kernel/linux.git/drivers/base, branch v4.9.303

regmap: Fix possible double-free in regcache_rbtree_exit()

2021-11-02T16:39:23+00:00

commit 55e6d8037805b3400096d621091dfbf713f97e83 upstream. In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows: BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390 Call Trace: slab_free_freelist_hook+0x10d/0x240 kfree+0xce/0x390 regcache_rbtree_exit+0x15d/0x1a0 regcache_rbtree_init+0x224/0x2c0 regcache_init+0x88d/0x1310 __regmap_init+0x3151/0x4a80 __devm_regmap_init+0x7d/0x100 madera_spi_probe+0x10f/0x333 [madera_spi] spi_probe+0x183/0x210 really_probe+0x285/0xc30 To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails. Reported-by: Hulk Robot Fixes: 3f4ff561bc88b ("regmap: rbtree: Make cache_present bitmap per node") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20211012023735.1632786-1-yangyingliang@huawei.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

PM / wakeirq: Fix unbalanced IRQ enable for wakeirq

2021-09-26T11:36:17+00:00

commit 69728051f5bf15efaf6edfbcfe1b5a49a2437918 upstream. If a device is runtime PM suspended when we enter suspend and has a dedicated wake IRQ, we can get the following warning: WARNING: CPU: 0 PID: 108 at kernel/irq/manage.c:526 enable_irq+0x40/0x94 [ 102.087860] Unbalanced enable for IRQ 147 ... (enable_irq) from [] (dev_pm_arm_wake_irq+0x4c/0x60) (dev_pm_arm_wake_irq) from [] (device_wakeup_arm_wake_irqs+0x58/0x9c) (device_wakeup_arm_wake_irqs) from [] (dpm_suspend_noirq+0x10/0x48) (dpm_suspend_noirq) from [] (suspend_devices_and_enter+0x30c/0xf14) (suspend_devices_and_enter) from [] (enter_state+0xad4/0xbd8) (enter_state) from [] (pm_suspend+0x38/0x98) (pm_suspend) from [] (state_store+0x68/0xc8) This is because the dedicated wake IRQ for the device may have been already enabled earlier by dev_pm_enable_wake_irq_check(). Fix the issue by checking for runtime PM suspended status. This issue can be easily reproduced by setting serial console log level to zero, letting the serial console idle, and suspend the system from an ssh terminal. On resume, dmesg will have the warning above. The reason why I have not run into this issue earlier has been that I typically run my PM test cases from on a serial console instead over ssh. Fixes: c84345597558 (PM / wakeirq: Enable dedicated wakeirq for suspend) Signed-off-by: Tony Lindgren Signed-off-by: Rafael J. Wysocki Signed-off-by: Nobuhiro Iwamatsu (CIP) Signed-off-by: Greg Kroah-Hartman

regmap: fix the offset of register error log

2021-09-22T09:42:58+00:00

[ Upstream commit 1852f5ed358147095297a09cc3c6f160208a676d ] This patch fixes the offset of register error log by using regmap_get_offset(). Signed-off-by: Jeongtae Park Link: https://lore.kernel.org/r/20210701142630.44936-1-jeongtae.park@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

PM / wakeirq: Enable dedicated wakeirq for suspend

2021-09-22T09:42:56+00:00

commit c84345597558349474f55be2b7d4093256e42884 upstream. We currently rely on runtime PM to enable dedicated wakeirq for suspend. This assumption fails in the following two cases: 1. If the consumer driver does not have runtime PM implemented, the dedicated wakeirq never gets enabled for suspend 2. If the consumer driver has runtime PM implemented, but does not idle in suspend Let's fix the issue by always enabling the dedicated wakeirq during suspend. Depends-on: bed570307ed7 (PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend) Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Reported-by: Keerthy Tested-by: Keerthy Signed-off-by: Grygorii Strashko [ tony@atomide.com: updated based on bed570307ed7, added description ] Tested-by: Tony Lindgren Signed-off-by: Tony Lindgren Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PCI/MSI: Protect msi_desc::masked for multi-MSI

2021-08-26T12:37:24+00:00

commit 77e89afc25f30abd56e76a809ee2884d7c1b63ce upstream. Multi-MSI uses a single MSI descriptor and there is a single mask register when the device supports per vector masking. To avoid reading back the mask register the value is cached in the MSI descriptor and updates are done by clearing and setting bits in the cache and writing it to the device. But nothing protects msi_desc::masked and the mask register from being modified concurrently on two different CPUs for two different Linux interrupts which belong to the same multi-MSI descriptor. Add a lock to struct device and protect any operation on the mask and the mask register with it. This makes the update of msi_desc::masked unconditional, but there is no place which requires a modification of the hardware register without updating the masked cache. msi_mask_irq() is now an empty wrapper which will be cleaned up in follow up changes. The problem goes way back to the initial support of multi-MSI, but picking the commit which introduced the mask cache is a valid cut off point (2.6.30). Fixes: f2440d9acbe8 ("PCI MSI: Refactor interrupt masking code") Signed-off-by: Thomas Gleixner Tested-by: Marc Zyngier Reviewed-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.726833414@linutronix.de Signed-off-by: Greg Kroah-Hartman

Revert "device property: Keep secondary firmware node secondary by type"

2021-01-12T18:49:05+00:00

commit 47f4469970d8861bc06d2d4d45ac8200ff07c693 upstream. While commit d5dcce0c414f ("device property: Keep secondary firmware node secondary by type") describes everything correct in its commit message, the change it made does the opposite and original commit c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") was fully correct. Revert the former one here and improve documentation in the next patch. Fixes: d5dcce0c414f ("device property: Keep secondary firmware node secondary by type") Signed-off-by: Bard Liao Reviewed-by: Andy Shevchenko Reviewed-by: Heikki Krogerus Cc: 5.10+ # 5.10+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

device property: Don't clear secondary pointer for shared primary firmware node

2020-11-10T09:24:00+00:00

commit 99aed9227073fb34ce2880cbc7063e04185a65e1 upstream. It appears that firmware nodes can be shared between devices. In such case when a (child) device is about to be deleted, its firmware node may be shared and ACPI_COMPANION_SET(..., NULL) call for it breaks the secondary link of the shared primary firmware node. In order to prevent that, check, if the device has a parent and parent's firmware node is shared with its child, and avoid crashing the link. Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") Reported-by: Ferry Toth Signed-off-by: Andy Shevchenko Reviewed-by: Heikki Krogerus Tested-by: Ferry Toth Cc: 5.9+ # 5.9+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

device property: Keep secondary firmware node secondary by type

2020-11-10T09:24:00+00:00

commit d5dcce0c414fcbfe4c2037b66ac69ea5f9b3f75c upstream. Behind primary and secondary we understand the type of the nodes which might define their ordering. However, if primary node gone, we can't maintain the ordering by definition of the linked list. Thus, by ordering secondary node becomes first in the list. But in this case the meaning of it is still secondary (or auxiliary). The type of the node is maintained by the secondary pointer in it: secondary pointer Meaning NULL or valid primary node ERR_PTR(-ENODEV) secondary node So, if by some reason we do the following sequence of calls set_primary_fwnode(dev, NULL); set_primary_fwnode(dev, primary); we should preserve secondary node. This concept is supported by the description of set_primary_fwnode() along with implementation of set_secondary_fwnode(). Hence, fix the commit c15e1bdda436 to follow this as well. Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") Cc: Ferry Toth Signed-off-by: Andy Shevchenko Reviewed-by: Heikki Krogerus Tested-by: Ferry Toth Cc: 5.9+ # 5.9+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

driver core: Fix probe_count imbalance in really_probe()

2020-10-14T07:48:15+00:00

commit b292b50b0efcc7095d8bf15505fba6909bb35dce upstream. syzbot is reporting hung task in wait_for_device_probe() [1]. At least, we always need to decrement probe_count if we incremented probe_count in really_probe(). However, since I can't find "Resources present before probing" message in the console log, both "this message simply flowed off" and "syzbot is not hitting this path" will be possible. Therefore, while we are at it, let's also prepare for concurrent wait_for_device_probe() calls by replacing wake_up() with wake_up_all(). [1] https://syzkaller.appspot.com/bug?id=25c833f1983c9c1d512f4ff860dd0d7f5a2e2c0f Reported-by: syzbot Fixes: 7c35e699c88bd607 ("driver core: Print device when resources present in really_probe()") Cc: Geert Uytterhoeven Signed-off-by: Tetsuo Handa Cc: stable Link: https://lore.kernel.org/r/20200713021254.3444-1-penguin-kernel@I-love.SAKURA.ne.jp [iwamatsu: Drop patch for deferred_probe_timeout_work_func()] Signed-off-by: Nobuhiro Iwamatsu (CIP) Signed-off-by: Greg Kroah-Hartman

device property: Fix the secondary firmware node handling in set_primary_fwnode()

2020-09-03T09:21:22+00:00

commit c15e1bdda4365a5f17cdadf22bf1c1df13884a9e upstream. When the primary firmware node pointer is removed from a device (set to NULL) the secondary firmware node pointer, when it exists, is made the primary node for the device. However, the secondary firmware node pointer of the original primary firmware node is never cleared (set to NULL). To avoid situation where the secondary firmware node pointer is pointing to a non-existing object, clearing it properly when the primary node is removed from a device in set_primary_fwnode(). Fixes: 97badf873ab6 ("device property: Make it possible to use secondary firmware nodes") Cc: All applicable Signed-off-by: Heikki Krogerus Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman