [] internal_create_group+0x2f/0x166 RSP: 0018:ffff8801009f1de8 EFLAGS: 00010246 RAX: 00000000ffffffef RBX: ffff880103920478 RCX: 00000000000a7bd3 RDX: ffffffff81a2dbe0 RSI: 0000000000000000 RDI: ffff880103920478 RBP: ffff8801009f1e38 R08: ffff880103920468 R09: ffff880103920478 R10: ffff8801009f1de8 R11: ffff88011eccbb68 R12: ffffffff81a2dbe0 R13: ffff880103920468 R14: 0000000000000000 R15: ffff880103920400 FS: 00007f3c49de9700(0000) GS:ffff88011f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f3b7fe7c000 CR3: 00000000cd58d000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2522, threadinfo ffff8801009f0000, task ffff8801009a93a0) Stack: ffff8801009f1e58 ffffffff812e8f6e ffff8801009f1e58 ffffffff812e7a80 ffff880000000010 ffff880103920400 ffff8801002fd0c0 ffff880103920468 0000000000000011 ffff880103920400 ffff8801009f1e48 ffffffff8115ab6a Call Trace: [] ? device_add+0x4f1/0x5e4 [] ? dev_set_name+0x41/0x43 [] sysfs_create_group+0x13/0x15 [] blk_trace_init_sysfs+0x14/0x16 [] blk_register_queue+0x4c/0xfd [] add_disk+0xe4/0x29c [] nbd_init+0x2ab/0x30d [nbd] [] ? 0xffffffffa007dfff [] do_one_initcall+0x7f/0x13e [] sys_init_module+0xa1/0x1e3 [] system_call_fastpath+0x16/0x1b Code: 41 57 41 56 41 55 41 54 53 48 83 ec 28 0f 1f 44 00 00 48 89 fb 41 89 f6 49 89 d4 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe b9 ea ff ff ff 48 83 7f 30 00 0f 84 09 01 00 00 49 RIP [] internal_create_group+0x2f/0x166 RSP ---[ end trace 753285ffbf72c57c ]--- Signed-off-by: Namhyung Kim Cc: Laurent Vivier Cc: Paul Clements Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman Signed-off-by: Andi Kleen

brd: handle on-demand devices correctly

2011-08-01T20:54:54+00:00

commit af46566885a373b0a526932484cd8fef8de7b598 upstream. When finding or allocating a ram disk device, brd_probe() did not take partition numbers into account so that it can result to a different device. Consider following example (I set CONFIG_BLK_DEV_RAM_COUNT=4 for simplicity) : $ sudo modprobe brd max_part=15 $ ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2011-05-25 15:41 /dev/ram0 brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1 brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2 brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3 $ sudo mknod /dev/ram4 b 1 64 $ sudo dd if=/dev/zero of=/dev/ram4 bs=4k count=256 256+0 records in 256+0 records out 1048576 bytes (1.0 MB) copied, 0.00215578 s, 486 MB/s namhyung@leonhard:linux$ ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2011-05-25 15:41 /dev/ram0 brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1 brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2 brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3 brw-r--r-- 1 root root 1, 64 2011-05-25 15:45 /dev/ram4 brw-rw---- 1 root disk 1, 1024 2011-05-25 15:44 /dev/ram64 After this patch, /dev/ram4 - instead of /dev/ram64 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that RAMDISK_MAJOR can address. It does not need to be limited by partition numbers unless 'rd_nr' param was specified. Signed-off-by: Namhyung Kim Cc: Laurent Vivier Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman Signed-off-by: Andi Kleen

brd: limit 'max_part' module param to DISK_MAX_PARTS

2011-08-01T20:54:54+00:00

commit 315980c8688c4b06713c1a5fe9d64cdf8ab57a72 upstream. The 'max_part' parameter controls the number of maximum partition a brd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe brd max_part=100000 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [] sysfs_create_dir+0x2d/0xae PGD 7af1067 PUD 7b19067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: brd(+) Pid: 44, comm: insmod Tainted: G W 2.6.39-qemu+ #158 Bochs Bochs RIP: 0010:[] [] sysfs_create_dir+0x2d/0xae RSP: 0018:ffff880007b15d78 EFLAGS: 00000286 RAX: ffff880007b05478 RBX: ffff880007a52760 RCX: ffff880007b15dc8 RDX: ffff880007a4f900 RSI: ffff880007b15e48 RDI: ffff880007a52760 RBP: ffff880007b15da8 R08: 0000000000000002 R09: 0000000000000000 R10: ffff880007b15e48 R11: ffff880007b05478 R12: 0000000000000000 R13: ffff880007b05478 R14: 0000000000400920 R15: 0000000000000063 FS: 0000000002160880(0063) GS:ffff880007c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000007b1c000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 44, threadinfo ffff880007b14000, task ffff880007acb980) Stack: ffff880007b15dc8 ffff880007b05478 ffff880007b15da8 00000000fffffffe ffff880007a52760 ffff880007b05478 ffff880007b15de8 ffffffff81143c0a 0000000000400920 ffff880007a52760 ffff880007b05478 0000000000000000 Call Trace: [] kobject_add_internal+0xdf/0x1a0 [] kobject_add_varg+0x41/0x50 [] kobject_add+0x64/0x66 [] blk_register_queue+0x5f/0xb8 [] add_disk+0xdf/0x289 [] brd_init+0xdf/0x1aa [brd] [] ? 0xffffffffa0003fff [] ? 0xffffffffa0003fff [] do_one_initcall+0x7a/0x12e [] sys_init_module+0x9c/0x1dc [] system_call_fastpath+0x16/0x1b Code: 89 e5 41 55 41 54 53 48 89 fb 48 83 ec 18 48 85 ff 75 04 0f 0b eb fe 48 8b 47 18 49 c7 c4 70 1e 4d 81 48 85 c0 74 04 4c 8b 60 30 8b 44 24 58 45 31 ed 0f b6 c4 85 c0 74 0d 48 8b 43 28 48 89 RIP [] sysfs_create_dir+0x2d/0xae RSP CR2: 0000000000000058 ---[ end trace aebb1175ce1f6739 ]--- Signed-off-by: Namhyung Kim Cc: Laurent Vivier Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman Signed-off-by: Andi Kleen

loop: handle on-demand devices correctly

2011-08-01T20:54:52+00:00

commit a1c15c59feee36267c43142a41152fbf7402afb6 upstream. When finding or allocating a loop device, loop_probe() did not take partition numbers into account so that it can result to a different device. Consider following example: $ sudo modprobe loop max_part=15 $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 $ sudo mknod /dev/loop8 b 7 128 $ sudo losetup /dev/loop8 ~/temp/disk-with-3-parts.img $ sudo losetup -a /dev/loop128: [0805]:278201 (/home/namhyung/temp/disk-with-3-parts.img) $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 2048 2011-05-24 22:18 /dev/loop128 brw-rw---- 1 root disk 7, 2049 2011-05-24 22:18 /dev/loop128p1 brw-rw---- 1 root disk 7, 2050 2011-05-24 22:18 /dev/loop128p2 brw-rw---- 1 root disk 7, 2051 2011-05-24 22:18 /dev/loop128p3 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 brw-r--r-- 1 root root 7, 128 2011-05-24 22:17 /dev/loop8 After this patch, /dev/loop8 - instead of /dev/loop128 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that LOOP_MAJOR can address. It does not need to be limited by partition numbers unless 'max_loop' param was specified. Signed-off-by: Namhyung Kim Cc: Laurent Vivier Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman Signed-off-by: Andi Kleen

loop: limit 'max_part' module param to DISK_MAX_PARTS

2011-08-01T20:54:52+00:00

commit 78f4bb367fd147a0e7e3998ba6e47109999d8814 upstream. The 'max_part' parameter controls the number of maximum partition a loop block device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe loop max_part0000 ------------[ cut here ]------------ kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: loop(+) Pid: 43, comm: insmod Tainted: G W 2.6.39-qemu+ #155 Bochs Bochs RIP: 0010:[] [] internal_create_group= +0x2a/0x170 RSP: 0018:ffff880007b3fde8 EFLAGS: 00000246 RAX: 00000000ffffffef RBX: ffff880007b3d878 RCX: 00000000000007b4 RDX: ffffffff8152da50 RSI: 0000000000000000 RDI: ffff880007b3d878 RBP: ffff880007b3fe38 R08: ffff880007b3fde8 R09: 0000000000000000 R10: ffff88000783b4a8 R11: ffff880007b3d878 R12: ffffffff8152da50 R13: ffff880007b3d868 R14: 0000000000000000 R15: ffff880007b3d800 FS: 0000000002137880(0063) GS:ffff880007c00000(0000) knlGS:00000000000000= 00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000422680 CR3: 0000000007b50000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 43, threadinfo ffff880007b3e000, task ffff880007afb9c= 0) Stack: ffff880007b3fe58 ffffffff811e66dd ffff880007b3fe58 ffffffff811e570b 0000000000000010 ffff880007b3d800 ffff880007a7b390 ffff880007b3d868 0000000000400920 ffff880007b3d800 ffff880007b3fe48 ffffffff8113cfc8 Call Trace: [] ? device_add+0x4bc/0x5af [] ? dev_set_name+0x3c/0x3e [] sysfs_create_group+0xe/0x12 [] blk_trace_init_sysfs+0x14/0x16 [] blk_register_queue+0x47/0xf7 [] add_disk+0xdf/0x290 [] loop_init+0xeb/0x1b8 [loop] [] ? 0xffffffffa0005fff [] do_one_initcall+0x7a/0x12e [] sys_init_module+0x9c/0x1e0 [] system_call_fastpath+0x16/0x1b Code: c3 55 48 89 e5 41 57 41 56 41 89 f6 41 55 41 54 49 89 d4 53 48 89 fb= 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe = 48 83 7f 30 00 b9 ea ff ff ff 0f 84 18 01 00 00 49 RIP [] internal_create_group+0x2a/0x170 RSP ---[ end trace a123eb592043acad ]--- Signed-off-by: Namhyung Kim Cc: Laurent Vivier Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman Signed-off-by: Andi Kleen

cciss: fix lost command issue

2011-03-31T18:58:49+00:00

commit 1ddd5049545e0aa1a0ed19bca4d9c9c3ce1ac8a2 upstream. Under certain workloads a command may seem to get lost. IOW, the Smart Array thinks all commands have been completed but we still have commands in our completion queue. This may lead to system instability, filesystems going read-only, or even panics depending on the affected filesystem. We add an extra read to force the write to complete. Testing shows this extra read avoids the problem. Signed-off-by: Mike Miller Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman Signed-off-by: Andi Kleen

xen: Provide a variant of __RING_SIZE() that is an integer constant expression

2011-02-06T19:03:40+00:00

commit 667c78afaec0ac500908e191e8f236e9578d7b1f upstream. Without this, gcc 4.5 won't compile xen-netfront and xen-blkfront, where this is being used to specify array sizes. Signed-off-by: Jan Beulich Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Andi Kleen Cc: Jens Axboe Cc: David Miller Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

Fix pktcdvd ioctl dev_minor range check

2010-12-14T22:40:18+00:00

Upstream 252a52aa4fa22a668f019e55b3aac3ff71ec1c29 The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a pktcdvd_device from the global pkt_devs array. The index into this array is provided directly by the user and is a signed integer, so the comparison to ensure that it falls within the bounds of this array will fail when provided with a negative index. This can be used to read arbitrary kernel memory or cause a crash due to an invalid pointer dereference. This can be exploited by users with permission to open /dev/pktcdvd/control (on many distributions, this is readable by group "cdrom"). Signed-off-by: Dan Rosenberg [ Rather than add a cast, just make the function take the right type -Linus ] Signed-off-by: Linus Torvalds Signed-off-by: Andi Kleen

virtio-blk: fix request leak.

2010-10-29T04:51:23+00:00

commit e4c4776dea9fd0295ebb3b215599d52938d6d7a3 upstream. Must drop reference taken by blk_make_request(). Signed-off-by: Mike Snitzer Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

drbd: Disable delay probes for the upcomming release

2010-08-13T20:30:52+00:00

commit 6710a5760355be8f2e51682f41b0d3fc76550309 upstream. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman