kernel/linux.git/drivers/block/nbd.c, branch v4.19.77

nbd: add missing config put

2019-10-05T11:09:45+00:00

[ Upstream commit 887e975c4172d0d5670c39ead2f18ba1e4ec8133 ] Fix bug added with the patch: commit 8f3ea35929a0806ad1397db99a89ffee0140822a Author: Josef Bacik Date: Mon Jul 16 12:11:35 2018 -0400 nbd: handle unexpected replies better where if the timeout handler runs when the completion path is and we fail to grab the mutex in the timeout handler we will leave a config reference and cannot free the config later. Reviewed-by: Josef Bacik Signed-off-by: Mike Christie Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

nbd: replace kill_bdev() with __invalidate_device() again

2019-08-06T17:06:55+00:00

commit 2b5c8f0063e4b263cf2de82029798183cf85c320 upstream. Commit abbbdf12497d ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc03649 ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc03649 ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse Reviewed-by: Josef Bacik Signed-off-by: Munehisa Kamata Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

nbd: Use set_blocksize() to set device blocksize

2019-01-22T20:40:38+00:00

commit c8a83a6b54d0ca078de036aafb3f6af58c1dc5eb upstream. NBD can update block device block size implicitely through bd_set_size(). Make it explicitely set blocksize with set_blocksize() as this behavior of bd_set_size() is going away. CC: Josef Bacik Signed-off-by: Jan Kara Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

nbd: don't allow invalid blocksize settings

2018-09-04T17:54:58+00:00

syzbot reports a divide-by-zero off the NBD_SET_BLKSIZE ioctl. We need proper validation of the input here. Not just if it's zero, but also if the value is a power-of-2 and in a valid range. Add that. Cc: stable@vger.kernel.org Reported-by: syzbot Reviewed-by: Josef Bacik Signed-off-by: Jens Axboe

Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net

2018-08-02T17:55:32+00:00

The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller

nbd: constify nla_policy

2018-07-20T19:33:37+00:00

The netlink policy should be const like other drivers. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller

nbd: handle unexpected replies better

2018-07-16T16:14:40+00:00

If the server or network is misbehaving and we get an unexpected reply we can sometimes miss the request not being started and wait on a request and never get a response, or even double complete the same request. Fix this by replacing the send_complete completion with just a per command lock. Add a per command cookie as well so that we can know if we're getting a double completion for a previous event. Also check to make sure we dont have REQUEUED set as that means we raced with the timeout handler and need to just let the retry occur. Signed-off-by: Josef Bacik Signed-off-by: Jens Axboe

nbd: don't requeue the same request twice.

2018-07-16T16:14:39+00:00

We can race with the snd timeout and the per-request timeout and end up requeuing the same request twice. We can't use the send_complete completion to tell if everything is ok because we hold the tx_lock during send, so the timeout stuff will block waiting to mark the socket dead, and we could be marked complete and still requeue. Instead add a flag to the socket so we know whether we've been requeued yet. Signed-off-by: Josef Bacik Signed-off-by: Jens Axboe

nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.

2018-06-21T01:10:06+00:00

If NBD_DISCONNECT_ON_CLOSE is set on a device, then the driver will issue a disconnect from nbd_release if the device has no remaining bdev->bd_openers. Fix ret val so reconfigure with only setting the flag succeeds. Reviewed-by: Josef Bacik Signed-off-by: Doron Roberts-Kedes Signed-off-by: Jens Axboe

nbd: set discard_alignment to the granularity

2018-06-05T15:50:46+00:00

Technically we should be able to get away with 0 as the discard_alignment, but there's no way currently for the protocol to indicate different alignments, and in real life most disks have discard_alignment == discard_granularity. Just set our alignment to our blocksize to make sure discards will actually work properly with 4k drives. Signed-off-by: Josef Bacik Signed-off-by: Jens Axboe