kernel/linux.git/drivers/bcma/Kconfig, branch v6.12.80

bcma: Allow selection of this driver when COMPILE_TEST=y

2018-07-18T07:34:19+00:00

This allows us to increase compile-test coverage without having to build a kernel for MIPS. That's particularly interesting for subsystem maintainers that want to test as many drivers as possible in a single build. We also add a dependency on HAS_IOMEM in BCMA_HOST_SOC to make sure the driver is not selected when the arch does not implement IO accessors. Signed-off-by: Boris Brezillon Acked-by: Kalle Valo Signed-off-by: Miquel Raynal

bcma: Prevent build of PCI host features in module

2018-03-13T16:47:47+00:00

Attempting to build bcma.ko with BCMA_DRIVER_PCI_HOSTMODE=y results in a build error due to use of symbols not exported from vmlinux: ERROR: "pcibios_enable_device" [drivers/bcma/bcma.ko] undefined! ERROR: "register_pci_controller" [drivers/bcma/bcma.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 To prevent this, don't allow the host mode feature to be built if CONFIG_BCMA=m Signed-off-by: Matt Redfearn Signed-off-by: Kalle Valo

bcma: Fix 'allmodconfig' and BCMA builds on MIPS targets

2018-01-16T19:13:55+00:00

Mips builds with BCMA host mode enabled fail in mainline and -next with: In file included from include/linux/bcma/bcma.h:10:0, from drivers/bcma/bcma_private.h:9, from drivers/bcma/main.c:8: include/linux/bcma/bcma_driver_pci.h:218:24: error: field 'pci_controller' has incomplete type Bisect points to commit d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as generic") as the culprit. Analysis shows that the commmit changes PCI configuration and enables PCI_DRIVERS_GENERIC. This in turn disables PCI_DRIVERS_LEGACY. 'struct pci_controller' is, however, only defined if PCI_DRIVERS_LEGACY is enabled. Ultimately that means that BCMA_DRIVER_PCI_HOSTMODE depends on PCI_DRIVERS_LEGACY. Add the missing dependency. Fixes: d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as ...") Cc: Matt Redfearn Cc: James Hogan Signed-off-by: Guenter Roeck Reviewed-by: James Hogan Signed-off-by: Kalle Valo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-11-04T00:26:51+00:00

Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

bcma: keep *config menu together

2017-10-13T09:37:21+00:00

Use "if BCMA"/"endif" around all Kconfig symbols so that they are kept together in *config menus instead of showing up in unexpected places. Also remove "depends on BCMA" since this is handled by the "if BCMA" addition. Tested with ARCH={x86_64,MIPS} using make {n,menu,g,x}config. Signed-off-by: Randy Dunlap Cc: Rafał Miłecki Signed-off-by: Kalle Valo

bcma: make BCMA a menuconfig to ease disabling it all

2017-08-08T11:44:40+00:00

No need to get into the submenu to disable all BCMA-related config entries. Signed-off-by: Vincent Legoll Signed-off-by: Kalle Valo

bcma: allow enabling serial flash support on non-MIPS SoCs

2016-07-18T19:43:35+00:00

So far we had only MIPS devices with serial flash connected to the SoC's ChipCommon. ARM devices got a separated SPI controller and weere using standard SPI drivers. This has changed with the wireless SoC BCM47189B0. It's ARM based but has serial flash attached just like older devices. This allows using existing driver with these devices. Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo

bcma: move parallel flash support to separated file

2016-03-07T12:41:08+00:00

This follows the way of handling other flashes and cleans code a bit. As next task we will want to move flash code to ChipCommon driver as: 1) Flash controllers are accesible using ChipCommon registers 2) This code isn't MIPS specific This change prepares bcma for that. Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo

bcma: switch GPIO portions to use GPIOLIB_IRQCHIP

2015-08-18T06:08:47+00:00

This switches the BCMA GPIO driver to use GPIOLIB_IRQCHIP to handle its interrupts instead of rolling its own copy of the irqdomain handling etc. Signed-off-by: Linus Walleij Signed-off-by: Hauke Mehrtens Signed-off-by: Kalle Valo