kernel/linux.git/drivers/base, branch v6.10.9

regmap: spi: Fix potential off-by-one when calculating reserved size

2024-09-08T05:56:35+00:00

[ Upstream commit d4ea1d504d2701ba04412f98dc00d45a104c52ab ] If we ever meet a hardware that uses weird register bits and padding, we may end up in off-by-one error since x/8 + y/8 might not be equal to (x + y)/8 in some cases. bits pad x/8+y/8 (x+y)/8 4..7 0..3 0 0 // x + y from 4 up to 7 4..7 4..7 0 1 // x + y from 8 up to 11 4..7 8..11 1 1 // x + y from 12 up to 15 8..15 0..7 1 1 // x + y from 8 up to 15 8..15 8..15 2 2 // x + y from 16 up to 23 Fix this by using (x+y)/8. Signed-off-by: Andy Shevchenko Link: https://msgid.link/r/20240605205315.19132-1-andy.shevchenko@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

driver core: Fix uevent_show() vs driver detach race

2024-08-14T13:34:29+00:00

commit 15fffc6a5624b13b428bb1c6e9088e32a55eb82c upstream. uevent_show() wants to de-reference dev->driver->name. There is no clean way for a device attribute to de-reference dev->driver unless that attribute is defined via (struct device_driver).dev_groups. Instead, the anti-pattern of taking the device_lock() in the attribute handler risks deadlocks with code paths that remove device attributes while holding the lock. This deadlock is typically invisible to lockdep given the device_lock() is marked lockdep_set_novalidate_class(), but some subsystems allocate a local lockdep key for @dev->mutex to reveal reports of the form: ====================================================== WARNING: possible circular locking dependency detected 6.10.0-rc7+ #275 Tainted: G OE N ------------------------------------------------------ modprobe/2374 is trying to acquire lock: ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220 but task is already holding lock: ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&cxl_root_key){+.+.}-{3:3}: __mutex_lock+0x99/0xc30 uevent_show+0xac/0x130 dev_attr_show+0x18/0x40 sysfs_kf_seq_show+0xac/0xf0 seq_read_iter+0x110/0x450 vfs_read+0x25b/0x340 ksys_read+0x67/0xf0 do_syscall_64+0x75/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (kn->active#6){++++}-{0:0}: __lock_acquire+0x121a/0x1fa0 lock_acquire+0xd6/0x2e0 kernfs_drain+0x1e9/0x200 __kernfs_remove+0xde/0x220 kernfs_remove_by_name_ns+0x5e/0xa0 device_del+0x168/0x410 device_unregister+0x13/0x60 devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1c7/0x210 driver_detach+0x47/0x90 bus_remove_driver+0x6c/0xf0 cxl_acpi_exit+0xc/0x11 [cxl_acpi] __do_sys_delete_module.isra.0+0x181/0x260 do_syscall_64+0x75/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e The observation though is that driver objects are typically much longer lived than device objects. It is reasonable to perform lockless de-reference of a @driver pointer even if it is racing detach from a device. Given the infrequency of driver unregistration, use synchronize_rcu() in module_remove_driver() to close any potential races. It is potentially overkill to suffer synchronize_rcu() just to handle the rare module removal racing uevent_show() event. Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1]. Fixes: c0a40097f0bc ("drivers: core: synchronize really_probe() and dev_uevent()") Reported-by: syzbot+4762dd74e32532cda5ff@syzkaller.appspotmail.com Reported-by: Tetsuo Handa Closes: http://lore.kernel.org/5aa5558f-90a4-4864-b1b1-5d6784c5607d@I-love.SAKURA.ne.jp [1] Link: http://lore.kernel.org/669073b8ea479_5fffa294c1@dwillia2-xfh.jf.intel.com.notmuch Cc: stable@vger.kernel.org Cc: Ashish Sangwan Cc: Namjae Jeon Cc: Dirk Behme Cc: Greg Kroah-Hartman Cc: Rafael J. Wysocki Signed-off-by: Dan Williams Link: https://lore.kernel.org/r/172081332794.577428.9738802016494057132.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Greg Kroah-Hartman

regmap: kunit: Fix memory leaks in gen_regmap() and gen_raw_regmap()

2024-08-14T13:34:05+00:00

[ Upstream commit c3820641da87442251e0c00b6874ef1022da8f58 ] - Use kunit_kcalloc() to allocate the defaults table so that it will be freed when the test case ends. - kfree() the buf and *data buffers on the error paths. - Use kunit_add_action_or_reset() instead of kunit_add_action() so that if it fails it will call regmap_exit(). Signed-off-by: Richard Fitzgerald Link: https://msgid.link/r/20240411103724.54063-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

devres: Fix memory leakage caused by driver API devm_free_percpu()

2024-08-03T07:00:49+00:00

commit bd50a974097bb82d52a458bd3ee39fb723129a0c upstream. It will cause memory leakage when use driver API devm_free_percpu() to free memory allocated by devm_alloc_percpu(), fixed by using devres_release() instead of devres_destroy() within devm_free_percpu(). Fixes: ff86aae3b411 ("devres: add devm_alloc_percpu()") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu Link: https://lore.kernel.org/r/1719931914-19035-3-git-send-email-quic_zijuhu@quicinc.com Signed-off-by: Greg Kroah-Hartman

devres: Fix devm_krealloc() wasting memory

2024-08-03T07:00:49+00:00

commit c884e3249f753dcef7a2b2023541ac1dc46b318e upstream. Driver API devm_krealloc() calls alloc_dr() with wrong argument @total_new_size, so causes more memory to be allocated than required fix this memory waste by using @new_size as the argument for alloc_dr(). Fixes: f82485722e5d ("devres: provide devm_krealloc()") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu Link: https://lore.kernel.org/r/1719931914-19035-2-git-send-email-quic_zijuhu@quicinc.com Signed-off-by: Greg Kroah-Hartman

drivers: core: synchronize really_probe() and dev_uevent()

2024-06-04T16:14:51+00:00

Synchronize the dev->driver usage in really_probe() and dev_uevent(). These can run in different threads, what can result in the following race condition for dev->driver uninitialization: Thread #1: ========== really_probe() { ... probe_failed: ... device_unbind_cleanup(dev) { ... dev->driver = NULL; // <= Failed probe sets dev->driver to NULL ... } ... } Thread #2: ========== dev_uevent() { ... if (dev->driver) // If dev->driver is NULLed from really_probe() from here on, // after above check, the system crashes add_uevent_var(env, "DRIVER=%s", dev->driver->name); ... } really_probe() holds the lock, already. So nothing needs to be done there. dev_uevent() is called with lock held, often, too. But not always. What implies that we can't add any locking in dev_uevent() itself. So fix this race by adding the lock to the non-protected path. This is the path where above race is observed: dev_uevent+0x235/0x380 uevent_show+0x10c/0x1f0 <= Add lock here dev_attr_show+0x3a/0xa0 sysfs_kf_seq_show+0x17c/0x250 kernfs_seq_show+0x7c/0x90 seq_read_iter+0x2d7/0x940 kernfs_fop_read_iter+0xc6/0x310 vfs_read+0x5bc/0x6b0 ksys_read+0xeb/0x1b0 __x64_sys_read+0x42/0x50 x64_sys_call+0x27ad/0x2d30 do_syscall_64+0xcd/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Similar cases are reported by syzkaller in https://syzkaller.appspot.com/bug?extid=ffa8143439596313a85a But these are regarding the *initialization* of dev->driver dev->driver = drv; As this switches dev->driver to non-NULL these reports can be considered to be false-positives (which should be "fixed" by this commit, as well, though). The same issue was reported and tried to be fixed back in 2015 in https://lore.kernel.org/lkml/1421259054-2574-1-git-send-email-a.sangwan@samsung.com/ already. Fixes: 239378f16aa1 ("Driver core: add uevent vars for devices of a class") Cc: stable Cc: syzbot+ffa8143439596313a85a@syzkaller.appspotmail.com Cc: Ashish Sangwan Cc: Namjae Jeon Signed-off-by: Dirk Behme Link: https://lore.kernel.org/r/20240513050634.3964461-1-dirk.behme@de.bosch.com Signed-off-by: Greg Kroah-Hartman

driver core: remove devm_device_add_groups()

2024-06-04T13:53:36+00:00

There is no more in-kernel users of this function, and no driver should ever be using it, so remove it from the kernel. Acked-by: Dmitry Torokhov Acked-by: "Rafael J. Wysocki" Link: https://lore.kernel.org/r/20230704131715.44454-8-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

regmap-i2c: Subtract reg size from max_write

2024-05-27T00:30:33+00:00

Currently, when an adapter defines a max_write_len quirk, the data will be chunked into data sizes equal to the max_write_len quirk value. But the payload will be increased by the size of the register address before transmission. The resulting value always ends up larger than the limit set by the quirk. Avoid this error by setting regmap's max_write to the quirk's max_write_len minus the number of bytes for the register and padding. This allows the chunking to work correctly for this limited case without impacting other use-cases. Signed-off-by: Jim Wylder Link: https://msgid.link/r/20240523211437.2839942-1-jwylder@google.com Signed-off-by: Mark Brown

Merge tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

2024-05-23T20:38:31+00:00

Pull regmap fix from Mark Brown: "Guenter ran with memory sanitisers and found an issue in the new KUnit tests that Richard added where an assumption in older test code was exposed, this was fixed quickly by Richard" * tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: kunit: Fix array overflow in stride() test

tracing/treewide: Remove second parameter of __assign_str()

2024-05-23T00:14:47+00:00

With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/$__assign_str([^,]*[^ ,]$ *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Linus Torvalds Cc: Julia Lawall Signed-off-by: Steven Rostedt (Google) Acked-by: Jani Nikula Acked-by: Christian König for the amdgpu parts. Acked-by: Thomas Hellström #for Acked-by: Rafael J. Wysocki # for thermal Acked-by: Takashi Iwai Acked-by: Darrick J. Wong # xfs Tested-by: Guenter Roeck